Welding Supplies
Welding supplies are necessary for welding metal etc. by machining. Mainly arc welding and spot welding are used when processing sheet metal and hardware in fields such as the construction industry and the automobile industry. Welding machines and welding materials such as welding rods and melting wires are required for welding. When using a semi-automatic welding machine, the filler metal is automatically sent, so it is possible to weld continuously. Choose the filler metal according to the base material such as for stainless steel, titanium, aluminum, or mild steel. Arc light contains ultraviolet rays and infrared rays, so the eyes and skin are protected with a welded surface and light-shielding glasses that are strong against impact and bright.
Other Related Pages
- MonotaRO Spatter sheetThere is no problem of dust and pollution. Welding spark curing sheet, fireproof sheet, flameproof covers * Do not use for anything other than its intended purpose.Instantaneous Operating Temperature (℃) 1300 Continuous Use Temperature (℃) 250 Thickness (mm) About 1.0 Eyelet Inner Diameter (mm) Φ12
- MonotaRO Welding Rod HolderWelding rod holder used for arc welding. You can easily clip the welding rod. * Be sure to perform maintenance and inspection before use. * Because it is an imported product, there may be some paint peeling or scratches, but there is no problem in using it.Welding Current (A) 200 Compatible cable (mm2) 22~38 Suitable Welding Rod (mm) 2~5 Wire Connection Screw
- MonotaRO Torch nozzle cleaning needlesA crater cleaning needle that is convenient to carry. The cleaning needle can be stored in the main body case. * Do not use for anything other than its intended purpose.
- Shosekido [Profesional] Core-Resistant Paint Marker MediumColor coding such as steel grade is possible. Since it is an opaque oil-based pigment ink, it develops vivid colors even on dark colors. Has excellent light resistance. Has excellent water resistance. It is resistant to changes in the wind and rain and the thermal environment, and is suitable for... Read MoreLength (mm) 142 Line Width (mm) 2 Type Ink oil pigment
- Shosekido Strong core tough paintAn oil-based marker that can be written on wet areas. Strong core that is hard to crush! Strong in sunlight! Does not flow in water! Can be written on rough asphalt! Can be written on any material without damaging it! Since it is non-xylene, it does not damage or melt the marked parts. (This make... Read MoreLength (mm) 145 Diameter (Φmm) 15 Line Width (mm) 2 Type Oil-based
- Fuji Electric Wire (Shikoku) Cabtire cable for weldingSince natural rubber is used for the sheath, it has excellent flexibility and cold resistance. It is inferior in weather resistance, flame resistance, and oil resistance. The most popular type of annealed copper assembly stranded wire wrapped with insulating tape and covered with natural rubber I... Read MoreAct on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) Correspondence
- TRUSCO Welding GaugeMade of stainless steel and resistant to rust. Robust, light and convenient to carry (with hanging case). It is absolutely necessary to speed up welding work and rationalize quality control. Supports all welding measurements such as general welding, construction, shipbuilding, and bridges.
- FUJI ELECTRIC WIRE INDUSTRIES Cabtire Tire WCTThe most popular type with insulating tape wrapped around annealed copper assembly stranded wire and covered with natural rubber. Natural rubber sheath cable for lead wiresRoHS directive (corresponding to 10 substances) Correspondence
- Kobelco (Kobe Steel) Welding rod for mild steel to 550 MPa class steelA lime titanian welding rod with good welding workability, X-ray performance and mechanical properties. It has excellent workability in all postures and contains a large amount of iron powder in the coating material, so the welding speed is fast, the re-arcability is good, and the work efficiency... Read MoreAdsorption 120J / energy (example) Elongation (%) 32 (example) Yield Point (N/mm2) 410 (example) Tensile Strength (N/mm2) 460 (example) Color Bar end color: White Remark Classification: NK, AB, LR, NV, BV RoHS directive (corresponding to 10 substances) Correspondence JIS Standard Z3211、D4303
- Shoei Shokai For SK gouging carbon DCGouging rods are used for welding back chipping, groove removal, defect chipping of welds, etc. for steel frames, bridges, shipbuilding, can manufacturing, etc., and for cutting hot water and sprue parts of castings, nest chipping, etc. It may be. This is a carbon electrode rod used in the arc ai... Read MoreType General purpose Overall Length (mm) 355
- Panasonic Smart Factory Solutions CO2 taperless R tipSince the wire inlet is small, it prevents foreign matter from entering the inside of the chip and reduces wire welding. Inheriting the highly durable material and high precision machining of the popular R tip. It has excellent durability and is effective in reducing chocolate stops and improving... Read Morefrom ₱1,109.74Min. 2 days
- LA-CO Markal super heat resistant marker paint stickMarking is possible on workpieces in extremely high temperatures. It is resistant to discoloration and deterioration and maintains clear markings for a long period of time. For very hot steel etc.Material Pigment Ink Color White Color White
- TRUSCO Covering surface for welding Sweat padA sweat pad for the cover surface for welding.Trusco Part No. 415-3146 Mass (g) 12 Type Covering surface for welding Suitable Model TSM20S/TSM25S4
- TRUSCO Water resistant marking chalkWorks well on particularly wet materials such as steel, glass and PVC pipes. Can be wiped clean with a wet cloth. For writing on water resistant blackboards and green boards for construction. For marking metal plates and building materials during construction. * Cannot be written over oil.Mass (g) 19 Material Synthetic wax, surfactant, pigment Dimension (mm) Φ15×100from ₱534.11Min. 2 days
- TRUSCO Magnewelder for weldingSuitable for stable holding by combining joints when welding iron plates, round pipes, and iron balls. For temporary holding and temporary assembly work during welding work.Dimension (mm) 102×162×16 Attracting Force (N) 147 Trusco Part No. 232-7074 Holding angle (°) 45、90 Mass (g) 560 Specification Ferrite magnet Material SS400
- TASCO Short size welderIdeal for working in tight spaces. Ideal for brazing copper pipes. For acetylene sansoNozzle ♯100、♯200、♯315
- Yamato Sangyo General-purpose compact pressure regulatorPlease select according to the oxygen container. (It may vary depending on the region.) The mounting part of the regulator to be mounted on the oxygen container is different.Pressure Range, Secondary Side (MPa) 0.2~0.99 Mass (kg) 1.2 Low Pressure Gauge (MPa) 2.5 High Pressure Gauge (MPa) 25 Standard Flow Rate (m3/h) 25(P1=2.1MPa、P2=0.8MPa) Trusco Part No. 281-6181 Model / Type Kansai type (bow screw type) Suitable Gas Oxygen Pressure Range, Primary Side (MPa) ~15
- Style Index (PRINCE) Wide-mouth nozzle for GT5000 / 8000Attachment for GT-5000 only. Attachment for GT-5000 / 8000. Paint peeling, sheet metal processing, wood era finishing, PVC pipe processing, paint peeling, PVC pipe processing, sheet metal processingFlame Temperature (℃) 1800 Heating Capacity (kcal/h) 3838 Trusco Part No. 834-5542 Mass (g) 70 Width (mm) 85 Suitable Model GT-5000、GT-8000 Length (mm) 55.0 Height (mm) 23.8
- KOKEN Sakaki type disaster prevention surface 35 type greenThis type is used when working near a dazzling light source. It is used to protect the face from flying objects, powder droplets, and chemical / solvent droplets. * Cannot be used for a protective cap with a wide brim. Since it is not a JIS standard product, we have not tested the degree of shading.Mass (g) About 210 Dimension (mm) About 265 × 205 Material Acrylic RoHS directive (corresponding to 10 substances) Correspondence Type Helmet mounting typefrom ₱1,973.19Min. 2 days
- NIKKO YOZAI MFG Shielded metal arc welding rod (for hardened overlay) BK-700BKR-700 is a high titanium oxide welding rod that emphasizes stable hardness and workability. Since it is a high-hardness martensitic welding rod containing C, Cr, and Mo, it exhibits excellent performance against severe earth and sand wear. In addition, it is difficult to machine with the build-... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Color Rod end / yellow JIS Standard Z3251 DF3C-700-B Insulation basic
- HIGASHIYAMA Stone roller art penLet's go out with a pen! You can draw a picture immediately after picking up a stone in the river! For stones, wood, glass, etc.! Easy to use because it is a marker! You don't have to wash it like paint, so you can use it anytime, anywhere! With water-based pigment ink, you don't have... Read MoreSize (mm) Φ13×140from ₱196.95Min. 3 days
- Yamato Sangyo Two-stage pressure regulator for analyzers MSR-1S・Because of the two-stage decompression structure, fluctuations in the secondary side pressure are extremely small, and stable supply is possible.・Ideal for gas supply with gas purity of 99.99% (brass) to 99.999% (stainless steel).Secondary pressure (MPa) 0.05~0.99 Mass (kg) 1.9 Primary Pressure (MPa) 2~20 Standard Flow Rate (L/min) 56 (P1=15MPa, P2=0.6MPa N2 value) Maximum Flow Rate (L/min) 70 (P1=15MPa, P2=0.6MPa N2 value) Material SUS316from ₱53,410.66Min. 19 days
- STAR ELECTRIC MANUFACTURING (SUZUKID) Gas gauge direct socketGas fitting plug. One-touch hose joint gauge direct connection gas valve. Attach to the acetylene regulator. It is the female side. For gas welding and cutting.from ₱1,973.19Min. 2 days
- Riken Chemical Disaster prevention 350-MDimension (mm) 215×250×2 Mass (g) 225 Material (Lens) Acrylic Type Cylindrical type Lens Color Green (G2)from ₱1,890.96Min. 8 days
- NISSAN TANAKA For medium size cutter U45Ⅱ Novac acetyleneSuitable Gas Acetylene Nozzle Nonefrom ₱8,219.24Min. 2 days
- Yamato Sangyo YR-200 Carbonated No Heater Adjuster (with fin)・A regulator with built-in radiation fins to prevent the valve from freezing due to gas (carbon dioxide gas, etc.) whose temperature drops when the pressure is reduced. * Frost adheres to the outside during use. Avoid using at ambient temperatures below 5°C. *Liquid cannot be taken out from siph... Read MoreMass (kg) 1.8 Trusco Part No. 851-3313 Material A5056Bfrom ₱19,731.93Min. 2 days
- UVEX Shading Goggles Ultrasonic Flip UpA flip-up type that can block light only when needed. A gray lens with excellent color recognition performance. With a soft frame, you won't get tired even if you use it for a long time. You can work safely with a wide field of view. High quality and durable anti-fog and anti-scratch coating ... Read More2018 Trusco page 7 0361 Lens Color Gray Type Shading gogglesfrom ₱6,163.40Min. 3 days
- Shinwa Rules Steel accuracy measuring instrument 7 piece setThe 7 gauges, which are indispensable for steel frame accuracy inspection, are put together in one sturdy storage case, making it convenient to carry. For quality control of major steel materials that involve welding work. * Depending on the delivery location, the delivery date may be postponed a... Read Morefrom ₱39,056.80Min. 5 days
- ESCO 83.5mm L type sao (with # 140 crater)Replacement Sao for EA300M-4, M, MBMass (g) 38 Overall Length (mm) 83.5 Material Brass Esco Part No. EA300M-1from ₱3,946.80Min. 6 days
- NIKKO YOZAI MFG Welding rodsIron powder is added to the lime titanian coating material to re-arc and improve work efficiency. Especially in the case of fillet welding, the slag has good peelability, a beautiful bead appearance and excellent welding use novi can be obtained, which is unrivaled. In addition, by using a high c... Read MoreElongation (%) 32 Yield Point (N/mm2) 425 Tensile Strength (N/mm2) 466 RoHS directive (corresponding to 10 substances) Correspondence Shock Resistance (Destruction) Impact value: 114J Insulation Lime titania type Coating Lime titania type Color Rod end / Orange JIS Standard Z3211 E4303from ₱10,686.24Min. 5 days
- Shinwa Rules Paint marker for constructionYou can buy paint markers for construction in bulk. Marker used for writing on steel, glass, plastic, etc. * Do not use for any other purpose.Dimension (mm) 144×15×15 Line Width (mm) 2 Material Body: Aluminum, Cap: Polypropylene resin RoHS directive (corresponding to 10 substances) Correspondence Type Medium character Ink Oiliness (pigment) Toe Protection Round corefrom ₱534.11Min. 4 days
- TIME CHEMICAL Tough tip (normal type)Excellent wear resistance and secures an epoch-making long life. Good hole accuracy due to machining. A stable arc can be obtained even with low and high currents. Ideal for contact tips for robots and automatic machines (can also be used for general semi-automatic welding)from ₱2,631.06Min. 5 days
- MIGHT INDUSTRY Muxter for liquid supplyRoHS directive (corresponding to 10 substances) Correspondencefrom ₱6,163.40Min. 4 days