All Category

Screws

Screws are used to bond and fix parts to be tightened. It is generally a round bar or a pointed cone. A groove is engraved on the side of the screw, and it is distinguished whether the screw thread is inside or outside. Screws with bolts on the outside are called “male threads”, and screws with nuts on the inside are called “female threads”. Screws are sometimes used for decorative purposes to improve aesthetics, but bolts and nuts are used for practical purposes to make tightening stronger.
View : Grid List
Filter

Items 1 - 40 of 12347

Set Ascending Direction
  1. (+) Countersunk Head Machine Screw (Stainless Steel)
    Osaka Spirit (+) Countersunk Head Machine Screw (Stainless Steel)
    Socket Shape  Cross hole  Head Shape  Plate  Material / Finish  Stainless steel (SUSXM7) 
    Rating:
    93%
    from ₱394.31
    Min. 2 days
  2. (+) Pan Head Machine Screw (Stainless Steel)
    Osaka Spirit (+) Pan Head Machine Screw (Stainless Steel)
    Socket Shape  Cross hole  Head Shape  Pan head  Material / Finish  Stainless steel 
    Rating:
    92%
    from ₱196.95
    Min. 2 days
  3. (+) Truss head tapping screw (stainless steel)
    Osaka Spirit (+) Truss head tapping screw (stainless steel)
    Socket Shape  Cross hole  Material / Finish  Stainless steel  Head Shape  Truss  Specification  ± 0.8mm tolerance 
    Rating:
    91%
    from ₱233.95
    Min. 2 days
  4. (+) Truss Head Tapping Screw (Iron / Unichrome)
    Osaka Spirit (+) Truss Head Tapping Screw (Iron / Unichrome)
    Socket Shape  Cross hole  Material / Finish  Iron / Unichrome  Head Shape  Truss  Surface Treatment  Unichrome 
    Rating:
    90%
    from ₱287.41
    Min. 2 days
  5. (+) Pan head drill screw (stainless steel)
    Osaka Spirit (+) Pan head drill screw (stainless steel)
    It is a small-lot sale in pack units.
    Size of Cross Recess  #2  Socket Shape  Cross hole  Head Shape  Nabe head  Material / Finish  Stainless steel 
    Rating:
    85%
    from ₱534.11
    Min. 2 days
  6. (+) Flat Head Machine Screw (Iron / Unichrome)
    Osaka Spirit (+) Flat Head Machine Screw (Iron / Unichrome)
    Socket Shape  Cross hole  Head Shape  Plate  Surface Treatment  Unichrome 
    Rating:
    94%
    from ₱258.62
    Min. 2 days
  7. (+) Pan head drill screw (iron / unichrome)
    Osaka Spirit (+) Pan head drill screw (iron / unichrome)
    It is a small-lot sale in pack units.
    Size of Cross Recess  #2  Socket Shape  Cross hole  Material / Finish  Iron / Unichrome  Head Shape  Nabe head  Surface Treatment  Unichrome 
    Rating:
    87%
    from ₱233.95
    Min. 2 days
  8. (+) Countersunk Tapping Screw (Stainless Steel)
    Osaka Spirit (+) Countersunk Tapping Screw (Stainless Steel)
    Socket Shape  Cross hole  Head Shape  Plate  Material  Stainless steel 
    Rating:
    83%
    from ₱279.18
    Min. 2 days
  9. (+) Countersunk Small Head Machine Screw (Stainless Steel) (Packaged)
    Osaka Spirit (+) Countersunk Small Head Machine Screw (Stainless Steel) (Packaged)
    Socket Shape  Cross hole  Head Shape  Small plate head  Material  Stainless steel (SUSXM7) 
    Rating:
    91%
    from ₱176.39
    Min. 2 days
  10. (+) Pan Head Tapping Screw (Stainless Steel)
    Osaka Spirit (+) Pan Head Tapping Screw (Stainless Steel)
    Socket Shape  Cross hole  Head Shape  Pan head  Material / Finish  Stainless steel (SUS304) 
    Rating:
    91%
    from ₱287.41
    Min. 2 days
  11. Stainless Steel Countersunk Screw
    No Brand Stainless Steel Countersunk Screw
    Screw Length (mm)  About 2/3 from under the neck  Material / Finish  Stainless steel 
    Rating:
    81%
    from ₱492.99
    Min. 2 days
  12. (+) Pan Head Screw P3 (with SW, W) (Iron / Chromated)
    Osaka Spirit (+) Pan Head Screw P3 (with SW, W) (Iron / Chromated)
    Size of Cross Recess  #2  Surface Treatment  Chromate  Socket Shape  Cross hole  Material / Finish  Iron / chromate  Type  P=3 (SW + JIS built-in)  Screw Classification 1  Pan head assembly  Head Shape  Pan head assembly  Screw Classification 2  With flat and spring washers 
    Rating:
    86%
    from ₱270.96
    Min. 2 days
  13. Unichrome Jack Point Modulus Screw
    YAMAHIRO Unichrome Jack Point Modulus Screw
    Specification  Chrome-free  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Iron  Type  Jack point mod truss  Head Shape  Modras  Surface Treatment  Trivalent unichrome  Finish  Trivalent unichrome 
    Rating:
    93%
    from ₱821.92
    Min. 2 days
  14. (+) Truss Head Tapping Screw Grade 1 Type A (Iron / Zinc Black) (Small Box)
    Osaka Spirit (+) Truss Head Tapping Screw Grade 1 Type A (Iron / Zinc Black) (Small Box)
    Socket Shape  Cross hole  Material  Iron  Head Shape  Truss  Surface Treatment  Zinc black 
    Rating:
    88%
    from ₱1,397.56
    Min. 2 days
  15. Woodworking screw for interior
    TRUSCO Woodworking screw for interior
    Holding power, 5 times that of nails. Uses two threads for high and low threads. Prevents plate cracking due to sharp tip cracking. Mainly used for wood. Ideal for interior decoration.
    Surface Treatment  Chromate plating  Specification  Double thread  Bit No.  No.2  Material (Main Unit)  Steel (SAE1018) 
    Rating:
    70%
    from ₱320.30
    Min. 2 days
  16. Sara Tapping Screw [Stainless Steel]
    ESCO Sara Tapping Screw [Stainless Steel]
    Head Shape  (+) Head  Socket Shape  Cross hole  Material  Stainless steel 
    Rating:
    100%
    from ₱299.74
    Min. 2 days
  17. (+) Pan head built-in P4 (SW, with small W) (iron / chromate)
    Osaka Spirit (+) Pan head built-in P4 (SW, with small W) (iron / chromate)
    Size of Cross Recess  #2  Surface Treatment  Chromate  Socket Shape  Cross hole  Material / Finish  Iron / chromate  Type  P = 4 (SW + JIS small W built-in)  Head Shape  Pan head assembly  Screw Classification 1  Pan head assembly  Screw Classification 2  With small flat and spring washers 
    Rating:
    84%
    from ₱270.96
    Min. 2 days
  18. (+) Flat head screw (polycarbonate (transparent))
    Osaka Spirit (+) Flat head screw (polycarbonate (transparent))
    Socket Shape  Cross hole  Head Shape  Plate  Material  Polycarbonate  Color  Transparent 
    Rating:
    80%
    from ₱11.92
    Min. 2 days
  19. (+) Super low head tapping screw Type 1 A (Stainless steel) (Packed product)
    Osaka Spirit (+) Super low head tapping screw Type 1 A (Stainless steel) (Packed product)
    Socket Shape  Cross hole  Material  Stainless steel  Head Shape  Ultra low head 
    Rating:
    80%
    from ₱233.95
    Min. 2 days
  20. Ultra low head tapping screw
    TRUSCO Ultra low head tapping screw
    Since the height of the head is thin, the mounting surface can be flattened. It is suitable for places where dish fir cannot be made or where the thickness is an obstacle.
    Head Shape  Very low head  Suitable Screwdriver 
    Rating:
    90%
    from ₱451.87
    Min. 2 days
  21. Tornado Point Truss Trivalent Unichrome
    YAMAHIRO Tornado Point Truss Trivalent Unichrome
    Dimensions p (mm)  0.7  Dimension H (mm)  1.6  Dimension d (mm)  3.9  Dimension D (mm)  8.0  Type  Jack point truss  RoHS directive (corresponding to 10 substances)  Correspondence  Dimension S (mm)  Fully threaded  Nominal Size of Screw  M4  Surface Treatment  Trivalent unichrome  Head Shape  Truss 
    Rating:
    100%
    from ₱1,767.61
    Min. 2 days
  22. 4 Mark Small Hexagon Upset SP = 3 (SPAK + JISW Built-in) (Iron / Chromate) (Small Boxes)
    Osaka Spirit 4 Mark Small Hexagon Upset SP = 3 (SPAK + JISW Built-in) (Iron / Chromate) (Small Boxes)
    Surface Treatment  Chromate  Head Shape  Hex upset built-in  Material  Iron  Thread Type  Meter  Type  SP = 3 (SPAK + JISW built-in) 
    Rating:
    100%
    from ₱1,150.86
    Min. 2 days
  23. Pan head tapping screw (trivalent white)
    TRUSCO Pan head tapping screw (trivalent white)
    A trivalent chromate product with less environmental impact. A screw for thin steel sheets that can be fastened only with a pilot hole without using taps or nuts. * The screw pilot hole size is when the base material is 1.2 mm thick.
    Socket Shape  Cross hole  Material / Finish  Iron (SWCH) / Trivalent white  Head Shape  Pan head  Surface Treatment  Trivalent chromate 
    Rating:
    100%
    from ₱398.42
    Min. 2 days
  24. Tap type (+) B type pan (SUSXM7) (Packed product)
    Osaka Spirit Tap type (+) B type pan (SUSXM7) (Packed product)
    Socket Shape  Cross hole  Head Shape  Pan head  Material  Stainless steel 
    Rating:
    95%
    from ₱233.95
    Min. 2 days
  25. Screw with sheet metal packing Stainless steel (SUS410) Head color
    Wakai Sangyo Screw with sheet metal packing Stainless steel (SUS410) Head color
    High-grade polyofylene-based packing makes it highly durable and waterproof. The screw head has a special shape that wraps the packing. A wide range of color products and make-up. The special shape of the tip reduces cracks in the base material.
    Head Diameter (Φmm)  10  Length (mm)  27  Thread Diameter (mm)  4.3  Nominal Size of Screw  M4.3  Material  Stainless steel 
    Rating:
    60%
    from ₱6,163.40
    Min. 2 days
  26. Tap Type (+) S Type Truss (SUS410) (Packed)
    Osaka Spirit Tap Type (+) S Type Truss (SUS410) (Packed)
    Size of Cross Recess  Dimension m (mm)  4.7  Socket Shape  Cross hole  Material  SUS410  Head Shape  Truss 
    from ₱233.95
    Min. 2 days
  27. (+) No. 0 class 3 pan head screw (stainless steel) (small box)
    Osaka Spirit (+) No. 0 class 3 pan head screw (stainless steel) (small box)
    Socket Shape  Cross hole  Head Shape  Pan head  Material  Stainless steel 
    from ₱821.92
    Min. 3 days
  28. Pan head screw (with chromate / small round washer)
    TRUSCO Pan head screw (with chromate / small round washer)
    You can save the trouble of setting washers and spring washers.
    Socket Shape  Cross hole  Material / Finish  Iron (SWCH) / chromate strength 4.8  JIS Standard  JIS-B1188 standard product  Type  P = 4 (SW + JIS small W built-in)  Head Shape  Pan head assembly 
    from ₱402.53
    Min. 2 days
  29. Screw nut set (stainless steel)
    ESCO Screw nut set (stainless steel)
    Material  Stainless steel 
    from ₱5,752.23
    Min. 2 days
  30. (-) Countersunk Head Machine Screw (Iron / Unichrome) Small Box
    Osaka Spirit (-) Countersunk Head Machine Screw (Iron / Unichrome) Small Box
    Material  Iron  Head Shape  Plate  Socket Shape  Slotted  Surface Treatment  Unichrome 
    from ₱1,603.14
    Min. 2 days
  31. Decava
    Wakai Sangyo Decava
    The wide-angle blade (160 ° cut) at the tip of the screw sharply cuts fibers of hard and soft materials. It has a good bite and can be driven and tightened without difficulty. Achieves excellent functionality and workability that prevents wood cracking and eliminates head skipping.
    Material / Processing  Chromate / Plating treatment 
    from ₱2,795.53
    Min. 2 days
  32. 4-mark small hexagon upset SP = 2 (SPAK built-in) (iron / chromate) (small box)
    Osaka Spirit 4-mark small hexagon upset SP = 2 (SPAK built-in) (iron / chromate) (small box)
    Surface Treatment  Chromate  Head Shape  Hex upset built-in  Material  Iron  Thread Type  Meter  Type  SP = 2 (SPAK built-in) 
    Rating:
    100%
    from ₱1,150.86
    Min. 3 days
  33. Sems pan head machine screw SG
    OHSATO Sems pan head machine screw SG
    RoHS directive (corresponding to 10 substances)  Correspondence  Socket Shape  Cross hole  Head Shape  Pan head 
    from ₱98.27
    Min. 3 days
  34. Dry wall (iron / unichrome)
    No Brand Dry wall (iron / unichrome)
    Material / Finish  Iron / Unichrome 
    Rating:
    100%
    from ₱328.52
    Min. 4 days
  35. Tap type (+) P type pan head washer head (SUSXM7) (packed product)
    Osaka Spirit Tap type (+) P type pan head washer head (SUSXM7) (packed product)
    Dimension D (mm)  (Maximum) 3.04 / (minimum) 2.92  Dimension C (mm)  0.6  Size of Cross Recess  Dimension k (mm)  2.2  Pitch (mountain / size)  20  Dimension dk (mm)  5.5  Dimension dc (mm)  Socket Shape  Cross hole  Nominal Size of Screw  M3  Head Shape  Nabe washer head  Material  Stainless steel 
    from ₱233.95
    Min. 3 days
  36. M5x25mm pan head machine screw [stainless steel]
    ESCO M5x25mm pan head machine screw [stainless steel]
    Socket Shape  Cross hole  Esco Part No.  EA949SJ-53  Head Shape  Pan head  Material  Stainless steel 
    from ₱299.74
    Min. 4 days
  37. (+) All-purpose screw thin washer (iron / Ruspert silver) (small box)
    Osaka Spirit (+) All-purpose screw thin washer (iron / Ruspert silver) (small box)
    Thread Pitch (mm)  0.7  Dimension H (mm)  2.7  Dimension d (mm)  4.2  Dimension D (mm)  9.75  Material  Iron  Nominal Size of Screw  M4  Surface Treatment  Ruspert Silver 
    from ₱1,150.86
    Min. 2 days
  38. (+) TRUSTAPPIN SCREW TYPE 1 A (Stainless Steel / SC-4) (Small Box)
    Osaka Spirit (+) TRUSTAPPIN SCREW TYPE 1 A (Stainless Steel / SC-4) (Small Box)
    Socket Shape  Cross hole  Surface Treatment  SC-4  Material  Stainless steel  Head Shape  Truss 
    Rating:
    80%
    from ₱1,191.97
    Min. 2 days
  39. (+) Countersunk screw (PEEK)
    Osaka Spirit (+) Countersunk screw (PEEK)
    Socket Shape  Cross hole  Material  PEEK (peak)  Head Shape  Plate 
    from ₱114.72
    Min. 6 days
  40. (+) TP machine screw (iron / chromate) (small box)
    Osaka Spirit (+) TP machine screw (iron / chromate) (small box)
    Surface Treatment  Chromate  Socket Shape  Cross hole  Material  Iron 
    from ₱1,890.96
    Min. 3 days
View : Grid List
Filter

Items 1 - 40 of 12347

Set Ascending Direction