All Category

Screw-in Nuts

View : Grid List
Filter

26 Item(s)

Set Ascending Direction
  1. Onimut nut D type (trivalent white) (small box)
    Osaka Spirit Onimut nut D type (trivalent white) (small box)
    Embedded nut for woodworking. It is used by inserting it into the part where the female screw cannot be made due to the weak part strength. The insertion method is a screw-in type.
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    80%
    from ₱1,315.32
    Min. 2 days
  2. Onime Insert Nut D Type (Trivalent White) (Pack)
    Osaka Spirit Onime Insert Nut D Type (Trivalent White) (Pack)
    Embedded nut for woodworking. It is used by inserting it into the part where the female screw cannot be made due to the weak part strength. The insertion method is a screw-in type.
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    90%
    from ₱205.17
    Min. 2 days
  3. Onime Insert Nut E Type (Trivalent White) (Pack)
    Osaka Spirit Onime Insert Nut E Type (Trivalent White) (Pack)
    Embedded nut for woodworking. It is used by inserting it into the part where the female screw cannot be made due to the weak part strength. The insertion method is a screw-in type.
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    90%
    from ₱229.84
    Min. 2 days
  4. Onimut nut A type (trivalent white) (pack)
    Osaka Spirit Onimut nut A type (trivalent white) (pack)
    Embedded nut for woodworking. It is used by inserting it into a part where female threads cannot be made due to weak component strength. The insertion method is a driving type.
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    86%
    from ₱287.41
    Min. 2 days
  5. Onimut nut S type (trivalent white) (pack)
    Osaka Spirit Onimut nut S type (trivalent white) (pack)
    A screw-in type insert nut with a brim for woodworking. The spiral teeth on the outer circumference have low insertion resistance, prevent cracking, and screw straight in without difficulty. The special tooth tip makes the tensile strength and tightening torque even stronger. Since a hexagon wren... Read More
    Surface Treatment  Trivalent white 
    Rating:
    81%
    from ₱233.95
    Min. 2 days
  6. Onimut nut P type (trivalent white) (pack)
    Osaka Spirit Onimut nut P type (trivalent white) (pack)
    Embedded nut for woodworking. It is used by inserting it into the part where the female screw cannot be made due to the weak part strength. The insertion method is a screw-in type.
    Surface Treatment  Trivalent white 
    Rating:
    90%
    from ₱233.95
    Min. 2 days
  7. Onimut nut J type (packed product)
    Osaka Spirit Onimut nut J type (packed product)
    It is used by inserting it into a part where female threads cannot be made due to weak component strength. The insertion method is for driving legs.
    Material  Zinc alloy die casting  Pilot Hole Diameter (Φmm)  11.6~12  Surface Treatment  Trivalent white 
    Rating:
    93%
    from ₱233.95
    Min. 2 days
  8. Onimut nut C type (packed product)
    Osaka Spirit Onimut nut C type (packed product)
    It is used by inserting it into a part where female threads cannot be made due to weak component strength. The insertion method is a screw-in type.
    Material  Zinc alloy die casting  Pilot Hole Diameter (Φmm)  4.8~5.2  Surface Treatment  Trivalent white  Nominal Size of Screw  M4 
    Rating:
    88%
    from ₱233.95
    Min. 2 days
  9. Onimut nut E type (trivalent white) (small box)
    Osaka Spirit Onimut nut E type (trivalent white) (small box)
    Embedded nut for woodworking. It is used by inserting it into the part where the female screw cannot be made due to the weak part strength. The insertion method is a screw-in type.
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    80%
    from ₱1,315.32
    Min. 2 days
  10. Onimut nut B type (trivalent white) (pack)
    Osaka Spirit Onimut nut B type (trivalent white) (pack)
    Embedded nut for woodworking. It is used by inserting it into a part where female threads cannot be made due to weak component strength. The insertion method is a driving type.
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    83%
    from ₱176.39
    Min. 2 days
  11. Onimut nut S type (trivalent white) (small box)
    Osaka Spirit Onimut nut S type (trivalent white) (small box)
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    100%
    from ₱1,973.19
    Min. 2 days
  12. Onimut nut P type (trivalent white) (small box)
    Osaka Spirit Onimut nut P type (trivalent white) (small box)
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    from ₱1,973.19
    Min. 2 days
  13. Onime N (D type made by Murakoshi)
    Murakoshiseiko Onime N (D type made by Murakoshi)
    Material  Zinc alloy  Surface Treatment  Trivalent white  Nominal Size of Screw  M8 
    from ₱275.07
    Min. 2 days
  14. Onimut nut J type (trivalent white) (small box)
    Osaka Spirit Onimut nut J type (trivalent white) (small box)
    Material  Zinc alloy die casting  Pilot Hole Diameter (Φmm)  11.6~12  Surface Treatment  Trivalent white 
    Rating:
    100%
    from ₱2,178.78
    Min. 2 days
  15. Onimut nut I type (trivalent white) (pack)
    Osaka Spirit Onimut nut I type (trivalent white) (pack)
    It is used by inserting it into a part where female threads cannot be made due to weak component strength. The insertion method is a driving type.
    Material  Zinc alloy die casting  Surface Treatment  Zinc plating chromate treatment 
    from ₱233.95
    Min. 2 days
  16. Onimut nut M type (trivalent white) (pack)
    Osaka Spirit Onimut nut M type (trivalent white) (pack)
    It is used by inserting it into a part where female threads cannot be made due to weak component strength. The insertion method is a screw-in type.
    Material  Zinc alloy die casting  Surface Treatment  Chromate 
    Rating:
    90%
    from ₱233.95
    Min. 2 days
  17. Onimut nut G type (trivalent white) (pack)
    Osaka Spirit Onimut nut G type (trivalent white) (pack)
    It is used by inserting it into a part where female threads cannot be made due to weak component strength. The insertion method is an embedding type with adhesive.
    Material  Zinc alloy die casting  Thread Pitch  Pilot Hole Diameter (Φmm)  9.5~10  Surface Treatment  Zinc plating chromate treatment  Nominal Size of Screw  M6 
    Rating:
    60%
    from ₱233.95
    Min. 2 days
  18. Onimut nut B type (trivalent white) (small box)
    Osaka Spirit Onimut nut B type (trivalent white) (small box)
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    100%
    from ₱1,315.32
    Min. 3 days
  19. Onimut nut C type (trivalent white) (small box)
    Osaka Spirit Onimut nut C type (trivalent white) (small box)
    Material  Zinc alloy die casting  Pilot Hole Diameter (Φmm)  4.8~5.2  Surface Treatment  Trivalent white  Nominal Size of Screw  M4 
    Rating:
    100%
    from ₱4,029.03
    Min. 2 days
  20. Onimut nut A type (trivalent white) (small box)
    Osaka Spirit Onimut nut A type (trivalent white) (small box)
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    from ₱2,795.53
    Min. 2 days
  21. Onimut nut I type (trivalent white) (small box)
    Osaka Spirit Onimut nut I type (trivalent white) (small box)
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    Rating:
    100%
    from ₱2,178.78
    Min. 3 days
  22. Onimut nut P type wit size (chromate) (small box)
    Osaka Spirit Onimut nut P type wit size (chromate) (small box)
    Material  Zinc alloy die casting  Nominal Size  5/16×13  Surface Treatment  Chromate  Nominal Size of Screw  W5/16 
    from ₱2,014.31
    Min. 3 days
  23. Onimut nut M type (trivalent white) (small box)
    Osaka Spirit Onimut nut M type (trivalent white) (small box)
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white  Nominal Size of Screw  M4 
    from ₱2,302.13
    Min. 3 days
  24. Onimut nut M type (trivalent white) (small box)
    Osaka Spirit Onimut nut M type (trivalent white) (small box)
    Material  Zinc alloy die casting  Surface Treatment  Trivalent white 
    from ₱2,178.78
    Min. 3 days
  25. Onimye N (Type B (Iron / Trivalent White)
    Murakoshiseiko Onimye N (Type B (Iron / Trivalent White)
    Material  Iron (or standard)  Surface Treatment  Trivalent white  Nominal Size of Screw  M6 
    from ₱262.74
    Min. 4 days
  26. Onimut nut G type (trivalent white) (small box)
    Osaka Spirit Onimut nut G type (trivalent white) (small box)
    Material  Zinc alloy die casting  Pilot Hole Diameter (Φmm)  9.5~10  Surface Treatment  Trivalent white  Nominal Size of Screw  M6 
    from ₱2,713.29
    Min. 3 days
View : Grid List
Filter

26 Item(s)

Set Ascending Direction