Since the austenite structure contains an appropriate amount of ferrite, it has low cracking sensitivity and excellent weldability. Welded metal with excellent corrosion resistance and mechanical properties can be obtained as it is welded. It has welding workability suitable for welding downward ... Read More
Yield Strength (N/mm2) 390 (0.2%, one example) Adsorption 39J / energy (example) Elongation (%) 41 Tensile Strength (N/mm2) 570 AWS Standard A5.22、E308T0-1、E308T0-4 Performance certification Classification: NK (CO 2 ) Wire Type With flux JIS Standard Z3323、TS308-FB0
A flux-cored wire for CO 2 welding that provides a welded metal of 19Cr-9Ni with extremely low carbon. Compared to solid wire, the welding condition range is wider, the arc is very stable, there is almost no spatter, no blow holes are generated, and a beautiful glossy bead appearance is obtained,... Read More
AWS Standard A5.22 E308LT0-1 Wire Type With flux JIS Standard Z3323 TS308L-FB0
Taseto GFW308L is used for welding SUS304 and SUS304L. Due to its low carbon content, it has excellent intergranular corrosion resistance even when welded, and is used in places where solution heat treatment is not possible.
AWS Standard E308LT0-1 applicable JIS Standard TS308L-FB0 Wire Type With flux
308 series stainless steel flux-cored wire that can obtain 20% Cr-10% Ni-based weld metal. Since the weld metal contains an appropriate amount of ferrite, it has good crack resistance and a sound weld metal can be obtained. In addition, since the carbon content of the weld metal is low, it has re... Read More
Taseto GFW309L is used for the first layer welding of low carbon stainless clad steel and the first layer welding of low carbon stainless steel overlay welding. Also, like GFW309, it is used for dissimilar welding of stainless steel and carbon steel or low alloy steel.
AWS Standard E309LT0-1 applicable JIS Standard TS309L-FB0 Wire Type With flux
Elongation (%) 48.3 Tensile Strength (MPa) 581 RoHS directive (corresponding to 10 substances) Correspondence AWS Standard ER308 Suitable for SUS304 JIS Standard YS308
Taseto GFW309 is used for dissimilar welding of stainless steel with carbon steel or low alloy steel, first layer welding of stainless clad steel and overlay welding of stainless steel.
AWS Standard E309T0-1 applicable JIS Standard TS309-FB0 Wire Type With flux
Content 1 roll (5kg) RoHS directive (corresponding to 10 substances) Correspondence AWS Standard ER308 Type For Stainless steel Suitable Model MDM-200 Wire Type Solid JIS Standard Z3321 YS308 equivalent
A seamless flux-cored wire that produces less spatter, easily peels off slag, and provides a good bead appearance and bead shape. In particular, since there are no seams, it has excellent moisture absorption resistance and good wire feeding performance can be obtained. In addition, high-efficienc... Read More
It can be welded from a low current of 100A and is excellent for fillet welding with small legs. It can also be welded to ultra-thin plates of 1.5 mm, which was difficult with a wire diameter of 1.2 mmΦ. It has excellent re-arcability, and there is no need to remove the wire tip when restarting t... Read More
Wire Rope Diameter (Φmm) 1.2 Elongation (%) 38 0.2% yield strength (MPa) 400 Absorption Energy (J) 45 Tensile Strength (MPa) 600 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Wire Rope Diameter (Φmm) 0.8 Content 1 roll (5kg) RoHS directive (corresponding to 10 substances) Correspondence Suitable Model MDM-200 Wire Type Solid Type Stainless steel
Low carbon austenitic stainless steel flux-cored wire, available in general-purpose type with excellent slag peeling and white bead type WHITE type. Due to its low carbon content, the weld metal has excellent intergranular corrosion resistance even when it is still welded. Therefore, it is suitab... Read More
0.2% yield strength (MPa) 384 (example) Elongation (%) 42 (example) Tensile Strength (MPa) 561 (example) AWS Standard A5.22 E308LT0-1/4 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3323 TS308L-FB0
Low-carbon austenitic stainless steel Flux-filled wire, available in general-purpose type with excellent slag peeling and white bead WHITE type. Similar to WEL FCW 309T, it is used for welding SUS 309S, 13Cr steel, 18Cr steel, and dissimilar material welding between stainless steel and carbon ste... Read More
Elongation (%) 37 (example) 0.2% yield strength (MPa) 434 (example) Tensile Strength (MPa) 541 (example) AWS Standard A5.22 E309LT0-1/4 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3323 TS309L-FB0
Austenitic stainless steel Flux-filled wire, available in general-purpose type with excellent slag peeling and white bead type WHITE type. Due to its low carbon content, the weld metal has excellent intergranular corrosion resistance even when it is still welded. Therefore, it is suitable for wel... Read More
Elongation (%) 40 (example) 0.2% yield strength (MPa) 420 (one example) Tensile Strength (MPa) 538 (example) AWS Standard A5.22 E316LT0-1/4 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3323 TS316L-FB0
A gas shielded arc welding wire that can weld stainless steel with high efficiency and has good welding workability. The welding speed is much higher (2-4 times) than that of shielded metal arc welding rods, and it is extremely efficient. In addition, it is an economical welding material with a h... Read More
Yield Strength (N/mm2) 0.2%:450(46kgf/mm2) Wire Rope Diameter (Φmm) 1.2 Elongation (%) 32 Maximum Absorbing Energy (J [kgfm]) 33[3.4] Tensile Strength (N/mm2) 590(60kgf/mm2) AWS Standard A5.22 E309T0-1, E309T0-4 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Taseto GFW316L is used for welding SUS316 and SUS316L. Due to its low carbon content, it has excellent intergranular corrosion resistance even when welded, and is used in places where solution heat treatment is not possible.
AWS Standard E316LT0-1 applicable JIS Standard TS316L-FB0 Wire Type With flux
The arc is stable at low current, the heat effect on the stainless steel plate is suppressed, and there is little spatter, making it ideal for thin plates. Conforms to mixed gas (Ar / 95% + O2 / 5%) standards. The welds have the same coefficient of expansion.
Elongation (%) 36 Yield point (MPa) 450 Tensile Strength (MPa) 620 Ingredient Cr、Ni、C、Mn、Mo、Si Wire Type Solid
Taseto GFW309MoL has the same characteristics as GFW309Mo, but the carbon content is reduced to 0.04% or less, so it is used for the first layer welding of SUS316L clad steel and 316L overlay metal. Will be done.
Wire Rope Diameter (Φmm) 1.2 AWS Standard E309LMoT0-1 JIS Standard TS309LMo-FB0 Wire Type With flux
Taseto Stainless Steel Fluxed Wire "X" Series is a wire aimed at improving the efficiency of welding with a plate thickness of 5 mm or less. Compared to conventional wires, the welding speed in the low current range is high and the re-arcability is excellent, so the efficiency of interm... Read More
Wire Rope Diameter (Φmm) 1.2 Welding Current (A) 150 AWS Standard E308LT-G JIS Standard TS308L-FC0 Wire Type With flux
A flux-cored wire for CO2 welding from which a weld metal of 19Cr-9Ni can be obtained. Compared to solid wire, the welding condition range is wider, the arc is very stable, there is almost no spatter, there is no blow hole, and a beautiful glossy bead appearance can be obtained, showing excellent... Read More
Wire Rope Diameter (Φmm) 1.2 Current Range (A) 100~220 AWS Standard A5.22 E308T0-1 Suitable Gas CO2 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux JIS Standard Z3323 TS308L-FB0
The weld metal has a Vickers hardness of about 450 as it is welded. Compared to solid wire for CO 2 welding, the arc is extremely stable, there is less spatter, and the slag is evenly covered, resulting in a good bead appearance and a smooth bead shape.
Overlay welding of rolls, truck rollers, ca... Read More
RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Austenitic stainless steel Flux-filled wire, available in general-purpose type with excellent slag peeling and white bead WHITE type, used for welding SUS309S, 13Cr steel, etc. Due to the high content of Cr and Ni, the weld metal can obtain an austenite structure containing an appropriate amount ... Read More
Wire Rope Diameter (Φmm) 1.2 Welding Current (A) 180~200 Elongation (%) 35 Tensile Strength (MPa) 562 RoHS directive (corresponding to 10 substances) Correspondence Wire Type With flux
Taseto GFW310E is used for welding AISI310, SUS310S and welding dissimilar metals. Excellent corrosion resistance and heat resistance due to high chromium and high nickel.
* Use 100% CO 2 for the shield gas. Since it has a completely austenite structure and is highly susceptible to high temperatu... Read More
Wire Rope Diameter (Φmm) 1.2 AWS Standard E310T0-1 applicable JIS Standard TS310-FC0 Wire Type With flux
A seamless flux-cored wire that produces less spatter, easily peels off slag, and provides a good bead appearance and bead shape. In particular, since there are no seams, it has excellent moisture absorption resistance and good wire feeding performance can be obtained. In addition, high-efficienc... Read More
Wire Rope Diameter (Φmm) 1.2 AWS Standard A5.22 E316L TO-1 applicable Gas Type CO2 and Ar + 20% CO2 Wire Type With flux JIS Standard Z3323 TS316L-FBO