Display Furniture & Fixtures

* The working load varies depending on the support and shelf support used.

Wooden metal fittings for slit hole-mounted shelf installation system. Please purchase on the left and right. For horizontal wooden shelves * The weight of the shelf support varies depending on the mating pillar. Please select the appropriate product from the design stage in consideration of the ... Read More

A transparent partition plate made of durable PET resin. The four corners are rounded and rounded. As a partition plate for store displays and shelf displays. * Please refrain from using it for any other purpose. * Please do not use in high temperature places. * Do not place near fire as it is da... Read More

*Due to the characteristics of the material, this product may have small scratches or scratches due to contact between products, but please note that this is not a defect. *Since this product is manufactured by injection molding, there are 2 to 3 gate openings for injecting resin into the mold at... Read More

A wealth of items to keep your kitchen tidy. Material: Iron wire / epoxy powder coating Net part pitch: 50mm

The head is smaller than the general standard product, and there is reinforcement to have meat under the neck to supplement the strength. Special tapping screw with a special tip drill to fix the channel type support to the royal thick stud (except ASF-52) * Cannot be used for commercially availa... Read More

Bracket for glass shelves

A shelf holder for glass shelves with cushioning material. With tip misalignment prevention For glass shelves

Only R type bracket is compatible with dimensions 0 to 4 Automatic lock type retaining standard equipment (Therefore, RKY is not required, and when using RPK, it is necessary to remove the standard equipment) Arm metal fittings for glass shelves (with a front tip displacement prevention structure... Read More

* For the actual size, use the effective dimension (length from the root to the rise) + 1.5 cm as a guide.

Spill prevention 4Φ wire (K-4S) installation, T-shaped 90 degree corner metal fittings * 4M spill prevention screw (KN) must be used together to fix to the glass shelf. * 4M spill prevention screw (KN) or spill prevention driving screw bolt (4B) must be used together to fix to the wooden shelf.

Organize the inside of the drawer Organize the inside of the drawer! With the partition plate and stand, you can freely partition. Since it is a stand type, even one piece can stand on its own, and it is OK to partition only vertically or horizontally! You can connect them using a single stand an... Read More

Heading 45 mm width POP compatible partition plate. For shelf headings of books, DVDs, etc.

Material: Body / ABS resin Sucker / Polyurethane / Synthetic rubber Mesh stopper / Polypropylene Load capacity: 5kg (including mesh panel weight and 2 suction cups) The mesh panel can be easily installed with a powerful suction cup. Can be used for interior mesh.

R type bracket Automatic lock type Retaining standard equipment Face out guard (FOC) Name 25 can be installed Face parts for hanger display that are directly attached to the foundation columns for installation systems such as slit hole-mounted shelves. * Retaining RPK cannot be used

Dedicated dowels for customizing compatible wooden shelf brackets or L dowels (LDs) into simple fixed dowels at construction sites * Please note that the drilling position on the wooden shelf is different from that of KD.

Arm brackets and slim brackets for glass shelves for installation systems such as slit-hole shelves. (With a structure to prevent slippage in front of the tip) B type bracket * Not compatible with PSL processing (PH processing)

B type bracket Need to be used with WB-032 Arm metal fittings for wooden shelves for installation systems such as slit hole-mounted shelves For plating, painting, and other processing (semi-finished fabric of B-033) * Shelf board fixing is a prerequisite product, so no steady rest is required (ei... Read More

POS compatible! You can flip it up and scan barcodes while it is installed on the shelf board. Equipment "card case (PET / PVC)" Convenient sales promotion fixtures and tool products.

Dedicated dowel wooden shelves for customizing compatible wooden shelf brackets to wooden shelf fixed dowel type products at construction sites

It has a smaller head than the general standard and is reinforced under the neck to give it strength. Screws that secure the channel columns to the wooden base * Color painting is available only on the screw head.

R type bracket only Dimension 0-4 compatible Automatic lock type retaining standard equipment Arm metal fittings for wooden shelves in the installation system such as slit hole hanging type shelves * Shelf board fixing is a prerequisite product, so no steady rest is required (either simple fixing... Read More

It is a bracket for wooden shelves of the same level as A-32 / A-33. Please use it as an intermediate receiver. Horizontal bracket for wooden shelves * Allowable load is a guide when using ASF-1.

General standard wood screws used when screwing wooden shelf boards to arm brackets for wooden shelves

Only size 0-4 compatible Automatic lock type retaining standard equipment A type bracket can be used together Same level bracket: A-78S Anti-sway (NPL) standard equipment (However, SL can be used separately if it is attached to the tip pipe and the anti-sway is also used on the claw side) PSL pro... Read More

As a display item at the store

We have 3 different lengths.

Safe load → Static load with brackets on both sides (when using two) * The above load uses Royal Support ASF-1. When used at 920 mm intervals. * When the screw is working with the base completely. * When using Support AWF-5, it will be 50% of the above load. * Safety load is a reference value. Pl... Read More

Round pipe for horizontal display of hangers

B type bracket. Arm metal fittings for wooden shelves in the installation system such as slit hole hanging type shelves * Shelf board fixing is a prerequisite product, so no steady rest is required (either simple fixing dowel type or WT-P screw fixing is required) * Cannot be used to prevent it f... Read More

Dedicated to GP dowel pillar system, dowel for hooking type wooden shelf board installation