Exterior Parts

Pressure-sensitive adhesive: Rubber-based non-migratory.

There is a non-slip EVA pad on the bottom.

Please use it to protect the cable when passing through the cabinet. It can be attached to the knockout of the plastic box (PA, OP-A, OPK-A). The applicable plate thickness is t0.8 to 4.0mm, and it can also be used for metal cabinets. Use BP14-36UG as a cable protection grommet for exposed wiring... Read More

Please use it to protect electric wires. * Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.

Bolt type rubber feet. There are sizes from 10Φ to 38Φ.

A convenient strap for carrying around. The string part is black nylon. It can be easily and quickly removed even after it is attached to the case. Attach by drilling Φ5 on the side of the case.

Please use it to protect openings such as cabinets and bases. Please use it by cutting it according to the outer circumference of the hole. It can also be used outdoors. * Please note that the core metal may rust if the cut part is not properly processed.

A cap for draining water generated by dew condensation inside the cabinet. Since the cover and body have a screw-tightened structure, they can be easily installed simply by drilling holes. The hole plug mounting part (Φ20) of the metal cabinet can be used as it is. * The mounting position is the ... Read More

Hot-stamped resin vanity feet with non-slip pads on the bottom. Best suited for audio equipment.

Fully protects the edges of the panel chassis. Made of 6 nylon with excellent insulation and abrasion resistance, it has excellent wire protection performance. Ideal for square holes and straight lines on the edges. Available in sizes from thin (0.6 mm) to thick (3.2 mm) panels.

Since it is cut and used according to the periphery of the hole, it can be used for holes of any diameter, and can be freely used for square holes and deformed holes. If it is a large hole, it can be added and used. Has excellent electrical insulation and wear resistance.

For indoor use only. Please use it for electric wire support at the cable entrance of the cabinet. Mounting to the cabinet is possible only by drilling round holes. A wide entry/exit port can be secured, and workability is excellent.

Please use it to protect openings such as cabinets and bases. Please cut according to the outer circumference of the hole.

A cap for draining water generated by condensation inside the cabinet. Since the cover and body have a screw-fastened structure, they can be easily installed just by drilling. The hole plug mounting part (Φ20mm) of the metal cabinet can be used as it is.

* Please note that the customer will be responsible for any in-house shipping charges for the delivery of this product.

Please use it for mounting the plastic instrument box. * The color may differ from the image, so be sure to check the Munsell value.

A power meter conforming to JIS C 1211 can be installed.

Convenient for inspection and operation of control panels, etc. * Differences may occur depending on the type of chemicals and oil, and the environmental conditions of the installation location, so be sure to check the performance in a practical test according to the purpose of use before use. * ... Read More

Securely close unnecessary push button mounting holes. Since it uses a packing expansion method, it is reliable in dustproof and waterproof performance.