All Category

Epoxy Applicator & Accessories

View : Grid List
Filter

Items 1 - 40 of 46

Set Ascending Direction
  1. Nozzle for 3M metal clip
    3M Nozzle for 3M metal clip
    Mass (g)  2.4  Trusco Part No.  324-1831  Overall Length (mm)  68  Adhesive Materials  Metal  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from ₱2,343.24
    Min. 2 days
  2. Double cartridge gun
    CEMEDINE Double cartridge gun
    A container with a static mixer inserted at the tip of the container is attached to the double cartridge gun, and by pulling the trigger, the two liquids can be quantitatively mixed and discharged.
    Mass (g)  240  Trusco Part No.  364-6254  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    48%
    from ₱2,795.53
    Min. 2 days
  3. Scotch-Weld Long mixing nozzle for 48.5mL
    3M Scotch-Weld Long mixing nozzle for 48.5mL
    Two-component mixed type adhesive applicator, EPX dedicated nozzle.
    Trusco Part No.  125-6630  Overall Length (mm)  147  Mass (g)  Suitable for  DP100CLE48ML、DP125CLE48ML、DP190GRA48ML  Adhesive Materials  Metal, soft PVC  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from ₱3,617.86
    Min. 2 days
  4. LOCTITE Dual cartridge gun for 50mL
    Henkel LOCTITE Dual cartridge gun for 50mL
    A manual applicator that mixes and applies a two-component mixed type adhesive containing a 50 mL cartridge with a static mixer on the hull. It is not necessary to mix because it can be applied in a mixed state by pulling the lever. An applicator that can be easily replaced with a 50mL cartridge.... Read More
    Mass (g)  175  Trusco Part No.  332-6951  Specification  Dot coating / drop coating  Working viscosity range  High viscosity  Type  Manual manual type  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from ₱3,617.86
    Min. 2 days
  5. Static mixer (nozzle)
    CEMEDINE Static mixer (nozzle)
    A container with a static mixer inserted at the tip of the container is attached to the double cartridge gun, and by pulling the trigger, the two liquids can be quantitatively mixed and discharged.
    Discharge Diameter (Φmm)  1.5  Mass (g)  100  Trusco Part No.  364-6262  Type  50g double cartridge mixer  Length (mm)  55.7  Specification  7-stage element  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from ₱3,165.58
    Min. 2 days
  6. Mix Nozzle
    Henkel Mix Nozzle
    Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱1,027.51
    Min. 2 days
  7. Mix nozzle
    Devcon Mix nozzle
    The two liquids can be mixed and discharged with the screw nozzle.
    Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    from ₱2,014.31
    Min. 2 days
  8. Nozzle for Mark 5 gun
    Devcon Nozzle for Mark 5 gun
    Mark 5 gun dedicated (sold separately) nozzle. Devcon 1-Minute Epoxy, 5-Minute Epoxy, 5 Minute Epoxy Dedicated Discharge Nozzle Part No .: 14277, 14270, 14265 Dedicated Nozzle Mark 5 Gun Dedicated Nozzle (Part No .: 217010)
    Mass (g)  40  Overall Length (mm)  80  Code of Suitable Cartridge  DV14265、DV14270、DV14277  Size  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱2,014.31
    Min. 2 days
  9. Mark 5 gun for 50ml cartridge
    Devcon Mark 5 gun for 50ml cartridge
    Two-component adhesive can be easily discharged * A dedicated mix nozzle is required. * Dedicated nozzle part number: 217015 (S size), 217014 (M size), 217013 (L size)
    Height (mm)  160  Mass (g)  255  Length (mm)  400  Width (mm)  60  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱12,330.91
    Min. 2 days
  10. Dedicated mixing gun
    DIPPER Hokumei Dedicated mixing gun
    A special mixing gun is required to construct the best select bar.
    Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    from ₱4,518.73
    Min. 2 days
  11. 30 / 50cc dispenser
    ESCO 30 / 50cc dispenser
    Also used as a 30 to 50 mL cartridge. For EA934WD-50A, (old) EA934WE-50A, EA934DM-10 / 14
    Esco Part No.  EA934WF-50  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱5,752.23
    Min. 2 days
  12. 455-10 syringe gun (for 10ml)
    Henkel 455-10 syringe gun (for 10ml)
    Mass (g)  140  Trusco Part No.  480-1245  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape  Color  Red 
    from ₱2,877.76
    Min. 2 days
  13. Mixing nozzle (for EA934DM-9-14 / 12 nozzles)
    ESCO Mixing nozzle (for EA934DM-9-14 / 12 nozzles)
    Mixing nozzle for EA934DM-10 / 14. Screw nozzle 2 liquids can be mixed and discharged. * Please use EA934WF-50 together. (Sold separately)
    Overall Length (mm)  150  Mass (g)  51.4, 4.3 (per bottle)  Esco Part No.  EA934DM-100  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱2,425.48
    Min. 2 days
  14. Cartridge dispenser H293JPM
    Konishi Cartridge dispenser H293JPM
    Suitable for  (Cartridge) 05373  Mass (kg)  1.4  Height (mm)  190  Length (mm)  360  Trusco Part No.  447-4961  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    from ₱12,330.91
    Min. 2 days
  15. Pegaloc G exclusive gun
    Koatsu Gas Kogyo Pegaloc G exclusive gun
    Gun for exclusive use of Pegalock G (50g cartridge)
    Trusco Part No.  122-6860  Mass (g)  180  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱6,574.57
    Min. 3 days
  16. 3M 2 liquid adhesive gun EPX 200 / 400ml applicator
    3M 3M 2 liquid adhesive gun EPX 200 / 400ml applicator
    A dedicated gun for 3M 2-component mixed adhesive. The Scotch-Weld (TM) EPX (TM) Adhesive System is a system that quantitatively mixes and discharges a two-component mixed adhesive. Eliminates the hassle of mixing two liquids and provides stable adhesiveness. Discharge of adhesive with capacities... Read More
    Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱18,498.43
    Min. 46 days
  17. Extension tube 300.812
    Konishi Extension tube 300.812
    Suitable for  05373  Overall Length (mm)  195  Mass (g)  40  Trusco Part No.  447-4911  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱394.31
    Min. 4 days
  18. Jumbo gun
    Fujitec Jumbo gun
    Gun for jumbo cartridges such as flooring adhesives Gun for jumbo cartridges such as flooring adhesives
    Overall Length (mm)  440  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱534.11
    Min. 4 days
  19. Mixing nozzle
    TILEMENT Mixing nozzle
    A nozzle dedicated to the dual tight system that sufficiently stirs and mixes SGA adhesives.
    Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱35,767.46
    Min. 4 days
  20. Scotch-Weld EPX Adhesive 45mL Mixing Nozzle
    3M Scotch-Weld EPX Adhesive 45mL Mixing Nozzle
    Mixing nozzle for 3M [[TM]] EPX adhesive 45ml. For adhesion between metals, resins, and metals * Since this product is not intended for general consumers, the labeling and instruction manuals are not indicated or included for general consumers.
    Overall Length (mm)  105  Quantity of the Hazardous  3.3g  Trusco Part No.  479-6179  Classification of the Hazardous  Designated combustibles  Adhesive Materials  Metal, PP / PE  Hazardous Class  Other ones  Main Works  Panel frame, parts, 3D shape  Name of The Hazardous  Synthetic resins 
    from ₱9,452.74
    Min. 2 days
  21. Scotch-Weld Scotch Weld Green Mixing Nozzle
    3M Scotch-Weld Scotch Weld Green Mixing Nozzle
    Two-component mixed type adhesive applicator, EPX dedicated nozzle For DP100, DP100PLUS, DP105, DP125, DP190, DP810 * Since this product is not intended for general consumers, the labels and instruction manuals are not indicated or included for general consumers.
    Trusco Part No.  161-5936  Classification of the Hazardous  Non-dangerous goods 
    Rating:
    60%
    from ₱1,849.84
    Min. 2 days
  22. 3M 2 liquid adhesive gun EPX 200ml air applicator
    3M 3M 2 liquid adhesive gun EPX 200ml air applicator
    A dedicated gun for 3M 2-component mixed adhesive. The Scotch-Weld (TM) EPX (TM) Adhesive System is a system that quantitatively mixes and discharges a two-component mixed adhesive. Eliminates the hassle of mixing two liquids and provides stable adhesiveness. Discharge of adhesive with a capacity... Read More
    Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    from ₱152,090.86
    Min. 7 days
  23. Scotch-Weld EPX PLUS2 Applicator
    3M Scotch-Weld EPX PLUS2 Applicator
    Special gun for adhesives. Applicator for 3M (TM) Scotch Weld (TM) two-component adhesive (capacity 45-50ml). A fixed amount of main agent and curing agent in a cartridge are mixed with a dedicated hand gun and a dedicated nozzle, and then discharged. Stable adhesion can be obtained without the t... Read More
    Mass (g)  300  Color  Gray  Classification of the Hazardous  Non-dangerous goods 
    from ₱78,080.71
    Min. 6 days
  24. Helmeresin INJECT 740 exclusive gun
    Hermetic Helmeresin INJECT 740 exclusive gun
    Main Works  Panel frame, parts, 3D shape 
    from ₱16,031.42
    Min. 8 days
  25. Epoxy adhesive nozzle for quick mix
    Henkel Epoxy adhesive nozzle for quick mix
    Replacement nozzle for quick mix only. * Be sure to read how to use Quick Mix before use.
    Trusco Part No.  416-6051  Mass (g) 
    Rating:
    60%
    from ₱205.17
    Min. 3 days
  26. 50mL dedicated gun
    Araldite 50mL dedicated gun
    A dedicated plastic gun that can discharge two-component types at the same time. Adhesion of various metals, plastics, stones, glass, and ceramics exclusively for 50mL. Insulation adhesion and casting of electrical and electronic parts.
    Height H x Length L x Width W (mm)  134×183×55  Mass (g)  290  Trusco Part No.  393-9502  Color  Gray / black  Adhesive Materials  Metal  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    Discontinued
  27. Araldite 50mL Mixer
    Araldite Araldite 50mL Mixer
    Overall Length (mm)  104  Mass (g)  Trusco Part No.  393-9511  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    Discontinued
  28. EPX applicator
    3M EPX applicator
    Trusco Part No.  218-7043  Suitable for  EPX adhesive applicator  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    100%
    Discontinued
  29. Replacement Nozzle for Two-component Rapid Cure Cyanoacrylate adhesive 3092
    Henkel Replacement Nozzle for Two-component Rapid Cure Cyanoacrylate adhesive 3092
    Capacity (g)  10  Mass (g)  26  Trusco Part No.  480-1261  Color  Orange  Main Works  Panel frame, parts, 3D shape 
    Rating:
    80%
    Discontinued
  30. 2000 epoxy nozzle
    Araldite 2000 epoxy nozzle
    There is no need for "weighing and mixing" that is typical of 2-component room temperature curing epoxy adhesives. Zero "blending mistakes" and "mixing mistakes" greatly reduce the problem of poor adhesion. It is possible to mix and fill with "bubble-free",... Read More
    Mass (g)  Overall Length (mm)  160  Trusco Part No.  384-8507  Adhesive Materials  Metal  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape  Color  White 
    Rating:
    80%
    Discontinued
  31. 2000 Epoxy Guns
    Araldite 2000 Epoxy Guns
    A dedicated metal gun that can discharge two-component types at the same time. Corresponds to a mixing ratio of 1: 1 Adhesion of various metals, plastics, stones, glass, and ceramics. Insulation adhesion and casting of electrical and electronic parts. * Cannot be used for 2014-1 and 2014-1-200
    Adhesive Materials  Metal  Main Works  Panel frame, parts, 3D shape  Color  Red / black 
    Discontinued
  32. Mixing nozzle (10)
    ESCO Mixing nozzle (10)
    Mixing nozzle for EA934WD-50A, (old) EA934WE-50A. It can also be used for EA934WB-2.
    Nozzle Length (mm)  About 70  Esco Part No.  EA934WF-1A  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Discontinued
  33. Mixing nozzle MGQ08-24D
    Konishi Mixing nozzle MGQ08-24D
    Mixing nozzle for H293JPM. Adhesive filling of anchors and streaks.
    Suitable for  05373  Mass (g)  110  Overall Length (mm)  162  Trusco Part No.  447-4970  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Rating:
    20%
    Discontinued
  34. 2000 Epoxy Special Air Blow Gun
    Araldite 2000 Epoxy Special Air Blow Gun
    A dedicated gun that is automatically driven by compressed air that can discharge two liquid types at the same time. The discharge speed can be adjusted. Adjustable discharge speed for all compounding ratios Two-component mixed cartridge adhesive Launch gun for Araldite 2000 series. Adhesion of v... Read More
    Mass (kg)  Height (mm)  300  Trusco Part No.  384-8400  Length (mm)  400  Width (mm)  70  Driving System  Automatic drive with compressed air  Color  Gray / black  Adhesive Materials  Metal  Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Discontinued
  35. 3M Weld EPX adhesive dedicated nozzle
    3M 3M Weld EPX adhesive dedicated nozzle
    Overall Length (mm)  147  Trusco Part No.  218-7183  Mass (g) 
    Discontinued
  36. 3M + 2 liquid adhesive dedicated gun + EPX + 400ml + air applicator
    3M 3M + 2 liquid adhesive dedicated gun + EPX + 400ml + air applicator
    A dedicated gun for 3M 2-component mixed adhesive. The Scotch-Weld (TM) EPX (TM) Adhesive System is a system that quantitatively mixes and discharges a two-component mixed adhesive. Eliminates the hassle of mixing two liquids and provides stable adhesiveness. Discharge of adhesive with a capacity... Read More
    Classification of the Hazardous  Non-dangerous goods  Main Works  Panel frame, parts, 3D shape 
    Discontinued
  37. Hot bond
    goot (TAIYO ELECTRIC) Hot bond
    An easy-to-use gun type adhesive. Since 100% solid content that does not contain solvent is heat-treated and adhered, it exhibits strong adhesive strength without harmful molten material odor.
    Mass (g)  100  Dimension (mm)  130×115  Included Accessories  3 adhesive sticks, simple stand  Power Supply  AC100V・50/60Hz・7W  Complete Curing Lime  About 1 to 4 minutes  Bonding time (seconds)  About 10  Classification of the Hazardous  Non-dangerous goods  Heating Element  PTC heater, operating temperature 160 ℃  Main Works  Panel frame, parts, 3D shape 
    Discontinued
  38. [There is a reason] 2000 Epoxy gun
    Araldite [There is a reason] 2000 Epoxy gun
    A dedicated plastic gun that can discharge two-component types at the same time. A dedicated plastic gun that can discharge two-component types at the same time. Compatible with all compounding ratios Adhesion of various metals, plastics, stones, glass, and ceramics. Insulation adhesion and casti... Read More
    Commodity condition  * Reasonable (unused / exterior)  Mass (kg)  Height (mm)  220  Length (mm)  350  Trusco Part No.  384-8493  Width (mm)  70  Color  Gray / black  Classification of the Hazardous  Non-dangerous goods 
    Discontinued
  39. Pegaloc
    Koatsu Gas Kogyo Pegaloc
    -Especially strong adhesion to various metals, ceramics, FRP, etc. -Excellent heat resistance and short fixing time. -Can be adhered even on a slight oil surface, making pretreatment easy. -Handy type that can be used immediately on site. Example of use: Bus fender panels, Kasagi corners, metal d... Read More
    Discontinued
  40. Mark 5 gun
    Devcon Mark 5 gun
    Guns for Devcon PW1, Devcon PW2, 1-Minute Epoxy, 5-Minute Epoxy, 5-Minute Epoxy Gel * If the trigger is heavy, do not pull it forcibly and check if the adhesive is clogged. * Adhesive and nozzle are not included.
    Mass (g)  255  Trusco Part No.  324-2684  Classification of the Hazardous  Non-dangerous goods 
    Rating:
    80%
    Discontinued
View : Grid List
Filter

Items 1 - 40 of 46

Set Ascending Direction