Output smoothness 0.1% or less Insulation Resistance (MΩ) 100 or more DC500V Withstand Voltage AC500V for 1 minute Input Voltage (V) DC36 or less / 50 ℃ Type Other displacement sensors Resistance Tolerance (%) ±20 Temperature resistance ±400ppm/K
<Compact> CMOS laser sensor realized in the industry's smallest class * shape (* As of May 2015, according to the manufacturer's research) <Overwhelmingly stable detection> Achieves high-precision detection on the order of 1/100 mm Equipped with convenient functions
Compact an... Read More
Temperature Characteristics 0.03% F.S./℃ Installation Altitude (m) 2000 or less Ambient Humidity to Use 35-85% RH, Storage: 35-85% RH Power Supply Voltage (V) DC12 ～ 24 ± 10% Ripple P-P10% Short Circuit Protection Equipped (automatic return type) Protection Class IP67(IEC) Response Time Switchable between 1.5ms / 5ms / 10ms Standard UL/C-UL、CE、FDA
A 20mm stroke model of a conductive plastic potentiometer.
Operating Temperature Range (℃) -40～+100 Rated Power (W) 0.6(70℃) Mass (g) About 60 Stroke (mm) Valid: 20 Single linearity (%) ±1FS Dimension (mm) Φ25×(MAX)103
Operation Ambient Temperature (℃) 0 to +50 (with no condensation) Storage Humidity Range 35～85%RH Operating Humidity Range 35～85%RH Type Measuring sensor
Green Pot contact type (using conductive plastic resistance element) Linear displacement sensor detection stroke: 20 mm Two types of input axis interfaces are available
Output smoothness 0.1% or less Rated Power (W) 0.6(70℃) Effective stroke (mm) 20±0.5 Mass (g) About 60 Type Measuring sensor Single linearity (%) ±1 Resistance Tolerance (%) ±20
The long-distance laser displacement sensor HLA series uses red laser light as a light source to enable long-distance and wide-range displacement measurement.
Detection Range (mm) 50～250 Detection Distance (m) 0.77 Current Consumption (mA) 16 Detection Method Reflective type
Response Time 100ms / 10ms / 1ms switch switching Laser Class 2 Output (mW) 3.3 max Wavelength (nm) 650 Power Supply Voltage (V) DC12～24 (+10%、-5%) Protection Class IP67(IEC) Type Measuring sensor Sensitivity Set / Fit / Auto switch switching Operation Set / Run / Run off delay Switch switch Temperature Characteristics ± 0.02% FS / ℃ (drift)
A red semiconductor laser is used for the light emitting element and a CCD is used for the light receiving element. By creating ideal parallel light, highly accurate measurement is possible.
* Be sure to use the sensor head and controller as a set.
Midori Precisions Linear Displacement Sensor LP-FJ SeriesOutput smoothness 0.1% or less Insulation Resistance (MΩ) 100 or more DC500V Withstand Voltage AC500V for 1 minute Input Voltage (V) DC36 or less / 50 ℃ Type Other displacement sensors Resistance Tolerance (%) ±20 Temperature resistance ±400ppm/K
