Flux-filled wire for MAG welding used for hard overlay welding. A slag type flux-cored wire with excellent arc stability and extremely small amount of spatter. The slag is naturally peeled off, making it easy to remove the slag.
Specification Shield gas: CO Wire Type With flux JIS Standard Z3326 YF3B-C-600
Flux-filled wire for MAG welding used for hard overlay welding. A slag type flux-cored wire with excellent arc stability and extremely small amount of spatter. The slag is naturally peeled off, making it easy to remove the slag.
Specification Shield gas: CO Wire Type With flux JIS Standard Z3326 YF3B-C-800
Machining is possible with high speed. Can be hardened after processing.
For parts that are subject to metal-to-metal wear and slight earth and sand wear.
Machining is difficult. If possible, perform heat treatment after welding at about 600 ° C.
Overlay welding of cutter knives, casings, etc., sediment wear.
RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326
YF2A-C-250
It is a high-chromium cast iron type that produces a large amount of chromium carbide in the weld metal and is ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent wear resistance even in corrosion and high temperature atmospheres.
Overlay w... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
A welding material for 13Mn steel, the weld metal has an austenite structure and is highly work-hardening. Welded metal has high toughness, low hardness as it is welded, and the surface hardens to high hardness when it receives a strong impact from the outside.
Overlay welding of crusher, bucket ... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
It is a welded metal component of 16Cr-16Mn, has an austenite structure, and is rich in toughness and work hardening. Compared to solid wire, the arc stability is very good, there is less spatter, and the slag is evenly applied, resulting in a beautiful bead. Since the weld metal has excellent st... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YFME-C-250
Co-Cr-W alloy, so-called stellite, which has high hardness. It is inferior in wear resistance to MT-STL-1, but has excellent toughness.
Overlay of parts that require corrosion resistance, heat resistance, and wear resistance, such as high-pressure pump shaft sleeves, textile industry cutter cutti... Read More
Wire Rope Diameter (Φmm) 1.6 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Welded metal of about HV570 can be obtained as it is welded. The weld metal is 13Cr martensitic steel, which has excellent wear resistance as well as corrosion resistance and oxidation resistance. Workability is good, and a beautiful bead with no defects can be obtained.
Overlay welding of rolls,... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 250～350 Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF4B-C-600
A flux-cored wire for submerged arc welding that obtains a weld metal of 13Cr-4Ni-1Mo. The weld metal is a structure containing fine austenite in martensite, and has excellent toughness and crack resistance compared to conventional 13Cr steel. Welded metal has excellent mechanical properties and ... Read More
Operating Voltage Range (V) 26～30 Wire Rope Diameter (Φmm) 3.2 Current Range (A) 300～450 Speed 30～60cm/min RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
It is a tungsten carbide system and produces tungsten carbide in the weld metal, making it ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent wear resistance even in corrosion and high temperature atmospheres.
Overlay of blowers, sandblast... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 300～350 Suitable Gas Ar 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
It is a high-chromium cast iron system that produces a large amount of chromium carbide in the weld metal and at the same time produces composite carbides of Mo, W, Nb, V, etc., making it ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent ... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 230～300 Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Flux-cored wire for submerged arc welding with good arc stability and beautiful beads. This wire is particularly excellent in heat check resistance, hardness, and toughness, and is suitable for overlaying parts that are subject to intermetal wear and repeated thermal stress at high temperatures. ... Read More
Operating Voltage Range (V) 26～30 Wire Rope Diameter (Φmm) 3.2 Current Range (A) 300～450 Speed 30～60cm/min RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Welded metal of about HV530 can be obtained as it is welded. The weld metal is 13Cr martensitic steel, which has excellent wear resistance as well as corrosion resistance and oxidation resistance. Workability is good, and a beautiful bead with no defects can be obtained.
Overlay welding of rolls,... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 250～350 Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF4B-C-500
It is a high-chromium cast iron type that produces a large amount of chromium carbide in the weld metal and is ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent wear resistance even in corrosion and high temperature atmospheres.
Overlay w... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
A flux-cored wire for MIG welding designed so that the weld metal component is 13Cr-4Ni by performing one-layer overlay welding on carbon steel. Since it is a flux-cored wire, the arc is stable, there is almost no spatter, the slag is easily peeled off, and the bead appearance is very beautiful. ... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 250～350 Suitable Gas Ar 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Welded metal with a high hardness of about HV700 can be obtained as it is welded. The arc stability is very good, there is little spatter, and a smooth and beautiful bead is obtained. It is not easily affected by wind, and good welding results can be obtained even outdoors.
Overlay welding of rol... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF3B-C-700
It is a high-chromium cast iron type that produces chromium carbide in the weld metal, making it ideal for erosion wear. Welded metal exhibits excellent wear resistance, as well as excellent corrosion resistance and heat resistance.
Overlay of Exostar, Sandblast, Pump Casing, Impeller, Mixer Blad... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YFCrA-C-700
Welded metal of about HV350 can be obtained as it is welded. The arc stability is very good compared to solid wire, there is less spatter, and the slag is evenly applied, resulting in a beautiful bead. It is not easily affected by wind, and good welding results can be obtained even outdoors.
Over... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence JIS Standard JIS Z3326 YF2A-C-350 Wire Type With flux
Flux-cored wire for submerged arc welding with good arc stability and beautiful beads. The structure of the weld metal is a mixed structure of sorbite and martensite, which is particularly excellent in heat check resistance.
Overlay welding of various rolls and rollers and parts that are subject ... Read More
Operating Voltage Range (V) 26～30 Wire Rope Diameter (Φmm) 3.2 Current Range (A) 300～450 Speed 30～60cm/min RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Welded metal of about HV780 can be obtained as it is welded. Although the weld metal lacks toughness, it exhibits excellent wear resistance against those that are subject to severe earth and sand wear.
Overlay welding of pump casings, impellers, buckets, screw conveyors, exoticers, blowers, etc.
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF3B-C-800
Parts that require corrosion resistance and heat resistance, such as high temperature valves, forging molds, rollers, blowers, etc.
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 280～320 Suitable Gas Ar20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type Solid
It is a high-chromium cast iron system that produces a large amount of chromium carbide in the weld metal and at the same time produces composite carbides of Mo, W, Nb, and V, making it ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent we... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 230～300 Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YFCrA-C-800
Welded metal of about HV300 can be obtained as it is welded. The arc stability is very good compared to solid wire, there is less spatter, and the slag is evenly applied, resulting in a beautiful bead. It is not easily affected by wind, and good welding results can be obtained even outdoors.
Over... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF2A-C-300
It is a Co-Cr-W alloy and is the most representative alloy among so-called stellite alloys. It has high toughness in hot and cold and is widely used.
Overlay of parts that require corrosion resistance, heat resistance, and wear resistance, such as high-temperature and high-pressure valve seats, c... Read More
Wire Rope Diameter (Φmm) 1.6 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Welded metal of about HV250 can be obtained as it is welded. The arc stability is very good compared to solid wire, there is less spatter, and the slag is evenly applied, resulting in a beautiful bead. It is not easily affected by wind, and good welding results can be obtained even outdoors.
Over... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF2A-C-250
A flux-cored wire for MIG welding with a weld metal component of 13Cr-4Ni. Since it is a flux-cored wire, the arc is stable, there is almost no spatter, the slag is easily peeled off, and the bead appearance is very beautiful. Welded metal with excellent crack resistance, good workability such as... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 250～350 Suitable Gas Ar 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF4A-G-400
It is a flux-cored wire for submerged welding, and welded metal of about HV570 can be obtained as it is welded. The weld metal is 13Cr martensitic steel, which exhibits excellent wear resistance and also has excellent corrosion resistance, heat resistance, and oxidation resistance.
Overlay weldin... Read More
Operating Voltage Range (V) 26～30 Wire Rope Diameter (Φmm) 3.2 Current Range (A) 300～450 Speed 30～60cm/min RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Welded metal of about HV450 can be obtained as it is welded. The arc stability is much better than solid wire, resulting in smooth and beautiful beads. It is not easily affected by wind, and good welding results can be obtained even outdoors.
Overlay welding of rollers, shafts, wheels, idlers, sh... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF2A-C-450
A flux-cored wire for MIG welding that obtains the weld metal component of 13Cr-4Ni-1Mo. Since it is a flux-cored wire, the arc is stable, there is almost no spatter, the slag is easily peeled off, and the bead appearance is very beautiful. In addition, good welds can be obtained, such as low blo... Read More
Suitable Gas Ar 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Flux-cored wire for submerged arc welding with good arc stability and beautiful beads. This wire is particularly heat-check resistant and is suitable for overlaying parts that are subject to intermetal wear and repeated thermal stresses at high temperatures. It is especially suitable for underlay... Read More
Operating Voltage Range (V) 26～30 Wire Rope Diameter (Φmm) 3.2 Current Range (A) 300～450 Speed 30～60cm/min RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Welded metal with excellent crack resistance can be obtained as it is welded, despite its high hardness of about HV600. The arc stability is very good, there is little spatter, and a smooth and beautiful bead is obtained. It is not easily affected by wind, and good welding results can be obtained... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF3B-C-600
It is a high-chromium cast iron type that produces a large amount of chromium carbide in the weld metal and is ideal for erosion and sediment wear. Welded metal exhibits excellent wear resistance, and also has excellent wear resistance even in corrosion and high temperature atmospheres.
Overlay w... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
A flux-cored wire for CO2 welding that obtains the weld metal component of 13Cr-4Ni-1Mo. Since it is a flux-cored wire, the arc is stable and there is little spatter, the slag is easily peeled off, and the bead appearance is very beautiful. In addition, good welds can be obtained, such as low blo... Read More
Suitable Gas CO2 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF4A-C-400
A flux-cored wire for MIG welding with a weld metal component of 13Cr-2Ni-1Mo. Since it is a flux-cored wire, the arc is stable, there is almost no spatter, the slag is easily peeled off, and the bead appearance is very beautiful. Welded metal with excellent crack resistance, good workability suc... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 250～350 Suitable Gas Ar 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF4A-G-400
A flux-cored wire for MIG welding that obtains the weld metal component of 13Cr-2Ni-1Mo. Since it is a flux-cored wire, the arc is stable, there is little spatter, the slag is easily peeled off, and the bead appearance is very beautiful. The weld metal is a structure containing a small amount of ... Read More
Wire Rope Diameter (Φmm) 1.6 Current Range (A) 200～320 Suitable Gas Ar 20～25(L/min) RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3326 YF4A-G-450
Co-Cr-Mo based wear resistant welding material. Welded metal has excellent wear resistance, heat resistance, corrosion resistance, and oxidation resistance, and is suitable for overlaying parts that are subject to corrosion at high temperatures accompanied by impact and wear between metals. It sh... Read More
Wire Rope Diameter (Φmm) 1.6 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Kobelco (Kobe Steel) Flux-cored wire for hardfacingFlux-filled wire for MAG welding used for hard overlay welding. A slag type flux-cored wire with excellent arc stability and extremely small amount of spatter. The slag is naturally peeled off, making it easy to remove the slag.Specification Shield gas: CO Wire Type With flux JIS Standard Z3326 YF3B-C-600from ₱19,731.93Min. 14 days
