Welding Cable
Other Related Pages
- Fuji Electric Wire (Shikoku) Cabtire cable for weldingSince natural rubber is used for the sheath, it has excellent flexibility and cold resistance. It is inferior in weather resistance, flame resistance, and oil resistance. The most popular type of annealed copper assembly stranded wire wrapped with insulating tape and covered with natural rubber I... Read MoreAct on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) Correspondence
- FUJI ELECTRIC WIRE INDUSTRIES Cabtire Tire WCTThe most popular type with insulating tape wrapped around annealed copper assembly stranded wire and covered with natural rubber. Natural rubber sheath cable for lead wiresRoHS directive (corresponding to 10 substances) Correspondence
- MITSUBOSHI Cabtire Cable WCT for WeldingBecause it uses elastic and tough natural rubber, it exhibits sufficient strength against impact and wear. This cable is used on the secondary side of the welding machine. It can be divided into a lead wire cable used for extension from the welding machine and a holder cable used at hand for weld... Read More
- Sakai Dengyo Cabtire cable for welding WCTSakai Denshi's welding cables are marked with W on both sides of the wire by repeating 1m to 10m, so it is very easy to see and the dimension display remains on both ends even after cutting. It can be used very conveniently for sold-out inventory and for cutting by users.Wire Diameter (mm) 0.45 Color Black Type Natural rubber sheathed cable
- Sakai Dengyo Color cabtyre cable for welding WCTSakai Denshi's welding cables are marked with W on both sides of the wire by repeating 1m to 10m, so it is very easy to see and the dimension display remains on both ends even after cutting. It can be used very conveniently for sold-out inventory and for cutting by users.Wire Diameter (mm) 0.45 Type Natural rubber sheathed cable
- MIGHT INDUSTRY Grounded cap tireConductor Cross Section Area (mm2) 22 RoHS directive (corresponding to 10 substances) Correspondence Suitable for For inverter DC welding machine
- MIGHT INDUSTRY Cap tire with holderConductor Cross Section Area (mm2) 22 RoHS directive (corresponding to 10 substances) Correspondence Suitable for For inverter DC welding machine
- TRUSCO Cabtire cable secondary side wire (with ground clip and round terminal)Because it uses elastic and tough natural rubber, it is resistant to impact and wear, and has excellent withstand voltage characteristics. Secondary cable for arc welders (for grounding).Cable Length (m) 10
- TRUSCO Captyre cable secondary side wire holder with round terminalBecause it uses elastic and tough natural rubber, it is resistant to impact and wear, and has excellent withstand voltage characteristics. Secondary cable (welding side) of the arc welder.Cable Length (m) 10
- TRUSCO Connection cable for welding machine Secondary sideSince this cable uses elastic and tough natural rubber, it exerts sufficient strength against impact and wear, and especially has excellent withstand voltage characteristics. Mainly as a cable for connecting the secondary side of an arc welder. * Be sure to check the applicable current of the arc... Read MoreMaterial (Conductor) Copper wire Material (film) Natural rubber for conductors
- MITSUBOSHI Cab Tire Cable For Welding Holder Cable WRCTSince it uses a super-flexible conductor and uses elastic natural rubber for the sheath, it is highly flexible, and the insulator and sheath are double-coated to improve safety. This cable is used on the secondary side of the welding machine. It can be divided into a lead wire cable used for exte... Read More
- FUJI ELECTRIC WIRE INDUSTRIES Super soft welding cable SS-WCTMuch! Softness 200% (compared to manufacturer WCT) We provide outstanding softness. Uses highly flexible cross-linked PE with excellent heat resistance / durability. It also has excellent oil resistance / weather resistance / wear resistance / flame retardancy / spatter resistance. Since the allo... Read MoreHeat Resistance Temperature (℃) 90 RoHS directive (corresponding to 10 substances) Correspondence
- Sanritsu Electric Industry Lark codeRevolutionary !! Special holder wire with less fatigue Reduces fatigue during welding work and helps improve efficiency !! Compared to conventional captire cables, Lark cords are extremely flexible due to the multiple layers of thousands of extra-fine (0.12 mm) strands. Therefore, it has a long l... Read More
- Fuji Electric Wire (Shikoku) Cabtire cable for welding holder wireSince natural rubber is used for the insulator and sheath, it has excellent flexibility and cold resistance. The super-flexible conductor with flexibility is adopted. It is inferior in weather resistance, flame resistance, and oil resistance. The conductor is made flexible by a triple structure o... Read More
- MITSUBOSHI Economy Welding Cable E / WCTA high-performance type welding cable that uses flame-resistant cross-linked polyethylene as an insulating material. Flame retardant: Excellent spatter resistance and does not spread even when brought close to flame. Durability: It has excellent weather resistance and heat resistance, does not ge... Read MoreRoHS directive (corresponding to 10 substances) Correspondencefrom ₱4,518.73Min. 2 days
- TRUSCO Cabtire cable secondary cable (with joints on both ends)Because it uses elastic and tough natural rubber, it is resistant to impact and friction, and has excellent withstand voltage characteristics. Since it has joints on both ends, it can be extended according to the usage conditions. Extension cable for holder and ground clip with arc welder joint.from ₱6,985.74Min. 2 days
- Sakai Dengyo Cabtire cable with cable joint on the welder sideThe dimensions are W displayed on both sides of the wire by repeating 1m to 10m.Length (m) 0.3 Standard length (m) 200 Type Natural rubber sheathed cable Terminal Terminal R22-10
- TRUSCO Cabtire cable secondary side wire (with ground clip and round terminal)Because it uses elastic and tough natural rubber, it is resistant to impact and wear, and has excellent withstand voltage characteristics. As a secondary cable (for grounding) of an arc welderCable Length (m) 5from ₱8,219.24Min. 2 days
- FUJI ELECTRIC WIRE INDUSTRIES Welding cable F RonSince it uses flame-retardant cross-linked polyethylene with greatly improved flexibility, it has a long heat-resistant life. Therefore, compared to the conventional WCT, a large allowable current can be obtained, which makes it possible to reduce the size, making it lighter and easier to use. It... Read MoreRoHS directive (corresponding to 10 substances) Correspondencefrom ₱7,396.90Min. 2 days
- Sakai Dengyo Cabtyre cable with cable jointThe dimensions are W displayed on both sides of the wire by repeating 1m to 10m.Standard length (m) 200 Type Natural rubber sheathed cablefrom ₱8,219.24Min. 2 days
- TRUSCO Welding Machine Connection Cable Primary SideSince this cable uses elastic and tough natural rubber, it exerts sufficient strength against impact and wear, and especially has excellent withstand voltage characteristics. It is mainly used for the primary side cable of arc welders. * Be sure to check the applicable current of the arc welder a... Read More
- TRUSCO Cabtire cable secondary side (with holder and round terminal)Because it uses elastic and tough natural rubber, it is resistant to impact and wear, and has excellent withstand voltage characteristics. As a secondary cable (welding side) of an arc welderCable Length (m) 5from ₱8,219.24Min. 2 days
- MITSUBOSHI Economy Welding Cable E / WRCTA high-performance type welding cable that uses flame-resistant cross-linked polyethylene as an insulating material. Flame retardant: Has excellent spatter resistance and does not spread even when brought close to flame. Durability: It has excellent weather resistance and heat resistance, does no... Read MoreInsulation Thickness (mm) 0.8 RoHS directive (corresponding to 10 substances) Correspondence
- NICHIDO IND Welder adapter 300AWelding machine of 300A or less * Do not use with a welding machine of 300A or more.Welding Current (A) 100~300 Trusco Part No. 814-7561
- Sakai Dengyo Cabtire cable with ground clipThe dimensions are W displayed on both sides of the wire by repeating 1m to 10m.Standard length (m) 200 Clip EB300 Type Natural rubber sheathed cablefrom ₱12,330.91Min. 2 days
- Sakai Dengyo Cabtire cable with welding rod holderThe dimensions are W displayed on both sides of the wire by repeating 1m to 10m.Standard length (m) 200 Holder Mitsuru S300 (Screw) Type Natural rubber sheathed cablefrom ₱11,919.75Min. 2 days
- TRUSCO Cabtire cable secondary cable (with ground clip and cable joint)Since this cable uses elastic and tough natural rubber, it exhibits sufficient strength against impact and wear, and has excellent withstand voltage characteristics in particular. It is used as a secondary cable for arc welders.from ₱9,452.74Min. 2 days
- TRUSCO Welding machine connection cable (primary side)Since this cable uses elastic and tough natural rubber, it exerts sufficient strength against impact and wear, and in particular, it has excellent withstand voltage characteristics. Mainly the primary side cable of the arc welder.Rated Input (kVA) (Welding machine) 17.6 Current Range (A) 71 Electric wire used 1CT2C×14.0mm2 Input Rating (kW) (Welding machine) 10.5 Suitable Current (A) 71from ₱13,564.42Min. 2 days
- TRUSCO Easy cabtire cable secondary side wire (with holder and cable joint)It uses a super flexible twisted conductor and uses elastic natural rubber for the sheath, making it ideal for holders. Double coating of insulator and sheath enhances safety. Secondary cable (welding side) of the arc welder.Cable Length (m) 2.5from ₱9,452.74Min. 2 days
- MIGHT INDUSTRY Captire cable with groundConductor nominal cross-sectional area (mm2) 38 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱6,574.57Min. 4 days
- TRUSCO Cabtire cable secondary cable (with holder and cable joint)Since this cable uses elastic and tough natural rubber, it exhibits sufficient strength against impact and wear, and has excellent withstand voltage characteristics in particular. It is used as a secondary cable for arc welders.
- FUJI ELECTRIC WIRE INDUSTRIES Cab tire WRCTThis cable has a flexible conductor with a triple structure of thin strands (collective twist x concentric twist x concentric twist), and is covered with natural rubber insulation and a natural rubber sheath in two layers. It has excellent flexibility and safety. Natural rubber insulation natural... Read MoreInsulation Thickness (mm) 1.0 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱7,808.07Min. 12 days
- STAR ELECTRIC MANUFACTURING (SUZUKID) Cab tire with earth clip SEC-300 / M type 38sq with plug 22Sq × 5mfrom ₱5,752.23Min. 3 days
- MIGHT INDUSTRY 22mm cabtyre cutting 5mConductor nominal cross-sectional area (mm2) 22 Length (m) 5 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱2,795.53Min. 4 days
- MIGHT INDUSTRY 5.5mm 3-core input cableLength (m) 1 Number of Cores (C) 3 Conductor nominal cross-sectional area (mm2) 5.5 RoHS directive (corresponding to 10 substances) Correspondencefrom ₱657.46Min. 4 days
- Sakai Dengyo Cab tire cable for welding holder wire WRCTSakai Denki's welding cables are marked with W on both sides of the wire by repeating 1m to 10m, so it is very easy to see and the dimension display remains on both ends even after cutting. It can be used very conveniently for cutting with.Wire Diameter (mm) 0.16 Insulation Thickness (mm) 0.8 Color Blackfrom ₱9,452.74Min. 5 days
- STAR ELECTRIC MANUFACTURING (SUZUKID) Cab tire SEH-300A / M type with 38sq plug 22Sq × 5mfrom ₱5,752.23Min. 3 days