Welding Guide Rulers
TECHNOPLAN Guide scaleSince it uses heat-resistant cooperative permanent magnets, it can be expected to improve workability with a firm holding force. It is a special tool for fusing by moving while keeping the height of the crater constant in gas welding.Width (mm) 83 Length (mm) 46- NISSAN TANAKA Simple cutting guide (for cutting and cutting)Applicable Pipes (Blow-pipe) small and medium size cutterfrom ₱4,929.90Min. 2 days
- NISSAN TANAKA Simple cutting guide (for cutting A and B)A cutting guide that allows you to use your own cutting device as it is. The structure does not require electricity, so there is no need to worry about breakdowns. For simple straight or arc cutting. * Medium-sized cutting device and No. A cutting device are not included.Applicable Pipes (Blowpipe) A-B cutting machinefrom ₱5,752.23Min. 2 days
- Shinwa Rules Welding guide rulerInsulation coating is applied to the surface of the ruler. Since it is difficult to energize, it is difficult to spark even if the welding machine touches it. The main body is made of aluminum and is light and easy to handle. The angle can be changed freely, the angle is easy to match, and the sl... Read MoreMain Unit Dimensions (mm) 1010 x 550 x 54 (at 90 °) Right Angle Accuracy ± 1 / 1000rad (± 1.0mm at 1000mm) Operating Temperature Range (℃) -20～70from ₱13,975.58Min. 2 days
- NISSAN TANAKA KT-270 with 726mm railA cutting guide that allows you to use your own cutting device as it is. Since a constant speed can be obtained, cutting can be performed with the same accuracy as automatic cutting. Groove cutting can be done in the same way. The structure that does not require electricity does not need to worry... Read MoreType KT-270 Offset Angle (°) (Bevel cutting) 0-45 Trusco Part No. 306-1493 Effective Length (mm) (Guide rail) 636 Mass (kg) 2 Length (mm) (Guide rail) 726 Cutting Speed (mm/min) 300～700from ₱39,056.80Min. 2 days
- KANETEC Guide scaleHigh-performance permanent magnets firmly fix the scale. The GS-1 can adjust the scale up and down according to the height of the crater. The GS-2 can be easily attached and detached because the suction force can be turned ON / OFF by operating the lever. A dedicated guide device for moving while... Read Morefrom ₱12,330.91Min. 2 days
- ASADA Tip 60A CUT Master 52/82/102Current (A) 60 Suitable Model CUT Master 52, 82, 102from ₱4,929.90Min. 5 days
- Shinwa Rules Parts Welding guide rulerspecial parts * Do not use for any other purpose.from ₱242.18Min. 5 days
-
- ASADA Tip 40A For SL40Current (A) 40 Suitable Model CUT Master 42 (for non-contact use)from ₱3,288.93Min. 5 days
- ASADA Tip 40A SL40 for contactCurrent (A) 40 Suitable Model CUT Master 42from ₱3,288.93Min. 5 days
- ASADA Chip 80A for CUT Master 82/102Suitable Model CUT Master 82, 102 Current (A) 80from ₱4,518.73Min. 5 days
- ASADA Tip 20A SL40 for contactCurrent (A) 20 Suitable Model CUT Master 42from ₱3,288.93Min. 5 days
- ASADA For gas distributor CUT MasterSuitable Model CUT Master 38, 39, 52, 82, 102from ₱5,341.07Min. 5 days
- SAKAGUCHI Circular and straight-line induction wheelMinimum Cutting Radius (mm) 65 Overall Length (mm) 550 maximum cutting radius (mm) 500 Mass (g) 620Discontinued
- ASADA Gas distributor for 35P ・ PCCutting guide (PZ960) Standard accessory For torch operation without blurring !! For accurate cutting of straight lines and perfect circles. Can also be used for stainless steel plates.Suitable Model 35P・PC Trusco Part No. 851-2949Discontinued
- ASADA Chip 35P / PCCutting guide (PZ960) Standard accessory For torch operation without blurring !! For accurate cutting of straight lines and perfect circles. Can also be used for stainless steel plates.Suitable Model 35P・PCDiscontinued
-
- KOIKE SANSO KOGYO Large circle cutting compass (Φ120 ~ Φ500)Size Φ120～Φ500 Suitable for Handy Auto IIDiscontinued
- ASADA Chip for 15PC ECOCutting guide (PZ902) Standard accessory For torch operation without blurring !! For accurate cutting of straight lines and perfect circles. Can also be used for stainless steel plates.Suitable Model 15PC ECODiscontinued
- ASADA Gas Distributor 15 PC For ECOCutting guide (PZ902) Standard accessory For torch operation without blurring !! For accurate cutting of straight lines and perfect circles. Can also be used for stainless steel plates.Suitable Model 15PC ECODiscontinued
-
- KOIKE SANSO KOGYO Small circle cutting compass (Φ30 ~ Φ200)Suitable for Handy Auto II Size Φ30～Φ200Discontinued
- ASADA Tip 30A For CUT masterCurrent (A) 30 Suitable Model CUT Master 38, 39, 52, 82, 102Discontinued
