All Category

Hollow Wall Anchors

There are Amera hangers and IT hangers for hollow wall anchors. IT hangers can stabilize the holding force during penetration. Since it can be installed with the fixtures installed, there is no risk of damage. Can be used on floors and walls, such as rain gutters, handrails and brackets. Amera hangers have a shorter roll plate than IT hangers, so they can be installed inside extruded cement boards. Especially recommended for mounting on hollow walls.
View : Grid List
Filter

Items 1 - 40 of 55

Set Ascending Direction
  1. IT hanger
    NEGUROSU DENKO IT hanger
    A convenient hanger that can be attached from one side with a single touch. * Strength is the breaking strength of the rotating plate due to the hanger body and the fastening part of the rotating plate. It may be different if the wall surface to be constructed is soft.
    Rating:
    93%
    from ₱110.60
    Min. 2 days
  2. IT hanger IT-S type (stainless steel)
    Osaka Spirit IT hanger IT-S type (stainless steel)
    * Nuts are not included
    Material  Stainless steel 
    Rating:
    88%
    from ₱201.06
    Min. 2 days
  3. IT Hanger ITW-S Type (Stainless Steel)
    Osaka Spirit IT Hanger ITW-S Type (Stainless Steel)
    Material  Stainless steel 
    Rating:
    90%
    from ₱201.06
    Min. 2 days
  4. IT hanger
    TRUSCO IT hanger
    Hollow wall fastener. The screw body and roll plate have the same diameter, so it can be installed with the fixture installed. Demonstrates stable holding power.
    Material (Main Unit)  Steel  Surface Treatment  Trivalent chromate plating 
    Rating:
    92%
    from ₱739.69
    Min. 2 days
  5. IT hanger IT type (iron / 3valent white) (small box)
    Osaka Spirit IT hanger IT type (iron / 3valent white) (small box)
    Material  Iron  Surface Treatment  Trivalent white 
    Rating:
    100%
    from ₱2,877.76
    Min. 2 days
  6. ITU hanger
    NEGUROSU DENKO ITU hanger
    Since it is easy to remove, it is ideal for supporting and fixing objects that are expected to change positions and temporary objects. * Strength is the breaking strength of the rotating plate due to the hanger body and the fastening part of the rotating plate. It may be different if the wall sur... Read More
    Suitable Drill Diameter (mm)  Φ9  Thread Size  M8  Minimum hollow width (mm)  30  Tensile Strength N (kgf)  588(60) 
    Rating:
    100%
    from ₱110.60
    Min. 2 days
  7. T-lock TLS type (stainless steel)
    UNIKA T-lock TLS type (stainless steel)
    Material  Stainless steel 
    Rating:
    100%
    from ₱196.95
    Min. 2 days
  8. Anchor IT hanger for hollow wall (fixed with scissors)
    TRUSCO Anchor IT hanger for hollow wall (fixed with scissors)
    The screw body and roll plate have the same diameter, so it can be installed with the fixture installed. For hollow walls. Bracket fastening. For hollow walls. * The maximum tensile load is the value at the time of plate yield strength.
    Material  Stainless steel (SUS304 / SUSXM7) 
    from ₱945.27
    Min. 2 days
  9. Pat anchor
    DENSAN Pat anchor
    For attaching appliances and pipes to hollow walls. Can be installed without damaging the lightweight steel studs and walls of the building interior. Insert it horizontally from the pilot hole, and the main body on the back side of the wall stands vertically, The wall surface and the attachment c... Read More
    Diameter (Φmm)  (Washer) 14  Maximum pulling strength N (kgf)  245(25kgf)  Quantity  10  A×B×C(mm)  Body size: 7 x 8 x 39  Included Accessories  Pan head machine screw  Clamping Thickness (mm)  (Wall + mounting): 15 or less  Bolt  M4×40mm  Drill hole diameter (mm)  Φ12 
    from ₱821.92
    Min. 2 days
  10. Hollow wall anchor IT hanger (for ALC, scissors fixed)
    SANKO TECHNO Hollow wall anchor IT hanger (for ALC, scissors fixed)
    Stable holding power can be obtained by penetrating construction. Tightening penetration construction does not damage the ALC panel. Tightening penetration construction does not damage the ALC panel. Good workability due to the spring effect. Can be installed on walls and floors. For ALC panels. ... Read More
    Grip Range (mm)  1~10  Suitable Material  ALC panel  Type  Male thread type  Included Accessories  With stainless nut and washer 
    Rating:
    100%
    from ₱4,929.90
    Min. 2 days
  11. Pat anchor (without bolt)
    DENSAN Pat anchor (without bolt)
    Can be installed without damaging the lightweight steel studs in the building interior or the wall surface for mounting fixtures and pipes on the hollow wall surface. can do. Threaded rods are OK When using a threaded rod (commercially available) ・ Attachable thickness (wall + attachment): 50 mm... Read More
    Maximum pullout strength KN (kgf)  1.08(110)  Set Contents  Pat anchor, washer / 10 each  Drill Diameter (Φmm)  Prepared hole: 22  Material  Steel 
    from ₱1,233.09
    Min. 2 days
  12. IT hanger IT-S type (stainless steel) (small box)
    Osaka Spirit IT hanger IT-S type (stainless steel) (small box)
    Material  Stainless steel 
    Rating:
    80%
    from ₱6,163.40
    Min. 2 days
  13. King cup toggle
    DENSAN King cup toggle
    Bolt strength lives on (heavyweight hollow anchor) For all hollow concrete etc. (fastening from one side is OK) Strong anchor for hinge-bolt system Even fragile (at anchor) wall materials such as ALC boards can be securely fastened. Also, unlike the conventional method, there is no need for a bac... Read More
    from ₱534.11
    Min. 2 days
  14. Amera hanger ITA-S type (stainless steel)
    SANKO TECHNO Amera hanger ITA-S type (stainless steel)
    The roll plate part has a double structure, demonstrating strong holding power Mounting on hollow walls such as handrails / brackets / distribution boards / bulletin boards
    Grip Range (mm)  12~20  Tightening Torque (Nm)  15  Drill Diameter (Φmm)  15  Thread Length l (mm)  23  Plate length C (mm)  30  Overall Length L (mm)  52  Nominal Size of Screw  M10  Material  Stainless steel 
    Rating:
    90%
    from ₱398.42
    Min. 2 days
  15. Pat anchor
    DENSAN Pat anchor
    It can be installed without damaging the lightweight steel studs in the building interior or the wall surface. By inserting it horizontally from the pilot hole, the main body on the back side of the wall stands vertically and the wall surface and the attachment can be firmly fixed. Water supply /... Read More
    Drill Diameter (Φmm)  14 (prepared hole)  Clamping Thickness (mm)  25 or less (wall + attachment)  Maximum pulling strength N (kgf)  441(45)  Dimensions, A x B x C (mm)  9×11×55  Material  Steel  Washer outer diameter (mm)  Φ19.5 
    from ₱986.39
    Min. 2 days
  16. Pat anchor
    DENSAN Pat anchor
    Can be installed without damaging the lightweight steel studs in the building interior or the wall surface for mounting fixtures and pipes on the hollow wall surface. can do. Threaded rods are OK Water supply / drainage / gas work: Sanitary fixtures / gas oil pipe pipe support, etc. Air condition... Read More
    Maximum pullout strength KN (kgf)  1.05(110)  Drill Diameter (Φmm)  22 (prepared hole)  Material  Steel 
    from ₱1,849.84
    Min. 2 days
  17. Pat anchor
    DENSAN Pat anchor
    It can be installed without damaging the lightweight steel studs in the building interior or the wall surface. By inserting it horizontally from the pilot hole, the main body on the back side of the wall stands vertically and the wall surface and the attachment can be firmly fixed. Water supply /... Read More
    Drill Diameter (Φmm)  12 (prepared hole)  Clamping Thickness (mm)  20 or less (wall + attachment)  Maximum pulling strength N (kgf)  343(35)  Dimensions, A x B x C (mm)  7.5×9×47  Material  Steel  Washer outer diameter (mm)  Φ17 
    from ₱821.92
    Min. 2 days
  18. Pat anchor
    DENSAN Pat anchor
    It can be installed without damaging the lightweight steel studs in the building interior or the wall surface. By inserting it horizontally from the pilot hole, the main body on the back side of the wall stands vertically and the wall surface and the attachment can be firmly fixed. Water supply /... Read More
    Dimensions, A x B x C (mm)  12×14.5×60  Drill Diameter (Φmm)  20 (prepared hole)  Clamping Thickness (mm)  30 or less (wall + attachment)  Maximum pulling strength N (kgf)  588(60)  Material  Steel  Washer outer diameter (mm)  Φ26 
    from ₱1,191.97
    Min. 2 days
  19. IT hanger ITL-W type steel ALC metric screw
    SANKO TECHNO IT hanger ITL-W type steel ALC metric screw
    Stable holding power can be obtained by penetrating construction. The ALC panel will not be damaged by the tightening penetration construction. You can fine-tune the bolt embedding depth. A spring is set to speed up the construction. For ALC panels. For attaching rain gutters, stopping hanging ho... Read More
    Suitable Material  ALC panel  Material  Steel  Surface Treatment  Trivalent chromate processing 
    Rating:
    100%
    from ₱4,929.90
    Min. 2 days
  20. IT hanger ITW-S type (stainless steel) (small box)
    Osaka Spirit IT hanger ITW-S type (stainless steel) (small box)
    Material  Stainless steel 
    Rating:
    100%
    from ₱6,163.40
    Min. 3 days
  21. IT hanger ITU type (iron / 3valent white) (small box)
    Osaka Spirit IT hanger ITU type (iron / 3valent white) (small box)
    Plate length C (mm)  30  Tightening Torque (Nm)  5~6  Drill Diameter (Φmm)  Material  Iron  Nominal Size of Screw  M8  Surface Treatment  Trivalent white 
    from ₱3,494.51
    Min. 3 days
  22. Amera hanger ITA type steel
    SANKO TECHNO Amera hanger ITA type steel
    The roll play part has a double structure and demonstrates strong holding power. The roll plate is shorter than the normal IT hanger type, and it can be installed easily even inside the extruded cement plate. The roll plate has a double structure, providing strong holding power. Since the roll pl... Read More
    Required hollow width (mm)  (At the time of construction) 26  Suitable Door Thickness to Mount (mm)  12~20  Suitable Thickness of Workpiece (mm)  12~20  Grip Range (mm)  12~20  Pilot Hole Diameter (Φmm)  13.5  Plate Length (mm)  24  Screw Length (mm)  30  Mass (g)  37.6  Maximum Tensile Load (kN)  4.0  Trusco Part No.  494-1403  Length (mm)  50  Specification  Boxed  Nominal Size of Screw  M10  Set Contents  Nut, washer, spring washer 
    from ₱6,574.57
    Min. 2 days
  23. ITL hanger
    NEGUROSU DENKO ITL hanger
    The exposed support bolt does not come off due to the force of the spring even if it is pushed to the wall surface. When the mounting holes on the board and the hanger are aligned, the support bolts will return to their original positions, allowing smooth fixing of large boards. Can be used for A... Read More
    Thread Size  M10  Minimum hollow width (mm)  57  Tensile Strength N (kgf)  980(100)  Suitable Drill Diameter (mm)  Φ17 
    from ₱275.07
    Min. 2 days
  24. IT hanger ITW type Stainless steel metric screw
    SANKO TECHNO IT hanger ITW type Stainless steel metric screw
    from ₱5,752.23
    Min. 6 days
  25. Amera hanger ITA type Stainless steel
    SANKO TECHNO Amera hanger ITA type Stainless steel
    The roll play part has a double structure and demonstrates strong holding power. The roll plate is shorter than the normal IT hanger type, and it can be installed easily even inside the extruded cement plate. The roll plate has a double structure, providing strong holding power. Since the roll pl... Read More
    Required hollow width (mm)  (At the time of construction) 26  Grip Range (mm)  12~20  Suitable Door Thickness to Mount (mm)  12~20  Suitable Thickness of Workpiece (mm)  12~20  Pilot Hole Diameter (Φmm)  13.5  Plate Length (mm)  24  Screw Length (mm)  30  Mass (g)  39  Maximum Tensile Load (kN)  4.0  Trusco Part No.  494-1411  Length (mm)  50  Specification  Boxed  Nominal Size of Screw  M10  Set Contents  Nut, washer, spring washer 
    from ₱12,330.91
    Min. 32 days
  26. IT hanger IT type Steel pack
    SANKO TECHNO IT hanger IT type Steel pack
    Material  Steel 
    from ₱945.27
    Min. 3 days
  27. IT Hanger (ITL Type Male Thread (Stainless Steel / Plain)
    Osaka Spirit IT Hanger (ITL Type Male Thread (Stainless Steel / Plain)
    Surface Treatment  Fabric (or standard)  Material  Stainless steel (303, 304, XM7, etc.) 
    from ₱904.16
    Min. 4 days
  28. ALC anchor IT hanger (scissors fixed type) male thread type steel
    SANKO ALC anchor IT hanger (scissors fixed type) male thread type steel
    Maximum Thickness to Fix (mm)  10  Length (mm)  110  Pilot Hole Diameter (Φmm)  17  Grip Range (mm)  1~10  Trusco Part No.  491-6573  Plate Length (mm)  55  Required hollow width (mm)  57  Maximum Tensile Load (kN)  6.4  Screw Length (mm)  79  Mass (g)  81.6  Nominal Size of Screw  M10  Included Accessories  Nut with seat 
    from ₱4,929.90
    Min. 2 days
  29. Amera Hanger ITA type (iron / 3valent white) (small box)
    Osaka Spirit Amera Hanger ITA type (iron / 3valent white) (small box)
    Grip Range (mm)  12~20  Tightening Torque (Nm)  15  Drill Diameter (Φmm)  15  Thread Length l (mm)  23  Plate length C (mm)  30  Overall Length L (mm)  50  Material  Iron  Nominal Size of Screw  M10  Surface Treatment  Trivalent white 
    from ₱6,574.57
    Min. 3 days
  30. Amera hanger ITA-S type (stainless steel) (small box)
    SANKO TECHNO Amera hanger ITA-S type (stainless steel) (small box)
    Grip Range (mm)  12~20  Tightening Torque (Nm)  15  Drill Diameter (Φmm)  15  Thread Length l (mm)  23  Plate length C (mm)  30  Mass (g)  42.1  Trusco Part No.  494-1438  Overall Length L (mm)  50  Nominal Size of Screw  M10  Material  Stainless steel 
    from ₱12,330.91
    Min. 32 days
  31. IT Hanger IT Type (Iron / Plain) (Small Box)
    Osaka Spirit IT Hanger IT Type (Iron / Plain) (Small Box)
    Grip Range (mm)  12~43  Plate length C (mm)  30  Thread Length l (mm)  45  Tightening Torque (Nm)  6.5  Overall Length L (mm)  65  Drill Diameter (Φmm)  Material  Iron  Nominal Size of Screw  M8  Surface Treatment  Phosphate 
    from ₱4,107.56
    Min. 4 days
  32. Pat anchor (without bolt)
    DENSAN Pat anchor (without bolt)
    Can be installed without damaging the lightweight steel studs in the building interior or the wall surface for mounting fixtures and pipes on the hollow wall surface. Insert horizontally from the pilot hole, the main body on the back side of the wall stands vertically, and the wall surface and th... Read More
    Drill Diameter (Φmm)  20  Tensile Strength (N)  588  Bolt (mm)  75 or more  Type  Hex bolt (without bolt)  Suitable Material  Hollow wall  Nominal Size of Screw  M8  Set Contents  Pat anchor washer  Mounting thickness (mm)  Wall + attachment: 30 or less  Diameter (Φmm)  Washer: 26 
    from ₱1,068.62
    Min. 5 days
  33. Bush bottle hanger
    Kokusai Bush bottle hanger
    One-touch construction for both the main body and all screws! Significant time reduction! All screws are completely fixed by inserting them straight and turning them a little (less than 1 turn)! No special tools (all screw cutters, all screwdrivers) required! All screws that are difficult to inst... Read More
    from ₱28,777.61
    Min. 5 days
  34. Pat anchor (without screws)
    DENSAN Pat anchor (without screws)
    Can be installed without damaging the lightweight steel studs in the building interior or the wall surface for mounting fixtures and pipes on the hollow wall surface. Insert horizontally from the pilot hole, the main body on the back side of the wall stands vertically, and the wall surface and th... Read More
    Suitable Material  Hollow wall  Type  Pan head machine screw (without screw)  Set Contents  Pat anchor washer 
    from ₱780.81
    Min. 5 days
  35. IT hanger stainless steel
    SANKO TECHNO IT hanger stainless steel
    It can be attached by sandwiching it in the hollow part. Can be installed on walls and floors
    Material  Stainless steel 
    from ₱5,752.23
    Min. 5 days
  36. Spring hanger (green) (iron / chromate)
    Osaka Spirit Spring hanger (green) (iron / chromate)
    Surface Treatment  Chromate  Material  Iron (or standard)  Nominal Size of Screw  MSH-M1050 
    from ₱131.16
    Min. 4 days
  37. Amera Hanger (ITA-R / RS (Iron / Trivalent White)
    Osaka Spirit Amera Hanger (ITA-R / RS (Iron / Trivalent White)
    Material  Iron (or standard)  Nominal Size of Screw  MITA-1050R  Surface Treatment  Trivalent white 
    from ₱8,219.24
    Min. 4 days
  38. IT hanger (ITL type male thread (iron / trivalent white)
    Osaka Spirit IT hanger (ITL type male thread (iron / trivalent white)
    Material  Iron (or standard)  Surface Treatment  Trivalent white 
    from ₱4,518.73
    Min. 4 days
  39. Pat anchor (stainless steel)
    DENSAN Pat anchor (stainless steel)
    For mounting appliances and pipes on hollow walls Lightweight steel studs in building interiors for hollow walls and can be installed without damaging the wall surface. By inserting horizontally through a pilot hole, the main body on the back side of the wall stands vertically, and the wall surfa... Read More
    Drill Diameter (Φmm)  (Prepared hole): 22  Maximum pullout strength KN (kgf)  1.08(110)  Main Unit Dimensions (mm)  17×16.5×75  Washer outer diameter (mm)  36  Mass (g)  80  Material  Body, hexagon bolt, washer: SUS304  Bolt (mm)  W3/8×75 
    from ₱3,288.93
    Min. 5 days
  40. Pad anchor (stainless steel, no screws)
    DENSAN Pad anchor (stainless steel, no screws)
    For mounting appliances and pipes on hollow walls For hollow walls Lightweight steel studs in building interiors and can be installed without damaging the wall surface. By inserting horizontally from the pilot hole, the main body on the back side of the wall stands vertically, and the wall surfac... Read More
    Set Contents  (10 each) Pat anchor
    Washer 
    Drill Diameter (Φmm)  (Prepared hole): 12  Clamping Thickness (mm)  (Wall + mounting): 15 or less  Washer outer diameter (mm)  14  Maximum pulling strength N (kgf)  245(25)  Mass (g)  Main Unit Dimensions (mm)  7×7.5×39  Material  Body / washer: SUS304  Bolt (mm)  M4 x 40 or more (recommended) 
    from ₱986.39
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 55

Set Ascending Direction