All Category

Core Rod Driving Anchors

A core rod anchor is an anchor bolt that can be installed directly from the top of the attachment. When drilling a hole in concrete, etc., removing the dust inside and then driving the anchor core rod inserted with a hammer, the lower part expands and bites into the outer periphery, fixing the body. Since it can be installed later, it can be installed after the position of the attachment is determined. There is also a type that shows the completion of core rod driving at a glance, making work management easy. Since all products are available in various lengths and diameters, various selections are possible depending on the installation location and objects.
View : Grid List
Filter

Items 1 - 40 of 167

Set Ascending Direction
  1. Anchor C type
    MonotaRO Anchor C type
    Can be installed from above the attachment Mechanical equipment work, etc. * Do not use for anything other than its intended purpose.
    Finish  Electrogalvanized  Material  Steel 
    Rating:
    93%
    from ₱821.92
    Min. 2 days
  2. C Type High Anchor (Steel)
    Sunrise C Type High Anchor (Steel)
    It is sold as a single piece made of steel. For concrete * The total length does not include the length of the pin.
    Suitable Material  For concrete  Material  Steel  Surface Treatment  Trivalent Chromate 
    Rating:
    88%
    from ₱53.04
    Min. 2 days
  3. Drive Anchor (C Type)
    SANKO TECHNO Drive Anchor (C Type)
    Easy construction by simply driving in the core rod You can see at a glance the completion of construction, and you can directly construct from the top of the attachment that can be managed. The diameter of the main body and the nominal diameter of the screw are the same. Hardware, chairs, plumbi... Read More
    Type  C type  Material  Steel  Surface Treatment  Trivalent chromate processing 
    Rating:
    93%
    from ₱1,315.32
    Min. 2 days
  4. Anchor C type Stainless steel
    MonotaRO Anchor C type Stainless steel
    Can be installed from above the attachment Mechanical equipment work, etc. * Do not use for anything other than its intended purpose.
    Material  Stainless steel 
    Rating:
    96%
    from ₱2,014.31
    Min. 2 days
  5. Screw Anchor (Steel) (Packaged)
    Osaka Spirit Screw Anchor (Steel) (Packaged)
    Easy installation just by driving the core rod. You can see the completion of construction at a glance and manage the construction. Holes, driving, and construction can be performed from above the equipment. Hardware installation, chair installation, vending machine installation, piping installat... Read More
    Material  Iron  Surface Treatment  Trivalent Chromate 
    Rating:
    94%
    from ₱357.30
    Min. 2 days
  6. Tight Anchor (Stainless Steel) (Individual Sale)
    A.Y. Fastener Tight Anchor (Stainless Steel) (Individual Sale)
    The completion of driving is obvious at a glance with simple construction just by driving the core rod. Construction is possible even from the top of the attachment. The body diameter and the nominal diameter of the screw are the same. The total length does not include the length of the pin. It i... Read More
    Material  Stainless steel (SUS304) 
    Rating:
    93%
    from ₱73.60
    Min. 2 days
  7. Stainless steel all anchor (pack product)
    Osaka Spirit Stainless steel all anchor (pack product)
    Made entirely of stainless steel and subjected to long-corrosion-resistant surface modification treatment (spack treatment), it demonstrates more corrosion resistance than ever before. Belt conveyor leg fixing, cap tree mounting, sanitary equipment mounting, step mounting, floor support bracket m... Read More
    Material  Stainless steel 
    Rating:
    87%
    from ₱1,191.97
    Min. 2 days
  8. Hammer Drive Pin Anchor, Screw Anchor (Stainless)
    SANKO TECHNO Hammer Drive Pin Anchor, Screw Anchor (Stainless)
    Ideal for construction sites where corrosion resistance is required. All stainless steel products. For construction work and equipment work where rust prevention is desired. For fixing belt conveyor legs, mounting caps, mounting sanitary fixtures, step mounting, floor support bracket mounting, et... Read More
    Type  Stainless steel  Material  Stainless steel (SUS304 series) 
    Rating:
    93%
    from ₱4,518.73
    Min. 2 days
  9. All anchor SC type (stainless steel)
    SANKO TECHNO All anchor SC type (stainless steel)
    Material  Stainless steel 
    Rating:
    87%
    from ₱188.73
    Min. 2 days
  10. Tight anchor (C type)
    A.Y. Fastener Tight anchor (C type)
    The completion of driving is obvious at a glance with simple construction just by driving the core rod. Construction is possible even from the top of the attachment. The body diameter and the nominal diameter of the screw are the same. It is used for equipment installation, sanitary equipment ins... Read More
    Surface Treatment  Electrogalvanized trivalent chromate  Material  Steel  Material (Bolt)  Steel (SWRCH10A)  Material (Nut)  Steel (SWRM10K) 
    Rating:
    88%
    from ₱1,562.03
    Min. 2 days
  11. All anchor
    TRUSCO All anchor
    Since it is a nut tightening type, the attachment can be removed. Since the construction is done by just driving the core rod, you can see the completion of the construction at a glance. Since the main body and the threaded part have the same diameter, drilling holes in concrete can be done with ... Read More
    Suitable Material  For concrete  Material / Finish  Steel 
    Rating:
    84%
    from ₱657.46
    Min. 2 days
  12. Rooty Anchor SC Type (Stainless Steel) (Piece Unit)
    UNIKA Rooty Anchor SC Type (Stainless Steel) (Piece Unit)
    Easy work and reliable construction just by driving a pin. Moreover, just by looking at the pin, you can surely confirm the completion of driving. Since the screw diameter and the diameter of the anchor body are the same, it is possible to drill holes after installing the equipment and perform an... Read More
    Abrasive Materials  Concrete, stone  Other  Core rod driving type  Surface Treatment  Pasipate processing  Material  Stainless steel 
    Rating:
    88%
    from ₱106.49
    Min. 2 days
  13. C type anchor (made of stainless steel)
    CARL C type anchor (made of stainless steel)
    The body, nuts and washers are all made of stainless steel.
    Rating:
    70%
    from ₱143.50
    Min. 2 days
  14. Core rod driving type anchor All anchor
    TRUSCO Core rod driving type anchor All anchor
    Since it is a nut tightening type, the attachment can be removed. Since the construction is done by just driving the core rod, you can see the completion of the construction at a glance. Since the main body and the threaded part have the same diameter, drilling holes in concrete can be done with ... Read More
    Rating:
    100%
    from ₱657.46
    Min. 2 days
  15. SC type high anchor (stainless steel)
    Sunrise SC type high anchor (stainless steel)
    It is sold as a single stainless steel. For concrete * The total length does not include the length of the pin.
    Suitable Material  For concrete  Material  Stainless steel 
    Rating:
    84%
    from ₱143.50
    Min. 2 days
  16. Tight anchor (stainless steel)
    A.Y. Fastener Tight anchor (stainless steel)
    The completion of driving is obvious at a glance with simple construction just by driving the core rod. Construction is possible even from the top of the attachment. The body diameter and the nominal diameter of the screw are the same. The total length does not include the length of the pin. It i... Read More
    Material  Stainless steel (SUS304) 
    Rating:
    90%
    from ₱3,083.35
    Min. 2 days
  17. Tight anchor (dub plating)
    A.Y. Fastener Tight anchor (dub plating)
    The completion of driving is obvious at a glance with simple construction just by driving the core rod. Construction is possible even from the top of the attachment. The body diameter and the nominal diameter of the screw are the same. It is used for equipment installation, sanitary equipment ins... Read More
    Surface Treatment  Hot-dip galvanized  Material (Bolt)  Steel (SWRCH8A)  Material  Dob plating  Material (Nut)  Steel (SWRM10K) 
    Rating:
    84%
    from ₱1,973.19
    Min. 2 days
  18. Rooty anchor SC type (stainless steel)
    UNIKA Rooty anchor SC type (stainless steel)
    Abrasive Materials  Concrete, stone  Other  Core rod driving type  Surface Treatment  Pasipate processing  Material  Stainless steel 
    Rating:
    87%
    from ₱3,658.98
    Min. 2 days
  19. Rooty anchor C type (steel)
    UNIKA Rooty anchor C type (steel)
    Easy work and reliable construction just by driving a pin. Moreover, just by looking at the pin, you can surely confirm the completion of driving. Since the screw diameter and the diameter of the anchor body are the same, it is possible to drill holes after installing the equipment and perform an... Read More
    Abrasive Materials  Concrete, stone  Other  Core rod driving type  Material  Steel 
    Rating:
    87%
    from ₱1,438.68
    Min. 2 days
  20. All anchor C type (Iron / Dob) (small box)
    SANKO TECHNO All anchor C type (Iron / Dob) (small box)
    * Tensile strength is the value when the concrete strength is 21N / mm 2.
    Surface Treatment  Dove  Material  Iron 
    Rating:
    100%
    from ₱4,111.26
    Min. 2 days
  21. Machine holder for all anchors AL-H-SDS type
    SANKO TECHNO Machine holder for all anchors AL-H-SDS type
    All anchors can be installed safely and reliably with a hammer drill. Comes with a window that allows you to see how the core rod is driven. Eliminates damage to the core rod and enables uniform construction even in places where it is difficult to hit a hammer. For all anchors, all anchors, const... Read More
    Type  (Applicable) All anchor C / SC type  Slide dimensions (mm)  35  Specification  Cylinder  Material  Steel 
    Rating:
    100%
    from ₱4,107.56
    Min. 2 days
  22. Rooty cut driving rod
    UNIKA Rooty cut driving rod
    The most common and reliable female thread anchor. There are no protrusions on the concrete surface after construction, and hexagon bolts, differential bolts, hanging bolts, etc. can be installed.
    from ₱451.87
    Min. 2 days
  23. SC all anchor
    TRUSCO SC all anchor
    An all-tenless product that is ideal for construction sites where corrosion resistance is required. You can see the completion of construction at a glance and manage the construction. For concrete. For construction work and equipment work where rust prevention is desired.
    Suitable Material  For concrete 
    Rating:
    80%
    from ₱1,109.74
    Min. 2 days
  24. Anti-corrosion protection cap for all anchors
    TRUSCO Anti-corrosion protection cap for all anchors
    The anticorrosion effect protects all anchors from rust for a long time. Maintenance costs are greatly reduced. Easy installation by just tightening with a spanner or the like. Anti-corrosion protective cap for all anchors * Do not stain the inside of the zinc hat (contact surface with metal) wit... Read More
    Rating:
    60%
    from ₱320.30
    Min. 2 days
  25. All anchor ST type (stainless steel) (small box)
    SANKO TECHNO All anchor ST type (stainless steel) (small box)
    Material  Stainless steel 
    from ₱2,631.06
    Min. 3 days
  26. All anchor T type (iron / 3valent white) (small box)
    SANKO TECHNO All anchor T type (iron / 3valent white) (small box)
    Material  Iron  Surface Treatment  Trivalent white 
    Rating:
    100%
    from ₱2,055.43
    Min. 3 days
  27. All anchor ST type (stainless steel)
    SANKO TECHNO All anchor ST type (stainless steel)
    Material  Stainless steel 
    from ₱201.06
    Min. 3 days
  28. All anchor SY type (stainless steel)
    SANKO TECHNO All anchor SY type (stainless steel)
    Material  Stainless steel 
    from ₱201.06
    Min. 3 days
  29. All anchor (pack product)
    Osaka Spirit All anchor (pack product)
    A screwless anchor that is ideal for installation in areas that do not need to be removed. Can be installed from above the equipment. Easy installation just by driving the core rod. Blind installation etc.
    Material  Iron  Surface Treatment  Trivalent Chromate 
    from ₱233.95
    Min. 2 days
  30. T all anchor
    TRUSCO T all anchor
    Equipment can be attached to any wall surface. Size variation according to the wall thickness. Easy construction. For concrete. Blind installation. Lighting equipment installation. Wiring / piping / hanging bracket installation.
    Suitable Material  For concrete  Material / Finish  Steel 
    from ₱353.19
    Min. 2 days
  31. Rooty anchor C type (hot dip galvanized)
    UNIKA Rooty anchor C type (hot dip galvanized)
    Reliable construction can be done by simply driving a pin. Just by looking at the pin, you can surely confirm the completion of driving. Dove plating specifications with excellent corrosion resistance. Construction / electricity / sanitation / air conditioning work, signboard / chair installation... Read More
    Surface Treatment  Hot-dip galvanized  Material  Steel 
    from ₱2,795.53
    Min. 2 days
  32. Hawk / Strike Anchor C Type Stainless Steel
    KFC Hawk / Strike Anchor C Type Stainless Steel
    The nominal diameter of the male screw and the diameter of the anchor body are the same, and it can be installed from above the attachment. The anchor can be expanded by driving the core rod, and no driving rod is required. For installation of concrete construction, electricity, piping, signboard... Read More
    Specification  Boxed  Suitable Material  For concrete  Material  Stainless steel (SUS304 equivalent) 
    from ₱3,658.98
    Min. 2 days
  33. Hawk / Strike Anchor C Type Steel
    KFC Hawk / Strike Anchor C Type Steel
    The nominal diameter of the male screw and the diameter of the anchor body are the same, and it can be installed from above the attachment. The anchor can be expanded by driving the core rod, and no driving rod is required. For installation of concrete construction, electricity, piping, signboard... Read More
    Specification  Boxed  Suitable Material  For concrete 
    from ₱1,233.09
    Min. 2 days
  34. ST all anchor (12 pieces)
    TRUSCO ST all anchor (12 pieces)
    Anchor ideal for installation in places that do not need to be removed. All stainless steel products. Easy installation just by driving the core rod. You can see the completion of construction at a glance and manage the construction. For concrete. Blind installation. Lighting equipment installati... Read More
    Maximum Tensile Load kN (kgf)  2.8(287)  Outer Diameter (Φmm)  Drill Diameter (Φmm)  4.3  Head Diameter (Φmm)  Suitable Material  For concrete  Material / Finish  Stainless steel 
    from ₱657.46
    Min. 2 days
  35. Straight anchor
    WAKI Straight anchor
    Work is speedy because it can be easily driven from the top of the equipment.
    Suitable Material  For concrete 
    from ₱151.72
    Min. 3 days
  36. All anchor SY type (stainless steel) (small box)
    SANKO TECHNO All anchor SY type (stainless steel) (small box)
    Material  Stainless steel 
    from ₱4,929.90
    Min. 3 days
  37. All anchor SC type (SUS316)
    SANKO TECHNO All anchor SC type (SUS316)
    Material  SUS316 
    from ₱320.30
    Min. 2 days
  38. All anchor SC type Stainless steel metric screw Pack product
    SANKO TECHNO All anchor SC type Stainless steel metric screw Pack product
    Material  Stainless steel 
    from ₱1,191.97
    Min. 3 days
  39. All anchor C type steel
    SANKO TECHNO All anchor C type steel
    Since it is a nut tightening type, it can be removed. Since the construction is done by just driving the core rod, you can see the completion of the construction at a glance. Since the main body and the threaded part have the same diameter, drilling holes in concrete can be done with a small diam... Read More
    Mass (g)  19.3  Screw Length (mm)  20  Maximum Tensile Load (kN)  3.9  Embedding Depth (mm)  30  Maximum Thickness to Fix (mm)  40  Pilot Hole Diameter (Φmm)  6.4  Overall Length (mm)  80  Trusco Part No.  818-7735  Specification  Boxed  Nominal Size of Screw  M6 
    from ₱3,658.98
    Min. 2 days
  40. All anchor FT type steel
    SANKO TECHNO All anchor FT type steel
    RoHS directive (corresponding to 10 substances)  Correspondence  Material  Steel 
    from ₱1,973.19
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 167

Set Ascending Direction