Thin Screws

The course thread has a high thread and a long pitch, so it has excellent holding power, which is said to be five times that of nails.

The course thread is slim and the special cutting of the screw tip is OK for hard materials! Interior, exterior *Due to its nature, there is a risk of twisting when used on hard wood. Please use it after trial hitting. *When using on hard wood, etc., we recommend that you pre-drill holes before u... Read More

It is a slightly slender structure. Construction with power tools is possible.

Extra-fine specifications to prevent wood cracking. Extra-fine specifications of course thread. With flexible head with tip cut. It goes smoothly into hardwood, is hard to crack, and has a flexible head, so your head will sink.

The teeth (flexible) attached to the head allow the mating member to sit down and sink the head.

Martensitic SUS410 stainless steel has excellent hardenability and can be driven into hard boards without pilot holes.

By thinning the course thread with cut, it prevents wood cracking and can handle edge cutting. Even hard wood can be tightened comfortably with special cutting at the tip and a small flexible head. * Trivalent chromate = appearance color is close to UNIQLO (silver)

Holding power is about 5 times that of nails. The shaft is thin and the tip cracking process prevents wood cracking. Excellent bite with a flexible head. Mainly used for wood.

Austenitic SUS304 stainless steel has high corrosion resistance and is strengthened by increasing the material diameter.

By adopting ultra-high corrosion resistant plating, it is resistant to rust. It is less rusty than SUS410 and resistant to electrolytic corrosion with aluminum and plated steel sheets. Even if the plating layer is scratched, it will self-repair. Rust-resistant course threads self-repair and prote... Read More

By cutting the tip and reducing the screw diameter, it prevents wood cracking even if it is cornered. Martensitic SUS410 stainless steel has excellent hardenability and can be driven into hard boards without pilot holes. It sticks to the magnet.

Special surface treatment with a special tip shape that does not easily crack wood increases the screwing speed by 25% compared to the course thread (compared to the manufacturer's product)

The most common woodworking screw for working with power tools, with long thread spacing (coarse) and deep screw grooves. Flexible processing under the head cuts wood to prevent head floating. For woodworking * Screws may break due to overtightening. be careful. Please avoid using it for any purp... Read More

A single thread refers to a product with 8 threads. It has five times the holding power of nails due to its high thread thread and wide pitch. In addition, the tip is sharp and hardened to give it strength. Course threads were originally created as a replacement for nails. Due to changes in build... Read More

Since the legs are split, the burden on the wood is reduced. Hard to crack! The lengths of 13 and 16 mm are not split to prevent idling. The flex processing under the head cuts the wood to prevent the head from floating. Woodworking screw with a thin shaft that is easy to drive * Screws may break... Read More

Rust-resistant stainless steel! SUS304 Holding power 5 times stronger than nails! Rust-resistant stainless steel SUS304 is used, so it is safe to install around water or outside. It is recommended to make a pilot hole when used for hardwood.

Holding power is about 5 times that of nails. It is made of stainless steel and has excellent durability. Excellent biting with a flexible head. Mainly used for wood.

Strong and reliable stainless steel! SUS410 Uses stainless steel SUS410 with excellent strength. Stainless steel thin screw (slim screw). The tip is split to prevent wood cracking with an ultra-fine finish. With flexibility.

Rust-resistant stainless steel! SUS304 Holding power 5 times stronger than nails! Rust-resistant stainless steel SUS304 is used, so it is safe to install around water or outside. Flexible head. It is recommended to make a pilot hole when used for hardwood. * All screws are not perfect screws. It ... Read More

It is a rough construction screw. Since the screw pitch is coarse, it can be installed with relatively low torque.

25% faster screwing speed than course thread due to special surface treatment with special tip shape that does not easily crack wood (compared to manufacturer's products) Comes in a hard case that is convenient for storage

Strong and reliable stainless steel! SUS410 Uses stainless steel SUS410 with excellent strength. Stainless steel thin screw (slim screw). The tip is split to prevent wood cracking with an ultra-fine finish. With flexibility.

Holding power is about 5 times that of nails. It is made of stainless steel and has excellent durability. Mainly used for wood.

Trump cards for woodwork, abundant sizes! It cuts wood strongly, can be screwed in quickly, and tightens securely. For woodworking only

Rust-resistant stainless steel! SUS304 Holding power 5 times stronger than nails! Rust-resistant stainless steel SUS304 is used, so it is safe to install around water or outside. Flexible head. It is recommended to make a pilot hole when used for hardwood.

The most common woodworking screw for working with power tools, with long thread spacing (coarse) and deep screw grooves. Flexible processing under the head cuts wood to prevent head floating. Austenitic stainless steel (SUSXM7) that does not rust easily, making it ideal for outdoor use and aroun... Read More

Easy to take out and convenient to store Wood screws ・ Because the head is large, it is difficult for the seat to collapse

Ideal for wood base! White baking finish on the head. Since it is a course thread with a coarse pitch, it works well on a wooden base.

The most common woodworking screw for working with power tools, with long thread spacing (coarse) and deep screw grooves. Since the trumpet head has a large ground contact surface when buried in wood, it firmly fixes the wood to each other and makes it difficult for the head to be buried. For woo... Read More

Although it is made of iron, it is a course thread that is more resistant to rust than stainless steel (SUS410). Excellent strength by quenching. The plating has a self-healing function and is resistant to rust even if it is damaged.

Uses SUS305J1 with excellent rust prevention "Difficult to screw" against hard wood "Long-lasting battery" with reduced torque * This product uses SUS305J1 and is extremely resistant to rust, but it may rust early depending on the site of use, environment, and other factors.

Pull-out strength UP Excellent biting with a flexible head. Since the shaft is thin and the tip is cracked, it is difficult for the board to be burdened and cracking is unlikely to occur. SUS410 Stainless steel is resistant to rust. For wood.

High quality and reliable course thread holding power 5 times more than nails. High quality with peace of mind for standard course threads.

By changing the cross hole to a square hole, bit chipping, hole crushing, and screw fall are reduced, and driving is stable.

Even with an 18V impact driver, it is hard to break the screw. Twist breaking torque is improved by about 25% compared to the manufacturer's normal product. The screwing speed is amazing. The cutting speed is improved by starting to cut with a screw thread rising from the tip. WAX on the surf... Read More

The most common woodworking screw for working with power tools, with long thread spacing (coarse) and deep screw grooves. Since the trumpet head has a large ground contact surface when buried in wood, it firmly fixes the wood to each other and makes it difficult for the head to be buried. Austeni... Read More