Welding Torches & Tips
Other Related Pages
- TASCO Short size welderIdeal for working in tight spaces. Ideal for brazing copper pipes. For acetylene sansoNozzle ♯100、♯200、♯315
- NISSAN TANAKA For medium size cutter U45Ⅱ Novac acetyleneSuitable Gas Acetylenefrom ₱8,219.24Min. 2 days
- ESCO 83.5mm L type sao (with # 140 crater)Replacement Sao for EA300M-4, M, MBMass (g) 38 Overall Length (mm) 83.5 Material Brass Esco Part No. EA300M-1from ₱3,946.80Min. 6 days
- MonotaRO Tip Nozzle for Medium-size Cutting TorchA crater for medium-sized cutting machines. For acetylene and oxygen. * Do not use for anything other than its intended purpose.Suitable Gas Acetylene, oxygen Mounting Screw W13.5×24 threads
- NISSAN TANAKA Medium Cutting Torch NozzleSuitable Gas Acetylene RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Type A cutting craterFor cutting work in all fields. * Do not use for anything other than its intended purpose.Mass (g) 120 Overall Length (mm) 92 Suitable Blowpipe A type cutter Suitable Gas Acetylene Mounting Screw W16 × 20 mountain
- MonotaRO Medium size cutter* Do not use for anything other than its intended purpose.Overall Length (mm) 397 Suitable Gas Acetylene Set Contents Crater number (M1, M2, M3) Range of Pipe Diameter to Cut M1:1~5mm M2:5~15mm M3:15~30mm
- NISSAN TANAKA Type A Cutting Torch Nozzle TipSuitable Gas Acetylene RoHS directive (corresponding to 10 substances) Correspondence Suitable for Tanaka type A cutting blowpipe
- CHIYODA SEIKI Medium size cutter craterAll products have been ignited and shipped, so quality is stable and long-lasting, and cutting accuracy is maintained. It is a new JIS standard compliant product. For cutting thin to thick plates with acetylene.Suitable for 12MT Mass (g) 65 Suitable Gas Acetylene Type Medium
- Yamato Sangyo Torch NozzleMass (g) 70 Suitable for Medium size cutter (for acetylene)
- SAKAGUCHI Small welderFor easy welding of thin plates up to 5 mmWelding Capacity (mm) 0.5~3 Overall Length (mm) 325 Included Accessories 5 (1 each for No. 50, 70, 100, 140, 200) Mass (g) 520 Suitable Gas Acetylene
- KOIKE SANSO KOGYO Nakakiri C2H2 craterValue the grip of " Perfect " in your hand. It features a safety structure in which each gas conduit is independent. The ease of use fits, and it demonstrates easy cutting without getting tired even in the field work. Fuel gas is standardized not only for LP gas but also for acetylene... Read MoreGas Pressure (MPa) (LPG)0.02 Oxygen Pressure (MPa) 0.3 Suitable Gas Acetylene
- SAKAGUCHI Type A cutterFor cutting work in all fields.Included Accessories Crater 1, 2, 3
- NISSAN TANAKA Medium Cutting Torch Z NovakIt has a safer structure while inheriting the conventional performance. The internal pipe of the grip is made into two independent pipes for oxygen and fuel gas to improve safety and strength. The valve knob has been made thicker to improve operability. The uneven shape of the grip makes it easie... Read MoreOverall Length (mm) 433 Mass (g) Blowing tube / 645
- CHIYODA SEIKI Medium size cutter (acetylene cutter)Japanese Industrial Standard JIS B 6802 applicable productOverall Length (mm) 460 Name of Gas Acetylene Mass (g) Blowing pipe: 640 / crater: 65 Specification For acetylene Nozzle No.1・No.2・No.3 Cutting Thickness (mm) No.1:3~7
No.2:5~15
No.3:10~20 Nozzle Diameter (mm) No.1:Φ0.7
No.2:Φ0.9
No.3:Φ1.1 Gas Pressure (MPa) Oxygen: 0.25 / acetylene: 0.03 Included Accessories Tinder: 3 - CHIYODA SEIKI Type A cutter (acetylene cutter)Japanese Industrial Standard JIS B 6802 applicable productOverall Length (mm) 535 Suitable Blowpipe A-cut, Glitter A, New Glitter A cutter Name of Gas Acetylene Mass (g) Blowing pipe: 850 / crater: 125 Specification For acetylene Nozzle No.1・No.2・No.3 Cutting Thickness (mm) No.1:5~15
No.2:10~25
No.3:20~50 Nozzle Diameter (mm) No.1:Φ1.0
No.2:Φ1.3
No.3:Φ1.6 Gas Pressure (MPa) Oxygen: 0.4 / acetylene: 0.04 Included Accessories Tinder: 3 - KOIKE SANSO KOGYO Nakakiri Gold Light II* The crater is sold separately.Overall Length (mm) 395 Mass (g) 610 Suitable Gas Acetylene JIS Standard JIS type 1 No. 1 equivalent Nozzle Middle cut Operating Pressure (MPa) Oxygen: 0.3 Acetylene: 0.02
- SAKAGUCHI Medium size cutting device crater (propane)Suitable Gas Propane
- KOIKE SANSO KOGYO Cutting-kunConvenient for carrying to the factory site and cutting gas. Installation work on oxygen and acetylene cylinders is manual tightening and no tools are required. All connections are tool-free and easy one-touch connection. The regulator is equipped with a flashback prevention device to ensure safe... Read MoreRoHS directive (corresponding to 10 substances) Correspondence
- CHIYODA SEIKI Type A cutter craterAll items are shipped after ignition test, so the quality is stable and long-lasting, and the cutting accuracy is maintained. New JIS standard compliant product. For cutting thin to thick plates with acetylene.Mass (g) 125 Suitable for 14LT Suitable Gas Acetylene Type Type Afrom ₱1,068.62Min. 2 days
- SAKAGUCHI Medium welderExcellent ability for medium plate thickness weldingWelding Capacity (mm) 1~8 Overall Length (mm) 375 Mass (g) 530 Suitable Gas Acetylene
- SAKAGUCHI Type A cutting crater (acetylene)Suitable Gas Acetylene Gas Pressure (MPa) Oxygen / 0.3, acetylene / 0.03 Dimension (mm) Screw: W16-20from ₱657.46Min. 2 days
- NISSAN TANAKA Welding Nozzle Tip 6220Welding heating craterNozzle total length (mm) 35 Suitable Gas Acetylene Part No. Small melt acetylene crater Suitable Blowpipe Small welder N, M Mounting Screw W7.5-28from ₱534.11Min. 2 days
- CHIYODA SEIKI Wide range welder crater for acetyleneSuitable Gas Acetylene
- NISSAN TANAKA Manual Cutting Torch NozzleA crater for medium-sized propane cutters.RoHS directive (corresponding to 10 substances) Correspondence Suitable Gas Propanefrom ₱945.27Min. 2 days
- KOIKE SANSO KOGYO Automatic Cutting Torch NozzlePressure (kg/cm2 ) 0.2 Suitable Gas Acetylene RoHS directive (corresponding to 10 substances) Correspondence
- SAKAGUCHI 00 welderFor brazing welding of ultra-thin platesWelding Capacity (mm) 0.1~1 Overall Length (mm) 280 Mass (g) 350 Included Accessories 4 (No. 10, 16, 25, 40 each 1) Suitable Gas Acetylene
- NISSAN TANAKA Crater 1520LGouging craterNozzle total length (mm) 111 Part No. A-cut gouging acetylene crater Suitable Gas Acetylene Suitable Blowpipe No. A cutting machine Z Novak Mounting Screw W16-20from ₱9,863.91Min. 2 days
- KOIKE SANSO KOGYO A off C2H2 craterValue the "perfect" grip in your hand. It features a safety structure in which each gas conduit is independent. The ease of use fits, and it demonstrates easy cutting without getting tired even in the field work. Fuel gas is standardized not only for LP gas but also for acetylene. Even ... Read Morefrom ₱1,233.09Min. 2 days
- Yamato Sangyo Medium size cutter (AC) with craterAdopting a structure that reduces flashback, it reduces accidents caused by flashback. It is a new JIS compliant product. Ideal for factory and field work. For cutting steel materials * Securely tighten the crater with a spanner.Suitable for (Crater) M1A, M2A, M3A Cutting Capacity (mm) 1~30 Overall Length (mm) 465.5 Trusco Part No. 820-2721 Set Contents Compatible craters: 3 Type Platingfrom ₱9,452.74Min. 2 days
- CHIYODA SEIKI Small welder (acetylene welder)Japanese Industrial Standard JIS B 6801 applicable productOverall Length (mm) 380 Suitable Gas Acetylene Mass (g) Blowing tube: 480 / crater: 25 Nozzle No.50・No.70・No.100・No.140・No.200 Gas Pressure (MPa) Oxygen: 0.2 / acetylene: 0.02 Included Accessories Tinder: 5from ₱11,097.41Min. 2 days
- ESCO Φ0.5-1.4mm Welding crater cleaning needle (8 pcs)It can be used for cleaning various craters due to its abundant sizes. * Dirt on the crater impairs the passage of gas and is extremely dangerous. Clean the crater after each use to prevent flashback.Esco Part No. EA300BZ Material Stainless steelfrom ₱616.34Min. 2 days
- NISSAN TANAKA Cutting Device Torch Nozzle (For LPG)A standard model of the tip for manual cutters using LPG. (Foundation) Certified by the Japan Welding Society. For cutting steel sheets using LPG.
- Yamato Sangyo Large No. A cutter (AC)Adopting a structure that reduces flashback, it reduces accidents caused by flashback. It is a new JIS compliant product. Ideal for factory and field work. For cutting steel materials * Securely tighten the crater with a spanner.Cutting Capacity (mm) 1~100 Overall Length (mm) 517 Trusco Part No. 828-9251 Included Accessories Compatible craters: 3 Type Plating Suitable for Tinder / A1A, A2A, A3Afrom ₱12,330.91Min. 2 days