All Category

Internal Cone Driving Anchors

View : Grid List
Filter

Items 1 - 40 of 90

Set Ascending Direction
  1. CT anchor CT type
    SANKO TECHNO CT anchor CT type
    The internal cone type allows uniform construction on the concrete surface (mortar surface) with little variation in construction, so it is excellent in aesthetics. Lighting equipment, plumbing, brackets, air conditioners, fire extinguishing equipment, signboards, various shelves, handrails, ramp... Read More
    Material  Steel  Surface Treatment  Trivalent chromate processing 
    Rating:
    96%
    from ₱821.92
    Min. 2 days
  2. Drop-In Anchor (Steel)
    A.Y. Fastener Drop-In Anchor (Steel)
    Since the outer diameter is small, the pilot hole has a small diameter and workability is improved. Since it has a built-in cone, it is easy to install upwards. Easy to confirm the completion of construction (using a dedicated driving rod). It is active in electrical construction work, plumbing w... Read More
    Material  Steel  Material (Outer Pipe)  Steel (SWRCH6A) 
    Rating:
    80%
    from ₱739.69
    Min. 2 days
  3. AY plug bolt AS type (stainless steel)
    A.Y. Fastener AY plug bolt AS type (stainless steel)
    The nut has a slope, and if you tighten the bolt, the outer cylinder will open from the back and will never come off. Since the inside of the outer cylinder is tapered, the entire outer cylinder sticks to the concrete. The material is uniform and the product accuracy is excellent. Installation an... Read More
    Suitable Material  Concrete, brick, tile, marble  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    95%
    from ₱2,055.43
    Min. 2 days
  4. Drop-in anchor (with bar) (steel)
    A.Y. Fastener Drop-in anchor (with bar) (steel)
    Internal cone driving type Since the outer diameter is small, the pilot hole has a small diameter, improving workability. Because it is a pin built-in type. Convenient upward construction You can confirm the completion of construction (using a dedicated driving rod) Can be installed through throu... Read More
    Material  Steel  Material (Outer Pipe)  Steel (SWRCH6A)  Thread Type  wit 
    Rating:
    90%
    from ₱1,438.68
    Min. 2 days
  5. GT anchor with anchor GT
    SANKO TECHNO GT anchor with anchor GT
    Since the plug is built-in, the pilot hole has a small diameter and is excellent in workability. The plug does not come off and the upward construction is smooth. Used for electrical installation work, plumbing work, air conditioning duct work, etc. Lighting equipment, plumbing, brackets, air con... Read More
    Outer Diameter (Φmm)  12.0  Drill Diameter (Φmm)  12.5  Maximum Proportional Load (kN)  9.8(1000)  RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel  Surface Treatment  Trivalent chromate processing  Suitable Size  W3/8  Thread Size  W3/8  Thread Type  wit 
    Rating:
    100%
    from ₱1,890.96
    Min. 2 days
  6. Drop-In Anchor (Stainless Steel)
    A.Y. Fastener Drop-In Anchor (Stainless Steel)
    Since the outer diameter is small, the pilot hole has a small diameter and workability is improved. Since it has a built-in cone, it is easy to install upwards. Easy to confirm the completion of construction (using a dedicated driving rod). It is active in electrical construction work, plumbing w... Read More
    Material  Stainless steel (SUS304) 
    Rating:
    83%
    from ₱2,754.41
    Min. 2 days
  7. Sea anchor SCT type (stainless steel)
    SANKO TECHNO Sea anchor SCT type (stainless steel)
    Material  Stainless steel 
    Rating:
    100%
    from ₱221.62
    Min. 2 days
  8. All Plug Bolt AS Type (Stainless Steel)
    SANKO TECHNO All Plug Bolt AS Type (Stainless Steel)
    Material  Stainless steel 
    Rating:
    100%
    from ₱196.95
    Min. 2 days
  9. GT anchor (steel) (pack)
    Osaka Spirit GT anchor (steel) (pack)
    Outer Diameter (Φmm)  12.0  Drill Diameter (Φmm)  12.5  Type  Inch screw  Material  Iron  Surface Treatment  Trivalent Chromate  Thread Size  W3/8  Thread Type  wit 
    Rating:
    100%
    from ₱225.73
    Min. 2 days
  10. Stainless steel GT anchor (packed product)
    Osaka Spirit Stainless steel GT anchor (packed product)
    Screw Length (mm)  12  Outer Diameter (Φmm)  12.0  Drill Diameter (Φmm)  12.5  Maximum Tensile Load kN (kgf)  12.7(1300)  Embedding Depth (mm)  30  Overall Length (mm)  30  Maximum proportional load kN (kgf)  9.3(950)  Type  Inch screw  Material  Stainless steel  Thread Size  W3/8  Thread Type  wit 
    Rating:
    100%
    from ₱1,562.03
    Min. 2 days
  11. AY plug bolt AS type (steel)
    A.Y. Fastener AY plug bolt AS type (steel)
    The nut has a slope, and if you tighten the bolt, the outer cylinder will open from the back and will never come off. Since the inside of the outer cylinder is tapered, the entire outer cylinder sticks to the concrete. The material is uniform and the product accuracy is excellent. Installation an... Read More
    Suitable Material  Concrete, brick, tile, marble  Material (Sleeve)  High purity zinc die cast  Surface Treatment  Trivalent Chromate  Material (Nut)  Zinc die cast 
    Rating:
    100%
    from ₱1,603.14
    Min. 2 days
  12. SDX stick for exclusive use of double X anchor
    KFC SDX stick for exclusive use of double X anchor
    Overall Length (mm)  155  Trusco Part No.  473-4009  Mass (g)  60  RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  DX-8、DX-10、DX-258、DX-38、DX-38P  Material  Steel, plastic 
    from ₱534.11
    Min. 2 days
  13. Seaty anchor (internal cone type, steel)
    TRUSCO Seaty anchor (internal cone type, steel)
    Internal cone type with little variation in construction. You can confirm the completion of construction by using the dedicated hand holder. For concrete. Used for electrical installation work, plumbing work, air conditioning duct work, light sky work, etc. * The maximum tensile load is the value... Read More
    Suitable Material  For concrete  Material  Steel  Surface Treatment  Trivalent chromate finish 
    Rating:
    90%
    from ₱365.53
    Min. 2 days
  14. Quick holder bit
    UNIKA Quick holder bit
    The drill bit designed exclusively for Unicon anchors has a stopper that stops at the specified pilot hole depth. The driving holder can be easily attached and detached with one touch by the О ring mechanism. Pilot hole construction and driving of Unicon anchor.
    Trusco Part No.  835-6908  2018 Trusco page  2 0499  Material  Blade: Carbide tip, Body: Alloy steel  Mass (g)  218 
    Rating:
    100%
    from ₱2,384.36
    Min. 2 days
  15. Ctee anchor stainless
    TRUSCO Ctee anchor stainless
    Material / Finish  Stainless steel (SUS304 equivalent) 
    from ₱1,438.68
    Min. 2 days
  16. Bolt Plug (Iron / Plain) (Small Box)
    UNIKA Bolt Plug (Iron / Plain) (Small Box)
    Material  Iron  Surface Treatment  Phosphate 
    from ₱1,973.19
    Min. 2 days
  17. Ctee anchor (steel) (pack)
    Osaka Spirit Ctee anchor (steel) (pack)
    Surface Treatment  Trivalent Chromate  Thread Type  wit 
    from ₱225.73
    Min. 2 days
  18. CRT anchor with bracket SGT (stainless steel)
    SANKO TECHNO CRT anchor with bracket SGT (stainless steel)
    * Maximum tensile load (KN) and proportional maximum load (KN) data are for concrete strength Fc21N / mm 2 (210kgf / cm 2 ).
    Screw Length (mm)  12  Outer Diameter (Φmm)  12.0  Drill Diameter (Φmm)  12.5  Maximum Tensile Load kN (kgf)  12.7(1300)  Overall Length (mm)  30  Embedding Depth (mm)  30  Maximum Proportional Load (kN)  9.3(950)  Material  Stainless steel  Thread Size  W3/8  Thread Type  wit 
    from ₱262.74
    Min. 2 days
  19. Stainless steel tee anchor (pack product)
    Osaka Spirit Stainless steel tee anchor (pack product)
    Type  Inch screw  Material  Stainless steel  Thread Type  wit 
    from ₱2,261.01
    Min. 2 days
  20. Sea anchor SCT type (stainless steel)
    SANKO TECHNO Sea anchor SCT type (stainless steel)
    Built-in cone type with little variation in strength. Ideal for construction sites that are made of stainless steel and require corrosion resistance. * Maximum tensile load (KN) and proportional maximum load (KN) data are for concrete strength Fc21N / mm 2 (210kgf / cm 2 ).
    Material  Stainless steel SUS304 
    from ₱9,452.74
    Min. 2 days
  21. Ctee anchor
    TRUSCO Ctee anchor
    Since the cone is built-in, there is little variation in construction. The completion of construction can be confirmed by using the dedicated hand holder. Construction is possible even with through holes. (GT type)
    Suitable Material  For concrete  Material (Main Unit)  Steel 
    from ₱328.52
    Min. 2 days
  22. Quick holder bit (for electric tools) Quick holder bit (with driving holder)
    UNIKA Quick holder bit (for electric tools) Quick holder bit (with driving holder)
    Drill Diameter (Φmm)  12.5  suitable anchor  UC-3040、UCS-3040  Material  Blade: Carbide tip, Body: Alloy steel  Overall Length (mm)  200  Mass (g)  234  Trusco Part No.  102-6632 
    from ₱3,288.93
    Min. 2 days
  23. Unicon anchor (stainless steel)
    UNIKA Unicon anchor (stainless steel)
    Material  Stainless steel 
    from ₱196.95
    Min. 2 days
  24. Unicon anchor UC short type
    UNIKA Unicon anchor UC short type
    A new mainstream female thread anchor with a large ground contact area and excellent pull-out strength. Since the outer diameter of the collar is smaller than the female screw diameter, the pilot hole diameter is small and workability is improved. In addition, upward construction is easy. Uses an... Read More
    Outer Diameter (Φmm)  12  Screw Length (mm)  12  Drilling diameter (mm)  12.5  Mass (g)  18  Thread Size  M10  Hole Depth (mm)  30  Overall Length (mm)  30  Embedding Depth (mm)  30 
    from ₱2,795.53
    Min. 2 days
  25. All plug bolt AS type (stainless steel) (small box)
    SANKO TECHNO All plug bolt AS type (stainless steel) (small box)
    Material  Stainless steel 
    from ₱4,107.56
    Min. 3 days
  26. Hawk head-in anchor HI type steel
    KFC Hawk head-in anchor HI type steel
    A compactly designed "female screw type" anchor with a built-in cone. Since the convex part of the dedicated driving rod is completely inserted into the main body at the time of driving, it serves as a guide for the completion of driving and construction management is easy. For installa... Read More
    Specification  Boxed  Suitable Material  For concrete  Material  Steel, electrogalvanized 
    from ₱986.39
    Min. 2 days
  27. Unicon Anchor UCS Type / W Thread (Stainless Steel)
    UNIKA Unicon Anchor UCS Type / W Thread (Stainless Steel)
    Abrasive Materials  Concrete, stone  Other  Internal cone driving type  Standard  JCAA certified products  Material  Stainless steel 
    from ₱4,111.26
    Min. 3 days
  28. Unicon anchor short stainless steel UCS-3030B
    UNIKA Unicon anchor short stainless steel UCS-3030B
    Since the outer diameter of the collar is smaller than the female screw diameter, the pilot hole diameter is small, workability is improved, and upward construction is easy. The internal cone is used to eliminate the loss of the cone during work and the removal after construction. Electrical cons... Read More
    Screw Length (mm)  12  Outer Diameter (Φmm)  12.0  Drill Diameter (Φmm)  12.5  Maximum Tensile Load (kN)  16.4  Mass (g)  19  Overall Length (mm)  30  Trusco Part No.  379-5845  Material  Stainless steel  Nominal Size of Screw  W3/8 
    from ₱9,452.74
    Min. 2 days
  29. Inner cone anchor type unicon anchor (with flange)
    UNIKA Inner cone anchor type unicon anchor (with flange)
    screw tightening torque (Nm)  10  Screw Length (mm)  12  Outer Diameter (mm)  12  Pilot Hole Diameter (Φmm)  12.5  Maximum Tensile Load (kN)  17.9  Overall Length (mm)  30  Trusco Part No.  859-9798  Mass (kg)  Material  Steel  Nominal Size of Screw  W3/8 
    from ₱9,452.74
    Min. 2 days
  30. Sea anchor CT type (iron / trivalent white) (packed product)
    SANKO TECHNO Sea anchor CT type (iron / trivalent white) (packed product)
    Dimension l (mm)  10  Overall Length L (mm)  25  Embedding Depth (mm)  25  Outer Diameter D (Φmm)  Drill Diameter (Φmm)  8.5  Material  Iron  Nominal Size of Screw  M6  Surface Treatment  Trivalent white 
    from ₱262.74
    Min. 2 days
  31. Poly Plug Bolts (Zinc Die-Cast / Stainless Steel Screw)
    A.Y. Fastener Poly Plug Bolts (Zinc Die-Cast / Stainless Steel Screw)
    Polycarbonate sleep has zero self-corrosion. The deeper nut ensures that the sleep is fixed. Easy to put on and take off bolts. M4 to M6 have washers Installation and hanging of fixtures on the ceiling, walls and floor of various buildings such as concrete, brick, tile and marble. It also has a w... Read More
    Material (Outer Pipe)  Polycarbonate  Material (Nut)  Zinc die cast  Material (Bolt)  Stainless steel (SUS304)  Suitable Material  Concrete, brick, tile, marble 
    from ₱1,644.26
    Min. 6 days
  32. Drive-in metal anchor EA2
    Fischer Drive-in metal anchor EA2
    A versatile internal cone driving type female screw anchor. By combining a hammer and a special driving tool (EHS Plus setting tool), after anchoring and expansion, it is engraved on the main body collar and the completion of construction can be easily confirmed. For concrete and stone materials.
    2018 Trusco page  2 0501 
    from ₱1,233.09
    Min. 2 days
  33. Drop-in anchor (with hook) (made of stainless steel)
    A.Y. Fastener Drop-in anchor (with hook) (made of stainless steel)
    Since the outer diameter is small, the pilot hole has a small diameter and workability is improved. Since it has a built-in cone, it is easy to install upwards. Easy to confirm the completion of construction (using a dedicated driving rod). Can be installed through through holes. It is active in ... Read More
    Screw Length (mm)  11  Outer Diameter (Φmm)  12  Drill Diameter (Φmm)  12.5  Tensile Strength (kN)  15  Overall Length (mm)  30  Material (Outer Pipe)  Stainless steel (SUS304)  Material  Stainless steel (SUS304)  Thread Size  W3/8 
    from ₱3,535.63
    Min. 2 days
  34. Machine holder for seat anchor (for electric tools)
    SANKO Machine holder for seat anchor (for electric tools)
    Mass (g)  110  Overall Length (mm)  145  Trusco Part No.  309-5304  Material  Steel  Suitable Screw  W3/8 
    from ₱1,068.62
    Min. 2 days
  35. All plug bolt AS type (iron) (small box)
    SANKO TECHNO All plug bolt AS type (iron) (small box)
    Material  Iron 
    from ₱3,288.93
    Min. 4 days
  36. Driving rod long for unicon anchor SD-30S × 500
    UNIKA Driving rod long for unicon anchor SD-30S × 500
    A driving rod for Unicon anchors. Attached to a lightweight hammer drill and used in fishing mode. Driving Unicon Anchor
    Material  Alloy steel  Mass (g)  445  Overall Length (mm)  500  Specification  Plastic tube  suitable anchor  UC-3030B、UCS-3030B  Shank  SDS type  Trusco Part No.  749-9663 
    from ₱1,603.14
    Min. 4 days
  37. CT-H type hand holder for seat anchor
    SANKO TECHNO CT-H type hand holder for seat anchor
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from ₱1,233.09
    Min. 6 days
  38. Quick holder bit (for electric tools) Quick bit (drill only)
    UNIKA Quick holder bit (for electric tools) Quick bit (drill only)
    Mass (g)  134  Drill Diameter (Φmm)  12.5  Trusco Part No.  102-6634  suitable anchor  UC-3040、UCS-3040  Overall Length (mm)  160  Material  Blade: Carbide tip, Body: Alloy steel 
    from ₱2,055.43
    Min. 2 days
  39. Poly plug bolt (Zinc die-cast / Trivalent screw)
    A.Y. Fastener Poly plug bolt (Zinc die-cast / Trivalent screw)
    Polycarbonate sleep has zero self-corrosion. The deeper nut ensures that the sleep is fixed. Easy to put on and take off bolts. Installation and hanging of fixtures on the ceiling, walls and floor of various buildings such as concrete, brick, tile and marble. It also has a wide range of applicati... Read More
    Material (Nut)  Zinc die cast  Suitable Material  Concrete, brick, tile, marble  Material (Bolt)  Steel (trivalent chromate treatment)  Material (Outer Pipe)  Polycarbonate 
    from ₱1,109.74
    Min. 6 days
  40. Unicon anchor UC type, M thread (chromate treatment)
    UNIKA Unicon anchor UC type, M thread (chromate treatment)
    Outer Diameter (mm)  10.0  Pilot Hole Diameter (Φmm)  10.5  Screw Length (mm)  13  Overall Length (mm)  30  Embedding Depth (mm)  30  Surface Treatment  Chromate  Abrasive Materials  Concrete, stone  Other  Internal cone driving type  Standard  JCAA certified products  Thread Size  M8 
    from ₱1,520.91
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 90

Set Ascending Direction