Epoxy Adhesives
Other Related Pages
- 3M Nozzle for 3M metal clipMass (g) 2.4 Trusco Part No. 324-1831 Overall Length (mm) 68 Adhesive Materials Metal Main Works Panel frame, parts, 3D shape
- CEMEDINE Double cartridge gunA container with a static mixer inserted at the tip of the container is attached to the double cartridge gun, and by pulling the trigger, the two liquids can be quantitatively mixed and discharged.Mass (g) 240 Trusco Part No. 364-6254 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shape
- 3M Scotch-Weld Long mixing nozzle for 48.5mLTwo-component mixed type adhesive applicator, EPX dedicated nozzle.Trusco Part No. 125-6630 Overall Length (mm) 147 Mass (g) 4 Suitable for DP100CLE48ML、DP125CLE48ML、DP190GRA48ML Adhesive Materials Metal, soft PVC Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shape
- Henkel LOCTITE Dual cartridge gun for 50mLA manual applicator that mixes and applies a two-component mixed type adhesive containing a 50 mL cartridge with a static mixer on the hull. It is not necessary to mix because it can be applied in a mixed state by pulling the lever. An applicator that can be easily replaced with a 50mL cartridge.... Read MoreMass (g) 175 Trusco Part No. 332-6951 Specification Dot coating / drop coating Working viscosity range High viscosity Type Manual manual type Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shape
- CEMEDINE Static mixer (nozzle)A container with a static mixer inserted at the tip of the container is attached to the double cartridge gun, and by pulling the trigger, the two liquids can be quantitatively mixed and discharged.Discharge Diameter (Φmm) 1.5 Mass (g) 100 Trusco Part No. 364-6262 Type 50g double cartridge mixer Length (mm) 55.7 Specification 7-stage element Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shape
- Henkel Mix NozzleClassification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱1,027.51Min. 2 days
- Devcon Mix nozzleThe two liquids can be mixed and discharged with the screw nozzle.Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shape
- Devcon Nozzle for Mark 5 gunMark 5 gun dedicated (sold separately) nozzle. Devcon 1-Minute Epoxy, 5-Minute Epoxy, 5 Minute Epoxy Dedicated Discharge Nozzle Part No .: 14277, 14270, 14265 Dedicated Nozzle Mark 5 Gun Dedicated Nozzle (Part No .: 217010)Mass (g) 40 Overall Length (mm) 80 Code of Suitable Cartridge DV14265、DV14270、DV14277 Size M Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱2,014.31Min. 2 days
- Devcon Mark 5 gun for 50ml cartridgeTwo-component adhesive can be easily discharged * A dedicated mix nozzle is required. * Dedicated nozzle part number: 217015 (S size), 217014 (M size), 217013 (L size)Height (mm) 160 Mass (g) 255 Length (mm) 400 Width (mm) 60 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱12,330.91Min. 2 days
- DIPPER Hokumei Dedicated mixing gunA special mixing gun is required to construct the best select bar.Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shape
- ESCO 30 / 50cc dispenserAlso used as a 30 to 50 mL cartridge. For EA934WD-50A, (old) EA934WE-50A, EA934DM-10 / 14Esco Part No. EA934WF-50 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱5,752.23Min. 2 days
- Henkel 455-10 syringe gun (for 10ml)Mass (g) 140 Trusco Part No. 480-1245 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shape Color Redfrom ₱2,877.76Min. 2 days
- ESCO Mixing nozzle (for EA934DM-9-14 / 12 nozzles)Mixing nozzle for EA934DM-10 / 14. Screw nozzle 2 liquids can be mixed and discharged. * Please use EA934WF-50 together. (Sold separately)Overall Length (mm) 150 Mass (g) 51.4, 4.3 (per bottle) Esco Part No. EA934DM-100 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱2,425.48Min. 2 days
- Konishi Cartridge dispenser H293JPMSuitable for (Cartridge) 05373 Mass (kg) 1.4 Height (mm) 190 Length (mm) 360 Trusco Part No. 447-4961 Main Works Panel frame, parts, 3D shape
- Koatsu Gas Kogyo Pegaloc G exclusive gunGun for exclusive use of Pegalock G (50g cartridge)Trusco Part No. 122-6860 Mass (g) 180 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱6,574.57Min. 3 days
- 3M 3M 2 liquid adhesive gun EPX 200 / 400ml applicatorA dedicated gun for 3M 2-component mixed adhesive. The Scotch-Weld (TM) EPX (TM) Adhesive System is a system that quantitatively mixes and discharges a two-component mixed adhesive. Eliminates the hassle of mixing two liquids and provides stable adhesiveness. Discharge of adhesive with capacities... Read MoreClassification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱18,498.43Min. 46 days
- Konishi Extension tube 300.812Suitable for 05373 Overall Length (mm) 195 Mass (g) 40 Trusco Part No. 447-4911 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱394.31Min. 4 days
- Fujitec Jumbo gunGun for jumbo cartridges such as flooring adhesives Gun for jumbo cartridges such as flooring adhesivesOverall Length (mm) 440 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱534.11Min. 4 days
- TILEMENT Mixing nozzleA nozzle dedicated to the dual tight system that sufficiently stirs and mixes SGA adhesives.Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱35,767.46Min. 4 days
- 3M Scotch-Weld EPX Adhesive 45mL Mixing NozzleMixing nozzle for 3M [[TM]] EPX adhesive 45ml. For adhesion between metals, resins, and metals * Since this product is not intended for general consumers, the labeling and instruction manuals are not indicated or included for general consumers.Overall Length (mm) 105 Quantity of the Hazardous 3.3g Trusco Part No. 479-6179 Classification of the Hazardous Designated combustibles Adhesive Materials Metal, PP / PE Hazardous Class Other ones Main Works Panel frame, parts, 3D shape Name of The Hazardous Synthetic resinsfrom ₱9,452.74Min. 2 days
- 3M Scotch-Weld Scotch Weld Green Mixing NozzleTwo-component mixed type adhesive applicator, EPX dedicated nozzle For DP100, DP100PLUS, DP105, DP125, DP190, DP810 * Since this product is not intended for general consumers, the labels and instruction manuals are not indicated or included for general consumers.Trusco Part No. 161-5936 Classification of the Hazardous Non-dangerous goods
- 3M 3M 2 liquid adhesive gun EPX 200ml air applicatorA dedicated gun for 3M 2-component mixed adhesive. The Scotch-Weld (TM) EPX (TM) Adhesive System is a system that quantitatively mixes and discharges a two-component mixed adhesive. Eliminates the hassle of mixing two liquids and provides stable adhesiveness. Discharge of adhesive with a capacity... Read MoreClassification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapefrom ₱152,090.86Min. 7 days
- 3M Scotch-Weld EPX PLUS2 ApplicatorSpecial gun for adhesives. Applicator for 3M (TM) Scotch Weld (TM) two-component adhesive (capacity 45-50ml). A fixed amount of main agent and curing agent in a cartridge are mixed with a dedicated hand gun and a dedicated nozzle, and then discharged. Stable adhesion can be obtained without the t... Read MoreMass (g) 300 Color Gray Classification of the Hazardous Non-dangerous goodsfrom ₱78,080.71Min. 6 days
- Hermetic Helmeresin INJECT 740 exclusive gunMain Works Panel frame, parts, 3D shapefrom ₱16,031.42Min. 8 days
- Henkel Epoxy adhesive nozzle for quick mixReplacement nozzle for quick mix only. * Be sure to read how to use Quick Mix before use.Trusco Part No. 416-6051 Mass (g) 6
- Araldite 50mL dedicated gunA dedicated plastic gun that can discharge two-component types at the same time. Adhesion of various metals, plastics, stones, glass, and ceramics exclusively for 50mL. Insulation adhesion and casting of electrical and electronic parts.Height H x Length L x Width W (mm) 134×183×55 Mass (g) 290 Trusco Part No. 393-9502 Color Gray / black Adhesive Materials Metal Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapeDiscontinued
- Araldite Araldite 50mL MixerOverall Length (mm) 104 Mass (g) 3 Trusco Part No. 393-9511 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapeDiscontinued
- 3M EPX applicatorTrusco Part No. 218-7043 Suitable for EPX adhesive applicator Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapeDiscontinued
- Henkel Replacement Nozzle for Two-component Rapid Cure Cyanoacrylate adhesive 3092Capacity (g) 10 Mass (g) 26 Trusco Part No. 480-1261 Color Orange Main Works Panel frame, parts, 3D shapeDiscontinued
- Araldite 2000 epoxy nozzleThere is no need for "weighing and mixing" that is typical of 2-component room temperature curing epoxy adhesives. Zero "blending mistakes" and "mixing mistakes" greatly reduce the problem of poor adhesion. It is possible to mix and fill with "bubble-free",... Read MoreMass (g) 1 Overall Length (mm) 160 Trusco Part No. 384-8507 Adhesive Materials Metal Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shape Color WhiteDiscontinued
- Araldite 2000 Epoxy GunsA dedicated metal gun that can discharge two-component types at the same time. Corresponds to a mixing ratio of 1: 1 Adhesion of various metals, plastics, stones, glass, and ceramics. Insulation adhesion and casting of electrical and electronic parts. * Cannot be used for 2014-1 and 2014-1-200Adhesive Materials Metal Main Works Panel frame, parts, 3D shape Color Red / blackDiscontinued
- ESCO Mixing nozzle (10)Mixing nozzle for EA934WD-50A, (old) EA934WE-50A. It can also be used for EA934WB-2.Nozzle Length (mm) About 70 Esco Part No. EA934WF-1A Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapeDiscontinued
- Konishi Mixing nozzle MGQ08-24DMixing nozzle for H293JPM. Adhesive filling of anchors and streaks.Suitable for 05373 Mass (g) 110 Overall Length (mm) 162 Trusco Part No. 447-4970 Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapeDiscontinued
- Araldite 2000 Epoxy Special Air Blow GunA dedicated gun that is automatically driven by compressed air that can discharge two liquid types at the same time. The discharge speed can be adjusted. Adjustable discharge speed for all compounding ratios Two-component mixed cartridge adhesive Launch gun for Araldite 2000 series. Adhesion of v... Read MoreMass (kg) 2 Height (mm) 300 Trusco Part No. 384-8400 Length (mm) 400 Width (mm) 70 Driving System Automatic drive with compressed air Color Gray / black Adhesive Materials Metal Classification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapeDiscontinued
- 3M 3M Weld EPX adhesive dedicated nozzleOverall Length (mm) 147 Trusco Part No. 218-7183 Mass (g) 4Discontinued
- 3M 3M + 2 liquid adhesive dedicated gun + EPX + 400ml + air applicatorA dedicated gun for 3M 2-component mixed adhesive. The Scotch-Weld (TM) EPX (TM) Adhesive System is a system that quantitatively mixes and discharges a two-component mixed adhesive. Eliminates the hassle of mixing two liquids and provides stable adhesiveness. Discharge of adhesive with a capacity... Read MoreClassification of the Hazardous Non-dangerous goods Main Works Panel frame, parts, 3D shapeDiscontinued
- goot (TAIYO ELECTRIC) Hot bondAn easy-to-use gun type adhesive. Since 100% solid content that does not contain solvent is heat-treated and adhered, it exhibits strong adhesive strength without harmful molten material odor.Mass (g) 100 Dimension (mm) 130×115 Included Accessories 3 adhesive sticks, simple stand Power Supply AC100V・50/60Hz・7W Complete Curing Lime About 1 to 4 minutes Bonding time (seconds) About 10 Classification of the Hazardous Non-dangerous goods Heating Element PTC heater, operating temperature 160 ℃ Main Works Panel frame, parts, 3D shapeDiscontinued
- Araldite [There is a reason] 2000 Epoxy gunA dedicated plastic gun that can discharge two-component types at the same time. A dedicated plastic gun that can discharge two-component types at the same time. Compatible with all compounding ratios Adhesion of various metals, plastics, stones, glass, and ceramics. Insulation adhesion and casti... Read MoreCommodity condition * Reasonable (unused / exterior) Mass (kg) 1 Height (mm) 220 Length (mm) 350 Trusco Part No. 384-8493 Width (mm) 70 Color Gray / black Classification of the Hazardous Non-dangerous goodsDiscontinued
- Koatsu Gas Kogyo Pegaloc-Especially strong adhesion to various metals, ceramics, FRP, etc. -Excellent heat resistance and short fixing time. -Can be adhered even on a slight oil surface, making pretreatment easy. -Handy type that can be used immediately on site. Example of use: Bus fender panels, Kasagi corners, metal d... Read MoreDiscontinued
- Devcon Mark 5 gunGuns for Devcon PW1, Devcon PW2, 1-Minute Epoxy, 5-Minute Epoxy, 5-Minute Epoxy Gel * If the trigger is heavy, do not pull it forcibly and check if the adhesive is clogged. * Adhesive and nozzle are not included.Mass (g) 255 Trusco Part No. 324-2684 Classification of the Hazardous Non-dangerous goodsDiscontinued