Electrode Holders / Welding Grounds
Other Related Pages
- MonotaRO Welding Rod HolderWelding rod holder used for arc welding. You can easily clip the welding rod. * Be sure to perform maintenance and inspection before use. * Because it is an imported product, there may be some paint peeling or scratches, but there is no problem in using it.Welding Current (A) 200 Compatible cable (mm2) 22~38 Suitable Welding Rod (mm) 2~5 Wire Connection Screw
- MonotaRO Earth ClipThe current is not interrupted, preventing the deterioration of conventional work efficiency and the burning of electric wires and welding machines. * Never touch it with your bare hands while working. * Do not use around combustible materials.Maximum Pinching Thickness (mm) 28 Welding Current (A) 300 Compatible cable (mm2) 35~70 Mass (g) 385 Specification Wire connection method (screw fastening)
- MonotaRO Earth clip vise typeThe current is not interrupted, preventing the deterioration of conventional work efficiency and the burning of electric wires and welding machines. * Never touch it with your bare hands while working. * Do not use around combustible materials. * Make sure to connect the cable securely before use.Welding Current (A) 300 Compatible cable (mm2) 35~70 Maximum Pinching Thickness (mm) 45 Mass (g) 460 Material Brass
- Sanritsu Electric Industry Welding Rod HolderThe main body metal fittings are a forged product that is unparalleled, and are incomparably superior in strength, wear resistance, heat resistance, temperature rise, etc. Unlike molded products, the handle is made of a special resin, so it is highly elastic and can withstand strong impacts toget... Read MoreCompatible cable (mm2) 22~50 Length (mm) 235 Suitable Rod Diameter (mm) 3.2~6.0 Welding Current (A) 300 Mass (g) 435 RoHS directive (corresponding to 10 substances) Correspondence
- SAKAGUCHI Earth clip (vise type)Compact design * Use at the JIS standard usage rate (60%). * Use with a current within the range.
- Sanritsu Electric Industry Copper tube for welding rod holderPipe Diameter (Φmm) 11 Length (mm) 35
- SAKAGUCHI Earth clipStrong due to cast iron body * Use at the JIS standard usage rate (60%). Use with a current within the range.Electric wire used 22~38mm2 Main Unit Dimensions, Length (mm) 175 Mass (g) 330 Maximum Pinching Thickness (mm) 28 Welding Current (A) 300 Specification Clip-type ground for arc welding
- Sanritsu Electric Industry Grounding ClipThe ground connection is complete and the current is not interrupted, so there is no need to worry about the conventional work efficiency being reduced and the wires and welding machines being burnt.Compatible cable (mm2) 22~50 Clamping Thickness (mm) 25 Maximum Pinching Thickness (mm) 25 Welding Current (A) 300 Mass (g) 380 RoHS directive (corresponding to 10 substances) Correspondence Specification Wire connection method (screw fastening)
- Sanritsu Electric Industry Earth clip copper tube for M300Pipe Diameter (Φmm) 11 Length (mm) 30 Welding Current (A) 300 RoHS directive (corresponding to 10 substances) Correspondence
- STAR ELECTRIC MANUFACTURING (SUZUKID) Safety holder tip coverIt looks beautiful, has perfect insulation, and has perfect heat resistance. A tip cover set for replacing the safety holder. For electric welding.Type For safety holder (300A)
- MonotaRO Welding rod holder top and bottom cover replacementTop and bottom covers for welding rod holders (replacement replacement parts) * Do not use for anything other than its intended purpose.Welding Current (A) 200 Included Accessories 3 screws Material Thermosetting resin
- NICHIDO IND Holder clip for welding machineClip Sanritsu S-300 Holder (Screw)
- Sanritsu Electric Industry For SJ type welding rod holder + screwIt is compatible with the new JIS standard C9300-11 and has been certified by JET (Electrical Appliance and Material Safety Association). A special glass fiber resin is used for the insulating cover to further improve the strength and heat resistance. The metal part of the main body has passed al... Read More
- Sanritsu Electric Industry Holder top and bottom cover for S300Welding Current (A) 300 RoHS directive (corresponding to 10 substances) Correspondence Suitable Model S300
- NICHIDO IND Earth clip for welding machineHolder Mitsutani EA300 ground clip (screw)
- STAR ELECTRIC MANUFACTURING (SUZUKID) Safety holder 300AWelding rod holder used for manual welding work of electric arc welding. It can be used for arc welders up to 300A. Safety holder for electric weldingDimensions, Width W x Height H x Depth D (mm) 74×235×24 Suitable Welding Rod (mm) 1.4~6.0 Mass (g) 366 Included Accessories Copper tube, hexagon wrench, 2 screws Suitable Wire 38sq or less Welding Current (A) 300 (70% usage rate)
- Sanritsu Electric Industry Grounding ClipThe ground connection is complete and the current is not interrupted, so there is no need to worry about the conventional work efficiency being reduced and the wires and welding machines being burnt.
- STAR ELECTRIC MANUFACTURING (SUZUKID) Safety holder 300A boxedA holder for arc welding replacement. It can be used for arc welders up to 300A. Arc welding replacement holder.Suitable Rod Diameter (mm) 1.4~6.4 Wire cross section (mm 2 ) 38 Suitable Wire 38sq or less Duty Cycle (%) 70
- STAR ELECTRIC MANUFACTURING (SUZUKID) Cover set for safety holderIt looks beautiful, has perfect insulation, and has perfect heat resistance. A tip cover set for replacing the safety holder. For electric weldingSpecification For safety holder (300A)
- TRUSCO Welding rod holder 300AClamp the welding rodSuitable Rod Diameter (mm) 1.6~6.0 Welding Current (A) 100-300 Compatible cable (mm2) 22-50 Overall Length (mm) 225 Trusco Part No. 256-2057 Mass (g) 420 Wire Connection Screwfrom ₱1,849.84Min. 2 days
- Sanritsu Electric Industry Grounding ClipThe ground connection is complete and the current is not interrupted, so there is no need to worry about the conventional work efficiency being reduced and the wires and welding machines being burnt.Welding Current (A) 300 Clamping Thickness (mm) 35 Maximum Pinching Thickness (mm) 35 Mass (g) 550 RoHS directive (corresponding to 10 substances) Correspondence Specification Wire connection method (screw fastening)
- MonotaRO Upper and lower covers for welding rod holder replacement* Do not use for anything other than its intended purpose.Material Fabric molding compound (cover) Included Accessories 3 screws Suitable for Monotaro for welding rod holder
- SAKAGUCHI Safety holder SH-300 (screw type)Suitable Welding Rod (mm) 3.2~6 Electric wire used 22~38mm2 Mass (g) 400 Overall Length (mm) 230from ₱1,233.09Min. 2 days
- SAKAGUCHI Grounding ClipStrong due to cast iron body * Use at the JIS standard usage rate (60%). Use with a current within the range.Electric wire used 22~38mm2 Specification Clip-type ground for arc welding
- STAR ELECTRIC MANUFACTURING (SUZUKID) Earth clip boxFor ground clip 300A for electric welding machines. Casting type earth clip P-45.Material Casting Duty Cycle (%) 70 Clamping Thickness (mm) Up to 25 Welding Current (A) 300from ₱1,233.09Min. 2 days
- TRUSCO Earth clampFor ground connection during welding.Wire Connection Screwfrom ₱2,425.48Min. 2 days
- STAR ELECTRIC MANUFACTURING (SUZUKID) Copper tube set 38sqCrimping type copper tube terminal. Cable connection from 14sq to 38sq is possible. Crimping type copper tube terminal.Material Copper Specification For 38sqfrom ₱254.51Min. 2 days
- STAR ELECTRIC MANUFACTURING (SUZUKID) Copper tube set for 22sqUsed for connecting electric welding terminal equipment and electric wires. Connection between electric welding terminal equipment and electric wires.Applicable Wire Size For 22sqfrom ₱328.52Min. 2 days
- Sanritsu Electric Industry Vise type earth clip miniNo tools are required for mounting on welds. Since the terminal part is made of special copper alloy, the electrical conductivity is the highest. Complete setting is possible by pressurizing the screws. One-touch wire connection with just the included hex wrench. Lightweight and compact.Welding Current (A) 100~330 Dimension (mm) 125×67 Maximum Pinching Thickness (mm) 42 Mass (g) 440 RoHS directive (corresponding to 10 substances) Correspondence Specification Wire tolerance / 22-38mm 2
- ESCO Φ89mm / 800A Earth holder (Magnet type)It can be used for large-scale welding work where alligator clips and G clamps cannot be used. There is a spring protrusion in the center, so it does not stick to metal without permission.Dimensions (Length L x Width W x Height H) (mm) 160×86×60 Esco Part No. EA315-18 Mass (g) 839 Allowable Current (A) 800 magnet used Isotropic ferrite magnetfrom ₱5,752.23Min. 2 days
- TRUSCO Welding rod holder top and bottom cover set (for TEH-300)Clamp the welding rodMass (g) 52.5 Trusco Part No. 270-7977from ₱410.76Min. 2 days
- TRUSCO Earth clipperFor ground connection during weldingWelding Current (A) 100-300 Overall Length (mm) 205 Compatible cable (mm2) 22-50 Trusco Part No. 256-2073 Clamping Thickness (mm) 30 Mass (g) 495 Wire Connection Screw Type With gripfrom ₱2,055.43Min. 2 days
- Sanritsu Electric Industry Lower insulation cover for welding rod holderPart No. 1 RoHS directive (corresponding to 10 substances) Correspondence Suitable Model S300
- STAR ELECTRIC MANUFACTURING (SUZUKID) Vise type earth clip 300AYou can get a solid ground everywhere. It is a vise type for 300A. Vise type ground clip for electric weldingMass (g) 445 Dimensions, Width W x Height H x Depth D (mm) 65×130×39 Specification For 300Afrom ₱1,603.14Min. 2 days
- Sanritsu Electric Industry Spring pressure type earth clipMaximum Pinching Thickness (mm) 20 Welding Current (A) 300 Mass (g) 410 RoHS directive (corresponding to 10 substances) Correspondence Wire Connection Screwfrom ₱1,767.61Min. 2 days
- Sanritsu Electric Industry Wire Connection ScrewRoHS directive (corresponding to 10 substances) Correspondencefrom ₱38.24Min. 2 days
- Sanritsu Electric Industry SJ type welding holder parts upper insulation coverType Upper insulation cover (screw type)from ₱390.20Min. 2 days
- ESCO Φ89mm / 250A Earth holder (Magnet type)It can be used for large-scale welding work where alligator clips and G clamps cannot be used. There is a spring protrusion in the center, so it does not stick to metal without permission.Mass (g) 794 Allowable Current (A) 250 Esco Part No. EA315-17 magnet used Isotropic ferrite magnet Dimensions (Length L x Width W x Height H) (mm) 160×86×60from ₱4,929.90Min. 2 days
Filter by categories