All Category

Urethane Rubber Plates / Sheets

Other Related Pages

View : Grid List
Filter

34 Item(s)

Set Ascending Direction
  1. Foamed Urethane Filtration Sheet (Urethane Sound-ABSorbing Calmflex F2)
    INOAC Foamed Urethane Filtration Sheet (Urethane Sound-ABSorbing Calmflex F2)
    It has excellent sound absorption (sound absorption rate is about 20% higher than that of glass wool). Factory noise countermeasures. Soundproofing measures for OA such as printers and copiers, and home appliances.
    Abrasive Grit Size  Operating Temperature Range  -20~70℃  Width (mm)  1000  Length (mm)  1000  Density (kg/m3 25  Color  Black  Material  Urethane 
    Rating:
    82%
    from ₱698.57
    Min. 2 days
  2. Urethane Sheet Hardness A70
    No Brand Urethane Sheet Hardness A70
    Mechanical strength, wear resistance, oil resistance, cold resistance, ozone resistance Various packings, cushioning materials, couplings, bushes, scrapers, roller base materials, springs, dies
    Specific Gravity  1.2  Tensile Strength (MPa [kgf/cm2])  27.7[283]  Tear Strength (kN/m)  36.4[37]  Elongation at Cutting (%)  630  Hardness (JIS A)  70  Material  Urethane rubber 
    Rating:
    91%
    from ₱287.41
    Min. 2 days
  3. Urethane Sheet Hardness A50
    No Brand Urethane Sheet Hardness A50
    Mechanical strength, wear resistance, oil resistance, cold resistance, ozone resistance Various packings, cushioning materials, couplings, bushes, scrapers, roller base materials, springs, dies * The colors may differ slightly when comparing the actual products. (We do not accept returns due to d... Read More
    Specific Gravity  1.4  Tensile Strength (MPa [kgf/cm2])  26.6[271]  Tear Strength (kN/m)  28.6[29]  Hardness (JIS A)  50  Elongation at Cutting (%)  610  Material  Urethane rubber 
    Rating:
    100%
    from ₱406.64
    Min. 2 days
  4. Polon sponge with adhesive
    WAKI Polon sponge with adhesive
    High shock absorbing material. The compression residual strain is small. Lightweight and highly shock-absorbing. There is little settling. For OA equipment, automobile parts, sports equipment, sealing materials for shoes, packing materials, cushioning materials, etc. * If left in direct sunlight ... Read More
    Color  Black  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    92%
    from ₱139.39
    Min. 2 days
  5. Urethane Foam Cushioning Sheet
    INOAC Urethane Foam Cushioning Sheet
    It has excellent cushioning and is lightweight. Gap joint material, packing material, sealing material, various cushioning materials. * This item cannot be delivered to private homes.
    Abrasive Grit Size  Operating Temperature Range  -20~70℃  Width (mm)  1000  Length (mm)  1000  Hardness (N)  107.9±22.6  Density (kg/m3 22  Color  Gray  Material  Urethane 
    Rating:
    65%
    from ₱492.99
    Min. 2 days
  6. High density urethane sheet black
    INOAC High density urethane sheet black
    It is a material with ultra-high hardness (hard to crush) and ultra-high coefficient of friction (hard to slip). It has excellent energy absorption and absorbs vibration and shock. Since it does not contain a plasticizer, there is very little contamination of other materials or deterioration of p... Read More
    Length (mm)  1000  Density (kg/m3 48  Width (mm)  500  Color  Black  Operating Temperature Range  Room temperature to 70 ° C  Material  Urethane 
    Rating:
    76%
    from ₱1,397.56
    Min. 2 days
  7. Foamed Urethane Filtration Sheet
    INOAC Foamed Urethane Filtration Sheet
    It has excellent filtration performance, breathability, chemical resistance, and cleaning and regeneration. Ideal for chemicals such as benzine, ethyl acetate, acetone, gasoline, ethanol, methanol, carbon tetrachloride, spindle oil, machine oil, linseed oil, and rapeseed oil. Air conditioner filt... Read More
    Operating Temperature Range  -20~70℃  Length (mm)  1000  Width (mm)  1000  Density (kg/m3 30  Color  Black  Material  Urethane foam 
    Rating:
    90%
    from ₱1,233.09
    Min. 2 days
  8. Microcell Urethane Roll PORON Black
    INOAC Microcell Urethane Roll PORON Black
    There is little compression residual distortion. Has excellent sealing properties. A high-performance foam sheet with a high-density, extremely fine and uniform cell structure. For cushioning material and packing material
    Length (m)  Length (mm)  1000  Specification  2.7% compression set  Color  Black  Material  High density microcell urethane foam 
    from ₱254.51
    Min. 2 days
  9. Urethane sheet hardness A60
    No Brand Urethane sheet hardness A60
    Mechanical strength, wear resistance, oil resistance, cold resistance, ozone resistance Various packings, cushioning materials, couplings, bushes, scrapers, roller base materials, springs, dies
    Specific Gravity  1.2  Tensile Strength (MPa [kgf/cm2])  23.7[242]  Tear Strength (kN/m)  36.6[37]  Hardness (JIS A)  60  Elongation at Cutting (%)  740  Material  Urethane rubber 
    Rating:
    100%
    from ₱616.34
    Min. 2 days
  10. Adhesive EPDM Sponge Rubber
    WAKI Adhesive EPDM Sponge Rubber
    It is highly wear resistant and elastic, and has excellent mechanical properties.
    Operating Temperature Range (℃)  -20~80  Width (mm)  30  Length (mm)  300  Dimensions, Width W x Length L (mm)  30×300  Color  Black  RoHS directive (corresponding to 10 substances)  Correspondence  Shape  Square 
    Rating:
    87%
    from ₱159.94
    Min. 2 days
  11. Moltofilter (Soft Urethane Foam)
    WAKI Moltofilter (Soft Urethane Foam)
    Has excellent filtration performance.
    Thickness (mm)  Length (mm)  500  Width (mm)  500  Dimension (mm)  500×500 
    Rating:
    70%
    from ₱534.11
    Min. 2 days
  12. Human skin gel sheet
    EXSEAL Human skin gel sheet
    It is a sheet of ultra-soft material with adhesiveness on both sides. It is soft and has excellent followability. The material itself is self-adhesive. Since it is self-adhesive, there is no transfer of glue. Masking, temporary fixing, packing, cushioning material. * Single-sided non-adhesive typ... Read More
    Color  Milky white  Material  Urethane 
    Rating:
    80%
    from ₱3,165.58
    Min. 2 days
  13. CALM FLEX F-4 with Single-Sided Adhesive
    INOAC CALM FLEX F-4 with Single-Sided Adhesive
    It absorbs the sound of air vibration. With a urethane film on the surface, it has excellent medium frequency sound absorption. The thicker the thickness, the better the sound absorption characteristics. Absorption of high-frequency sound with a frequency of 2000 Hz or higher.
    Width (mm)  1000  Length (mm)  1000  2018 Trusco page  2 0213  Color  Black  Material  Urethane foam, acrylic adhesive 
    from ₱1,520.91
    Min. 2 days
  14. Gel sheet for human skin non-adhesive on one side
    EXSEAL Gel sheet for human skin non-adhesive on one side
    A sheet with a film that suppresses adhesion on one side of the gel sheet for human skin. It is soft and has excellent followability. The material itself is self-adhesive. Since it is self-adhesive, there is no transfer of glue. Masking, temporary fixing, packing, cushioning material. * Double-si... Read More
    Dimension (mm)  400×500  Hardness  Asker C0  Color  Milky white  Material  Urethane 
    Rating:
    92%
    from ₱3,165.58
    Min. 2 days
  15. CALM FLEX F-4LF with Single-Sided Adhesive
    INOAC CALM FLEX F-4LF with Single-Sided Adhesive
    It absorbs the sound of air vibration. With a urethane film on the surface, it has excellent low-frequency sound absorption. The thicker the thickness, the better the sound absorption characteristics. Absorption of low frequency sound with a frequency of 2000Hz or less.
    Width (mm)  1000  Length (mm)  1000  2018 Trusco page  2 0214  Color  Black  Material  Urethane foam, acrylic adhesive 
    from ₱1,932.08
    Min. 2 days
  16. Flexible Urethane Foam
    WAKI Flexible Urethane Foam
    For non-slip and simple protection. It can be easily processed with scissors and a utility knife.
    Thickness (mm)  10  Dimension (mm)  250×250 
    from ₱98.27
    Min. 2 days
  17. Flexible urethane foam
    INOAC Flexible urethane foam
    It has good breathability and excellent filtration performance. It can be easily processed with scissors and a utility knife. Can be washed with water or a neutral detergent. For cushioning materials and filters * Do not use near fire or outdoors. * Due to the material, it may expand and contract.
    Width (mm)  250  Height (mm)  250  Color  Black 
    Rating:
    60%
    from ₱394.31
    Min. 2 days
  18. Urethane sheet hardness A70
    TIGERS POLYMER Urethane sheet hardness A70
    Mechanical strength: Due to its chemical structure, it has a strong secondary bond between molecules, so it has the highest strength among elastic bodies, and because of its high modulus, it is less deformed and can withstand heavy loads even with small objects. .. Due to its high hardness and hi... Read More
    Specific Gravity  1.2  Tensile Strength (MPa [kgf/cm2])  27.7  Compression Set(%)  28  Tear Strength (kN/m)  36.4  Rebound Resilience (%)  50  Hardness  Type A / 70  Material  Urethane rubber (polyester)  Elongation (%)  When disconnected / 630 
    from ₱192.84
    Min. 2 days
  19. Cell damper
    WAKI Cell damper
    For noise control! It softens the vibration transmitted by placing it on the sound source and the floor ground plane. Vibration can be reduced due to the excellent damping effect. Very low pollution (no traces left). Used as a foot rubber anti-vibration material for heavy loads such as washing ma... Read More
    Thickness (mm) 
    from ₱172.28
    Min. 2 days
  20. Urethane foam sheet
    INOAC Urethane foam sheet
    Has excellent water resistance and weather resistance. As a door stop, gap joint material, and weather resistant waterproof sheet. Packing material, sealing material.
    Operating Temperature Range  -20~70℃  Length (mm)  1000  Width (mm)  1000  Density (kg/m3 45  Color  Gray  Material  Urethane foam 
    from ₱1,808.73
    Min. 2 days
  21. Calm flex (with adhesive)
    INOAC Calm flex (with adhesive)
    It is a damping material that softens vibration just by sticking it near the source of vibration. Can be cut with a cutter or scissors. Absorbent material, damping material.
    Operating Temperature Range (℃)  -20~50  Width (mm)  1000  Length (mm)  1000  Color  Black  Adhesive  Butyl rubber  Material  Butyl rubber 
    Rating:
    100%
    from ₱3,247.81
    Min. 2 days
  22. CALMFLEX F-2 with Single-Sided Adhesive
    INOAC CALMFLEX F-2 with Single-Sided Adhesive
    It absorbs the sound of air vibration. Lightweight, low price and can be used for a wide range of purposes. The thicker the thickness, the better the sound absorption characteristics. Absorption of high-frequency sound with a frequency of 2000 Hz or higher.
    Width (mm)  1000  Length (mm)  1000  2018 Trusco page  2 0212  Color  Black  Material  Urethane foam, acrylic adhesive 
    from ₱1,027.51
    Min. 2 days
  23. Calm flex cut off
    INOAC Calm flex cut off
    It absorbs the sound of air vibration. With a urethane film on the surface, it has excellent low-frequency sound absorption. The thicker the thickness, the better the sound absorption characteristics. Absorption of low frequency sound with a frequency of 2000Hz or less.
    Width (mm)  1000  Length (mm)  1000  2018 Trusco page  2 0214  Color  Black  Material  Urethane foam 
    from ₱2,425.48
    Min. 2 days
  24. Calm Flex F140
    WAKI Calm Flex F140
    For noise control! Create an enclosure at the sound source and attach it inside to soften the sound transmitted to the wall surface. The density of urethane foam is high, and it has excellent sound absorption.
    Dimension (mm)  400×1000  Material  Urethane foam 
    from ₱2,795.53
    Min. 3 days
  25. Cell damper
    INOAC Cell damper
    Vibration can be reduced due to the excellent damping effect. Very low pollution. Uses halogen-free flame-retardant material (special urethane) (no traces left). Anti-vibration material for heavy loads such as machines.
    Operating Temperature Range  -20~70℃  Length (mm)  1000  Thickness (mm)  Width (mm)  500  Color  Black  Material  Urethane foam 
    from ₱4,518.73
    Min. 2 days
  26. Calm flex makeup cutting
    INOAC Calm flex makeup cutting
    It absorbs the sound of air vibration. Lightweight, low price and can be used for a wide range of purposes. The thicker the thickness, the better the sound absorption characteristics. Absorption of high-frequency sound with a frequency of 2000 Hz or higher.
    Length (mm)  1000  Width (mm)  1000  Color  Black  Material  Urethane foam 
    from ₱657.46
    Min. 2 days
  27. Ohm flex
    INOAC Ohm flex
    It is an antistatic material. It has cushioning properties and small compression residual strain.
    Operating Temperature Range  -20~70℃  Thickness (mm)  10  Width (mm)  1000  Length (mm)  1000  Volume Resistivity (Ωcm)  1×10"  Color  Pink  Material  Urethane foam 
    Rating:
    100%
    from ₱1,932.08
    Min. 2 days
  28. Cell damper
    INOAC Cell damper
    Vibration can be reduced due to the excellent damping effect. Very low pollution. Uses halogen-free flame-retardant material (special urethane) (no traces left). The load capacity is 130 to 270 kg. Anti-vibration material for heavy loads such as machines.
    Operating Temperature Range (℃)  -20~70  Length (mm)  1000  Thickness (mm)  Width (mm)  500  Color  Black  Material  Urethane 
    from ₱6,985.74
    Min. 2 days
  29. Environmentally friendly foam sheet Super sheet
    WAKI Environmentally friendly foam sheet Super sheet
    Compared to conventional foam sheets, it has excellent waterproofness, airtightness, sound absorption, cushioning, and less odor. It is a highly functional foam sheet that is basically safe and environmentally friendly with no color transfer.
    Color  Black  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Special urethane foam 
    from ₱254.51
    Min. 4 days
  30. Calm flex cut off
    INOAC Calm flex cut off
    It absorbs the sound of air vibration. With a non-woven fabric on the surface, it has excellent light resistance and absorption of medium frequency sound. The thicker the thickness, the better the sound absorption characteristics. Sound absorption of about medium frequency.
    Length (mm)  1000  Width (mm)  1000  Color  Black  Material  Urethane foam 
    from ₱1,233.09
    Min. 3 days
  31. Microcell urethane PORON (R) Black
    INOAC Microcell urethane PORON (R) Black
    There is little compression residual distortion. Has excellent sealing properties. A high-performance foam sheet with a high-density, extremely fine and uniform cell structure. For cushioning material and packing material
    Length (m)  15  Specification  2.7% compression set  Thickness (mm)  Color  Black  Material  High density microcell urethane foam 
    from ₱10,275.08
    Min. 32 days
  32. Calm Flex F55
    WAKI Calm Flex F55
    For noise control! Create an enclosure at the sound source and attach it inside to soften the sound transmitted to the wall surface. With non-woven fabric: Excellent weather resistance. Paste the other side of the non-woven fabric.
    Dimension (mm)  400×1000 
    from ₱1,479.79
    Min. 3 days
  33. Microcell urethane PORON black
    INOAC Microcell urethane PORON black
    There is little compression residual distortion. Has excellent sealing properties. A high-performance foam sheet with a high-density, extremely fine and uniform cell structure. For cushioning material and packing material
    Specification  2.7% compression set  Color  Black  Material  High density microcell urethane foam 
    from ₱3,165.58
    Min. 2 days
  34. Microcell urethane PORON (without tape)
    INOAC Microcell urethane PORON (without tape)
    There is little compression residual distortion. Has excellent sealing properties. A high-performance foam sheet with a high-density, extremely fine and uniform cell structure. For cushioning and packing materials.
    Mass (kg)  10  Material  High density microcell urethane foam  2018 Trusco page  2 0211  Trusco Part No.  818-4101 
    from ₱36,178.63
    Min. 32 days
View : Grid List
Filter

34 Item(s)

Set Ascending Direction