Gas Regulators
A gas regulator is a device that is attached to an industrial gas container filled with high-pressure gas and adjusts the filling gas to a pressure suitable for operations such as gas cutting, welding, and heating. For example, in equipment using welding acetylene, an acetylene gas container and an oxygen gas container are prepared, and an acetylene regulator and an oxygen regulator are attached respectively. Then, the structure is such that each gas regulator adjusts the pressure to an appropriate level and supplies the air-fuel mixture to the blowpipe. There are two types of oxygen regulators: the Kanto style (cap nut style) and the Kansai style (thumb screw style).
Other Related Pages
Yamato Sangyo General-purpose compact pressure regulatorPlease select according to the oxygen container. (It may vary depending on the region.) The mounting part of the regulator to be mounted on the oxygen container is different.Pressure Range, Secondary Side (MPa) 0.2～0.99 Mass (kg) 1.2 Low Pressure Gauge (MPa) 2.5 High Pressure Gauge (MPa) 25 Standard Flow Rate (m3/h) 25(P1=2.1MPa、P2=0.8MPa) Trusco Part No. 281-6181 Model / Type Kansai type (bow screw type) Suitable Gas Oxygen Pressure Range, Primary Side (MPa) ～15- Yamato Sangyo Two-stage pressure regulator for analyzers MSR-1S・Because of the two-stage decompression structure, fluctuations in the secondary side pressure are extremely small, and stable supply is possible.・Ideal for gas supply with gas purity of 99.99% (brass) to 99.999% (stainless steel).Secondary pressure (MPa) 0.05~0.99 Mass (kg) 1.9 Primary Pressure (MPa) 2~20 Standard Flow Rate (L/min) 56 (P1=15MPa, P2=0.6MPa N2 value) Maximum Flow Rate (L/min) 70 (P1=15MPa, P2=0.6MPa N2 value) Material SUS316from ₱53,410.66Min. 19 days
- Yamato Sangyo YR-200 Carbonated No Heater Adjuster (with fin)・A regulator with built-in radiation fins to prevent the valve from freezing due to gas (carbon dioxide gas, etc.) whose temperature drops when the pressure is reduced. * Frost adheres to the outside during use. Avoid using at ambient temperatures below 5°C. *Liquid cannot be taken out from siph... Read MoreMass (kg) 1.8 Trusco Part No. 851-3313 Material A5056Bfrom ₱19,731.93Min. 2 days
- Yamato Sangyo Line pressure regulator for analyzerA regulator for the end of centralized gas piping. Easy to use with upper IN-lower OUT. For analyzers, for researchMass (kg) 1 Standard Flow Rate (L/min) 100 (hydrogen / helium: 200) Connector Diameter Rc1/4
-
- Yamato Sangyo General-purpose compact pressure regulator YR-90 (with valve)It is a small regulator that can stably supply gas because there is little pressure fluctuation. Comes with an outlet valve. (Rc1 / 4) For analysis / research, industrial useMass (kg) 1.4 Material (Main Unit) Brass
- SAKAGUCHI Built-in acetylene regulator and backfire prevention deviceIt is compact and lightweight, and the acetylene frame mounting part uses a free slide type that prevents poor adhesion. A stopper is built into the pressure adjustment handle to prevent excessive pressure increase on the secondary side, and the structure is also excellent in safety! * The fire m... Read MoreSecondary pressure (MPa) 0.01～0.1 Operating Pressure Range (MPa) 0.02~0.09 Low Pressure Gauge (MPa) 0.2 Mass (kg) 2 Dimensions (Width W x Height H) (mm) 275×260 Standard flow rate 2NM3/h Suitable Gas Acetylene Specification Flashback prevention Primary Pressure (MPa) ～1.55
- SAKAGUCHI Oxygen regulator (Kanto type)Compact and lightweight, the inlet side container connection part adopts a free slide type that prevents poor adhesion. A stopper is built into the pressure adjustment handle to prevent excessive pressure increase on the secondary side, and the structure is also excellent in safety!Secondary pressure (MPa) 0.1～0.99 Operating Pressure Range (MPa) 0.2~0.99 Mass (kg) 1.5 Dimensions (Width W x Height H) (mm) 185×165 Standard flow rate 25NM3/h Suitable Gas Oxygen Primary Pressure (MPa) ～15
- SAKAGUCHI Nitrogen Regulator* Kanto type valve. If you want to attach the R-10 to a Kansai type (female screw) cylinder, you need to purchase a conversion nipple (order code: 9382441) with on-screw on both sides separately. * Low pressure pressure gauge (MPa) 2.5 is the display on the board.Range of Use 0.2～0.99 Mass (kg) 1.4 Low Pressure Gauge (MPa) 2.5 High Pressure Gauge (MPa) 25 Standard Flow Rate (m3/h) 25 Suitable for N2 Suitable Type of Gas nitrogen
- SAKAGUCHI Carbon Dioxide Regulator (Naturally Vaporizing No Heater Type)When the carbon dioxide gas is decompressed, the temperature drops and the gas pressure control valve does not operate. To prevent this, the regulator with fins makes it possible to supply a stable gas using atmospheric heat energy. is. Since it is a natural vaporization type, unlike the forced v... Read MoreLow Pressure Gauge (MPa) 0.6 Mass (kg) 2.7 Standard Flow Rate (L/min) 25 Suitable for CO2 Suitable Gas carbon dioxide gas Operating Pressure Range (MPa) ～0.3
- SAKAGUCHI Acetylene adjusterOperating Pressure Range (MPa) 0.02～0.09 Low Pressure Gauge (MPa) 0.2 Mass (kg) 1.8 Standard Flow Rate (m3/h) 2 High Pressure Gauge (MPa) 2.5 Suitable Gas Acetylene
- SAKAGUCHI Built-in oxygen regulator and backfire prevention device (Kanto type)Operating Pressure Range (MPa) 0.2~0.99 Mass (kg) 1.7 Low Pressure Gauge (MPa) 2.5 High Pressure Gauge (MPa) 25 Standard Flow Rate (m3/h) 25
- SAKAGUCHI Oxygen Regulator (KANSAI Type)Compact and lightweight, the inlet side container connection part adopts a free slide type that prevents poor adhesion. A stopper is built into the pressure adjustment handle to prevent excessive pressure increase on the secondary side, and the structure is also excellent in safety!Secondary pressure (MPa) 0.1～0.99 Mass (kg) 1.5 Dimensions (Width W x Height H) (mm) 185×155 Standard flow rate 25NM3/h Suitable Gas Oxygen Primary Pressure (MPa) ～15
- Yamato Sangyo General-Purpose Compact Pressure Regulator YR-90F (With Flow Meter)It is a small regulator that can stably supply gas because there is little pressure fluctuation. Comes with an outlet float type flow meter (25L). For analysis / research, industrial useOperating Temperature Range (℃) -10～40 Secondary pressure (MPa) 0.2～0.37 Mass (kg) 1.6 Primary Pressure (MPa) 2～15
- SAKAGUCHI Propane regulatorOperating Pressure Range (MPa) 0.02～0.09 Low Pressure Gauge (MPa) 0.2 Mass (kg) 1.3 High Pressure Gauge (MPa) 2.5 Standard Flow Rate (m3/h) 6 Suitable for LPG Suitable Gas Propane
- Yamato Sangyo General-Purpose Compact Pressure RegulatorFor testing plant equipment. Please send according to the working pressure.Pressure Range, Secondary Side (MPa) 0.2～0.99 Mass (kg) 1.3 Secondary Pressure Gauge (MPa) 1.6 Trusco Part No. 126-7647 Primary Pressure Gauge (MPa) 25 Pressure Range, Primary Side (MPa) 2～14.7 Standard Flow Rate (m3/h) 45 Maximum Flow Rate (m3/h) 55 Material (Main Unit) C3771B Material (Diaphragm) CR Suitable for N2 Material (Valve Member) PCTFE Specification With valve Suitable Gas nitrogen
- SAKAGUCHI Oxygen Regulator Flashback Protection Device (KANSAI Type)Operating Pressure Range (MPa) 0.2~0.99 Mass (kg) 1.6 Low Pressure Gauge (MPa) 2.5 Standard Flow Rate (m3/h) 25 High Pressure Gauge (MPa) 25 Function Flashback prevention Standard Kansai style
- SAKAGUCHI Carbon dioxide gas regulator (with built-in heater)Built-in power heater that prevents the valve from malfunctioning as the temperature drops when the pressure is reduced. A structure with a built-in stopper in the pressure adjustment handle for excellent safety in order to prevent excessive pressure increase on the secondary side! * This adjuste... Read MoreOperating Pressure Range (MPa) 0.1~0.3 Low Pressure Gauge (MPa) 0.6 Power Supply 100V/190W Dimensions (Width W x Height H) (mm) 170×180 Mass (kg) 2.3 Standard flow rate 25NL/min Suitable for CO2 Suitable Gas carbon dioxide gas Secondary pressure (MPa) ～0.5
- Yamato Sangyo Argon regulator・Adjuster for argon.・Since it is a pressure setting type, it can be used at the same time as opening the cylinder valve.・The built-in high-precision diaphragm type safety valve ensures safety against abnormal pressure rise on the secondary side.Trusco Part No. 126-7604 Pressure Range, Primary Side (MPa) 2～15 Suitable Gas argon Suitable for Ar Maximum Flow Rate (L/min) 25 Pressure Range, Secondary Side (MPa) 0.4±0.1 Mass (kg) 1.0 Primary Pressure Gauge (MPa) 25
- Yamato Sangyo Two-stage pressure regulator for analyzerDue to the two-stage decompression structure, fluctuations in the secondary side pressure are extremely small, and stable gas supply is possible. Ideal for gas supply with gas purity of 99.99% (brass) to 99.999% (stainless steel).Secondary pressure (MPa) 0.02～0.26 Standard Flow Rate (m3/h) 24 (P1 = 15MPa, P2 = 0.6MPa, N2 value) Mass (kg) 1.9 Primary Pressure (MPa) 2～15 Maximum Flow Rate (m3/h) 30 (P1 = 15MPa, P2 = 0.6MPa, N2 value) Material C3604B
- Yamato Sangyo Line Pressure Regulator For AnalyzerA regulator for the end of centralized gas piping. It is small and has good performance. For analyzers, for researchMass (kg) 1 Standard Flow Rate (L/min) 100 (hydrogen / helium: 200) Connector Diameter Rc1/4from ₱11,097.41Min. 2 days
- SAKAGUCHI LP Industrial RegulatorDespite its small size and light weight, it can stably supply a sufficient flow rate for various tasks.Operating Pressure Range (MPa) 0.02~0.09 Low Pressure Gauge (MPa) 0.2 Mass (kg) 1.2 Standard Flow Rate (Nm3/h) 6 Suitable for LPG Suitable Gas Propane
- KOIKE SANSO KOGYO Acetylene adjusterIt is a new type adjuster for acetylene that can be quickly attached to and detached from the container for quick maintenance after use. In addition, by adopting a taper lead mechanism, tightening can be securely fixed even with a light force. Since the joint between the mounting frame (gut) and ... Read MoreOperating Ambient Temperature (℃) -10～+40 Working Pressure Range (MPa [kgf/cm2]) 0.01～0.1(0.1～1) Secondary Side Maximum Pressure, MPa (kgf/cm2) 0.2(2) Standard Flow Rate (Nm3/h) 2 (at secondary pressure 0.05 MPa) Primary Side Maximum Pressure, MPa (kgf/cm2) 2.5(25) Mass (g) Body: 1200, Gut (frame): 480 Specification Dry type safety device integrated type Type Flashback prevention
- KOIKE SANSO KOGYO Oxygen regulator safety gold Tejime-kunFor containersMaximum Operating Pressure (MPa) 0.98 Supply Air Pressure (MPa) 14.7(150kgf/cm2) Standard Flow Rate (Nm3/h) 32 at 0.8 MPa RoHS directive (corresponding to 10 substances) Correspondence Function Flashback prevention Suitable Gas Oxygen Pressure gauge (MPa) Primary: 25, Secondary: 2.5
-
- Yamato Sangyo SS Boy Ultra (for oxygen)It is a regulator with a built-in dry cutout (automatic backflow / flashback prevention device) in the conventional gauge guarded regulator, and the size and durability are designed in the same way as the conventional product.Pressure Range, Secondary Side (MPa) 0.2～0.99 Mass (kg) 1.7 Low Pressure Gauge (MPa) 2.5 High Pressure Gauge (MPa) 25 Standard Flow Rate (m3/h) 25(P1=2.1MPa、P2=0.8MPa) Frame Fitting Dimensions for Acetylene Gas Connection, Depth x Width (mm) 65×55 Function Flashback prevention Suitable Gas Oxygen Pressure Range, Primary Side (MPa) ～15from ₱12,330.91Min. 2 days
- Yamato Sangyo General-purpose compact pressure regulatorPlease select according to the oxygen container. (It may vary depending on the region.) The mounting part of the regulator to be mounted on the oxygen container is different.Pressure Range, Secondary Side (MPa) 0.2～0.99 Mass (kg) 1.2 Low Pressure Gauge (MPa) 2.5 High Pressure Gauge (MPa) 25 Standard Flow Rate (m3/h) 25(P1=2.1MPa、P2=0.8MPa) Trusco Part No. 281-6172 Model / Type Kanto type (cap nut type) Suitable Gas Oxygen Pressure Range, Primary Side (MPa) ～15
- Yamato Sangyo High pressure regulator YR-5061H・A high-pressure regulator that can be used for high-pressure filling, airtightness, pressure resistance testing, etc. *Rubber hoses cannot be used due to the high pressure on the secondary side.Secondary pressure (MPa) 1～8 Primary Pressure (MPa) 4～15 Maximum Operating Pressure (MPa) 8 Material (Main Unit) Brass Fluid Nitrogen, airfrom ₱28,777.61Min. 2 days
- azbil (Yamatake Corporation) Pressure regulatorPressure regulator Pressure Troll L404F is a pressure regulator used for pressure control, limit control, alarm, etc. of non-corrosive liquids, gases, vapors, etc. The bellows of the pressure receiving part detects the pressure change and activates the switch to turn the electric circuit on and o... Read MoreType of Operation (Control) ON / OFF Mass (g) About 900from ₱15,209.09Min. 2 days
- CHIYODA SEIKI Oxygen regulator stout (standard)A compact body with few protrusions. Comes with a gauge protector. It is a new JIS standard compliant product. Oxygen gas regulator.Mass (kg) 1.3 Suitable Gas Oxygenfrom ₱7,808.07Min. 2 days
- Yamato Sangyo SS Boy Ultra (for acetylene)It is a regulator with a built-in dry cutout (automatic backflow / flashback prevention device) in the conventional gauge guarded regulator, and the size and durability are designed in the same way as the conventional product.Pressure Range, Secondary Side (MPa) 0.02～0.12 Low Pressure Gauge (MPa) 0.2 Mass (kg) 2 Standard Flow Rate (m3/h) 2(P1=0.4MPa、P2=0.05MPa) High Pressure Gauge (MPa) 2.5 Trusco Part No. 281-6105 Frame Fitting Dimensions for Acetylene Gas Connection, Depth x Width (mm) 66×55 Suitable Gas Acetylene Specification Flashback prevention Pressure Range, Primary Side (MPa) ～1.55
- Yamato Sangyo Oxygen Regulator SS Junior・It has a compact design and a pressure gauge cover.・Compliant with the new JIS.・The secondary pressure is designed so that it cannot be raised above a predetermined pressure.・The taper seal method (NPT1/4) is used for the pressure gauge mounting thread.・Furthermore, the thickness of the reg... Read MoreMass (kg) 1.1 Low Pressure Gauge (MPa) 2.5 High Pressure Gauge (MPa) 25 Suitable Gas Oxygen
- SAKAGUCHI Helium RegulatorRange of Use 0.2～0.99 Mass (kg) 1.4 Low Pressure Gauge (MPa) 2.5 High Pressure Gauge (MPa) 25 Standard Flow Rate (m3/h) 25 stem diameter (mm) 8 Suitable for He Suitable Type of Gas helium
- Yamato Sangyo Pressure regulator for argon with dual flow meter YR-85F2・Since it is a pressure setting type, it can be used at the same time as opening the cylinder valve.・The built-in high-precision diaphragm type safety valve ensures safety against abnormal pressure rise on the secondary side.Trusco Part No. 434-6785 Material (Main Unit) Brass Suitable Gas argonfrom ₱16,031.42Min. 2 days
- Yamato Sangyo Pressure regulator for helium YR-70V・It is a highly versatile adjuster. for container mountingMass (kg) 1.3 Operating Temperature Range (℃) -10～40 Primary Pressure (MPa) 2～15 Suitable Gas helium Material Brass Suitable for He Secondary pressure (MPa) 0.2～0.99 Trusco Part No. 434-6777
- CHIYODA SEIKI Pressure regulator with heaterIt is a compact and heat-efficient structure. Comes with a thermo patch that shows the temperature rise at a glance. (50 ° C display) Arc welding, beverages, food industry, casting industry, plant cultivation promotion, general industry, etc. * Cannot be used for siphon cylinders.Maximum Flow Rate (L/min) 25 Mass (kg) 2.06 Flow Meter (L/min) 2～25 Adjusted Pressure (MPa) 0.1～0.3 Cable Length (m) 2.0 Suitable for CO2 Primary Pressure (MPa) 14.7 or less AC Power Input (V) 100 Primary Pressure Gauge (MPa) 0～25 Secondary Pressure Gauge (MPa) 0～0.6 Heater Capacity (W) 190 Suitable Gas Mainly carbon dioxidefrom ₱17,676.09Min. 2 days
- YUTAKA Non-variable pressure regulator with argon gas flow meterDaihen welding machine specificationsAdjusted Pressure (MPa) 0.25 Design pressure (MPa) 0.25 Mass (kg) 1.6 Inlet Pressure (MPa) 14.8 or less High Pressure Gauge (MPa) 25 total Suitable for Ar Included Accessories Cylinder packing (fiber) x 2 Flow rate OUT type Suitable Gas argon
-
-
-
