Due to the national holidays as Golden Week, we will close 2017/5/3~2017/5/5. This may cause delays with our responses. Thank you for your understanding.

Buy more than* S$200* and get FREE SHIPPING

Measurements Supplies

Sort by:
Showing 1 - 30 of 13,761 Results
Show: 30 60 90
VIEW: Grid View List View
Digital Multimeter
Sanwa Electric Instrument
41.79 SGD
ADD TO CART
Duty Ratio: 0.1 - 99%, Trunking: Buzzer sounds at 10ohm - 120ohm Open-circuit voltage : 0.4V, Diode Test: Open voltage about 1.5V, DC Voltage (V): 400m/4/40/400/500, Resistance (omega): 400/4k/40k/400k/4M/40M, AC Voltage (V): 4/40/400/500, Dimensions (Height H x Width W x Depth D) (mm): 108x56x11.5, Condenser Capacity (microF): n/50n/500n/5micro/50micro/200microF, Power: Coin type lithium battery CR2032(3V)x1, Cycle(Hz): 9.999/99.99/999.9/9.999k/60.00kHz, Weight (g): 85 (Body only), Type: Digital multimeter, TRUSCO Part Number: 284-8546, Accessories: Notebook type case Coin cell battery
Category Measurements Supplies > Electrical Measuring Instruments > Tester (Multimeter) > Digital Tester
Absolute Digimatic Calipers
Mitutoyo
399.90 SGD
Sum Roller: Available, External Output Terminal: Available, Battery Life: About 3.5 years (continuation 20000 hours), Maximum Response Speed: No limit, Repeat Pricision (mm): 0.01, Quantization Error: +/-1 count is not included., Minimum Displayed Amount (mm): 0.01, Power: SR44(button type silver oxide cell)x1, Specification: ABS (absolute) measurement function INC(incremental) measurement function Scale dirt detection function Battery voltage drop warning External output function (by using the separately sold connector cable, it can output the measurement data.) Hold function (by using the optional hold unit, displayed values can be made to “hold” (maintain).Cannot be combined with output function.)
Category Measurements Supplies > Caliper, Micro, Dial > Calipers, Height Gauge, Depth Gauge > Vernier Caliper > Digital Calipers
Stopwatch
Casio Computer
4.75(8)
29.02 SGD
ADD TO CART
Time Accuracy (%): 99.997685, Battery Life: About 3 years, Batteries: CR-2025 (attachment for monitor), Dimensions (Height H x Width W x Depth D) (mm): 62x63.5x17, Weight (g): 40.3, Color: Black, Material: Resin, Specification: 1/100 second measurement, 10 hour meters (normal measurement, addition measurement, lap split measurement and 1.2 rank simultaneous measurement)
Category Measurements Supplies > Electrical Measuring Instruments > Stopwatch and Timer > Stopwatch
General Purpose Pressure Gauge
Daiichi Keiki Seisakusho
37.74 - 54.19 SGD
Outer Diameter (phi mm): 100, Joint Size: G3/8B (PF)
Category Measurements Supplies > Industrial Measuring Instruments > Dynamometer, Load Cell, Torque, Pressure and Flowmeter > Pressure Gauge > Pressure Gauge
Neodymium Magnet
Magna
3.00(1)
78.90 SGD
Category Measurements Supplies > Magnetic Tool > Magnetic Material > Rare Earth Cobalt Magnet
M-Standard Calipers, Vernier Caliper
Mitutoyo
58.87 - 1,179.90 SGD
Category Measurements Supplies > Caliper, Micro, Dial > Calipers, Height Gauge, Depth Gauge > Vernier Caliper > Standard Type Calipers
Laser Distance Meter
BOSCH
4.67(6)
279.90 SGD
ADD TO CART
Measurement Pricision (mm): Distance measurement: +/- 1.5 standard measuring time / inclination measurement: +/- 0.2 degree (retouched) tilt angle deviations up to 45 degree +/- increase or decrease 0.01 degree.Deviation increases or decreases depending on the measuring environment., Storage Temperature Range (degree c): -20 - +50, Dust-proof Water-proof: IP54 (except battery compartment), Lazer Dot Diameter (phi mm) [Distance (m)]: (For measuring 10 m distance, 25 degree c ambient temperature) About 6, Measuring Range (m): Distance measurement: 0.05 to 80 / Pythagorean measurement slope:-60 to + 60 degree / tilt measurement: 0-360 degree, Measuring Unit: Distance measurement :0.1mm/ inclination measurement: 0.1 degree, Wavelength (nm): 635, Mounting Screw Hole Size: 1/4 inch [6.35 mm] (fo...
Category Measurements Supplies > Measuring Tape, "Convex", Tape measures, Distance measuring > Range Finder > Laser Distance Meter
Digital Vibration Meter
Showa Sokki
5.00(1)
1,189.90 SGD
ADD TO CART
Purpose: Vibration measurement for blowers used in automotive coating after drying. Vibration measurement of large-sized computer. To determine the electromagnetic valve actuation condition. Defect inspection of machine tools. General purpose engine m, Vibration measurement for blowers used in automotive coating after drying. Vibration measurement of large-sized computer. To determine the electromagnetic valve actuation condition. Defect inspection of machine tools. General purpose engine m, Battery Life (continuous use): 30 hours or more, Frequency Range (Hz): Acceleration: 5 to 5000 (+/- 1 dB), 5-10,000 (+/-3 dB) Speed: 10 to 1000 (based upon rated JIS B 0907 in relation with measuring instruments vibrating severely) Displacement: 10 to 1000 (1 dB), Detector: MODEL-2304A, Dimensions ...
Category Measurements Supplies > Environment Measuring Instruments > Environmental Measuring, Wind speed, Weather, Dust, Heater > Noise Level Meter, Seismograph, Vibration meter > Vibration Meter
Precise Level
Obishi Keiki Seisakusho
5.00(1)
209.90 - 359.90 SGD
Category Measurements Supplies > Goniometer and Spirit Level, Level and Survey > Spirit Level > Precision Level
Rubber Plastic Hardness Tester Standard
KORI SEIKI MFG
409.90 SGD
ADD TO CART
Spring Load Value 0 to -100 Degrees (mN): 550 - 8050, Minimum Scale Value: 2 degree, Dimensions (Width W x Depth D x Height H) (mm): 56x27x113, Needle Shape: Diameter 10mm, Weight (g): 280, Measuring Range: 0 - 100 degree
Category Measurements Supplies > Industrial Measuring Instruments > Other Measuring Instruments > Hardness Tester
Digital Force Gauge
SHIMPO
554.26 SGD
Pricision: +/-0.3R.C., Dimension (Length L x Width W x Thickness) (mm): 147x75x38, Accessories: -
Category Measurements Supplies > Industrial Measuring Instruments > Other Measuring Instruments > Force Gauge
Pressure Switch
Saginomiya Seisakusho
4.12(8)
84.36 - 89.52 SGD
Category Measurements Supplies > Industrial Measuring Instruments > Dynamometer, Load Cell, Torque, Pressure and Flowmeter > Accessories
Digital Scale Mini
AS ONE
3.67(3)
96.28 - 119.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order., Plate Diameter (mm): 120, Power: 3 AA batteries x, or AC adapter (included), Dimension (mm): 205x145x45
Category Measurements Supplies > Scale > Weighing Scale > Digital Weighing Scale
Digital Carbon Caliper
MonotaRO
20.98 - 22.62 SGD
Caution: Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Replace the batteries in case of no power or display flashes., Storage Humidity (%): 0-80, Storage Temperature (DegreeC): - 20-70, Repeat Pricision (mm): 0.1, Minimum Scale (mm): 0.1, Power: SR44 battery, Operating Temperature Range (deg C): 0-40, Accessories: Monitor battery
Category Measurements Supplies > Caliper, Micro, Dial > Calipers, Height Gauge, Depth Gauge > Vernier Caliper > Digital Calipers
Carbon Fiber Digital Caliper
Shinwa Rules
31.00 - 33.60 SGD
Storage Temperature (DegreeC): -10 - 60, Repeat Pricision (mm): 0.1, Minimum Scale (mm): 0.1, Allowable Temperature (degreeC): 0 - 40, Power: Oxidized silver battery SR44 x 1, Accessories: Case
Category Measurements Supplies > Caliper, Micro, Dial > Calipers, Height Gauge, Depth Gauge > Vernier Caliper > Digital Calipers
Hand-Held Refractometers
ATAGO
169.90 SGD
Purpose: Meets wide variety of industrial and food product needs - water soluble cutting oil, aqueous detergent liquid, various soluble liquids, fruit juice, refreshing soft drinks, carbonated drinks, soup, etc., Meets wide variety of industrial and food product needs - water soluble cutting oil, aqueous detergent liquid, various soluble liquids, fruit juice, refreshing soft drinks, carbonated drinks, soup, etc.
Category Measurements Supplies > Environment Measuring Instruments > Environmental Measuring, Wind speed, Weather, Dust, Heater > Refractometer > Hand refractometer
Pressure Gauge
Yamamoto Keiki
19.94 - 34.82 SGD
Purpose: For measuring air pressure, oil pressure, and other general pressure., For measuring air pressure, oil pressure, and other general pressure., Main Material: Brass, Pricision: +/-1.6%F.S.
Category Measurements Supplies > Industrial Measuring Instruments > Dynamometer, Load Cell, Torque, Pressure and Flowmeter > Pressure Gauge > Pressure Gauge
Thermometer Sensor, DP-350, Handy Type
RKC Instrument
4.00(2)
119.90 - 269.90 SGD
Category Measurements Supplies > Environment Measuring Instruments > Thermometer and Thermo Hygrometer > Thermo Couple
Digimatic Indicator 543
Mitutoyo
5.00(1)
219.90 - 439.90 SGD
Caution: ※ With regard to unaccompanied product, in the case of COD orders will be shipped after the next day, Minimum Range (mm): 0.01, Outer Frame Diameter (mm): 59, Series: 543
Category Measurements Supplies > Caliper, Micro, Dial > Dial Gauge > Digimatic Indicator
Digimatic Indicator
Mitutoyo
4.00(1)
339.90 SGD
ADD TO CART
Repeat Precision (mm): Below 0.002, Return Error (mm): Below 0.002, Wide Range bound for Accuracy (mm): 0.003 or less, Back Cover Specification: With lug, Battery Life (continuous use): 7000, Minimum Range (mm): 0.001, Gauge Head (mm): SPHERICAL R=1.5 (CEMENTED), Functions: Zero set function (Absolute origin set) preset function Direction switching function Tolerance judgment function Error alarm Output function Display of the rotation function (330 degree), Outer Frame Diameter (mm): 59, Quantization Error: +/-1 count not being included, Display: 6-DIGIT LCD, UNSIGNED, Measuring Force (N): 1.5, Power: SR44 (BUTTON-TYPE, SILVER OXIDE BATTERIES) 1 PIECE, Series: 543, Measuring Range (mm): 12.7, Weight (g): 170, Description 2: Characters 11 mm high DECA character has been put on a disp...
Category Measurements Supplies > Caliper, Micro, Dial > Dial Gauge > Digimatic Indicator
Taper Gauge, with Straight Ruler
Niigata Seiki
4.50(2)
20.72 SGD
ADD TO CART
Purpose: Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Overall Length x Thickness (mm) (Te - PA - GE - di): 148.5x1.2, Overall Length x Thickness (Scale) (mm): 155x0.5, Finishing: Hard chrome plating, Minimum Scale (mm): 0.1, Pricision (mm): +/-0.05, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-130 , Material: Hardened stainless steel, Type: Taper gauge
Category Measurements Supplies > Reference Instrument and Gauge > Taper Gauge
Digital Timer
dretec
4.67(6)
12.81 SGD
ADD TO CART
Alarm Sounding Time (sec): 30, Maximun Setup Time: 99 minituesute 99s alarm rings for about 30 minituesute, Dimensions (Height H x Width W x Depth D) (mm): 18x60x97, Weight (g): 63, Color: White, Material: ABS, Specification: Count up function. Repeat function.Slide type wall hook. Powerful magnet., Accessories: BATTERIES (SINGLE 4 SHAPE DRY CELL DC1.5V x 1PC)
Category Measurements Supplies > Electrical Measuring Instruments > Stopwatch and Timer > Timer
Inspection Mirrors
OsakaSpirit
8.80 - 8.99 SGD
Material (mirror): Glass
Category Measurements Supplies > Optical Measurement > Inspection Mirror, Inspection Lamp > Inspection mirror
Magnetic Stand
Mitutoyo
5.00(1)
119.90 SGD
ADD TO CART
Prop Size (mm): phi10x165, Main Pole Size (mm): phi 12 X 177, Magnet Dimension (Width x Depth x Height) (mm): 50x58x55, Mounting Hole Diameter (phi mm): phi6, phi8, Adsorption Ability (N): 600, TRUSCO Part Number: 273-6357
Category Measurements Supplies > Magnetic Tool > Magnetic Base, Desk Lamp > Magnet Base
Pressure Gauge
Nagano Keiki
56.30 - 83.73 SGD
Materials (share): CA203, Outer Diameter (phi mm): 60, Case Shape: No A-type vertical spit
Category Measurements Supplies > Industrial Measuring Instruments > Dynamometer, Load Cell, Torque, Pressure and Flowmeter > Pressure Gauge > Pressure Gauge
Digital Multi Meter
Sanwa Electric Instrument
4.80(5)
84.36 SGD
ADD TO CART
Condenser Capacity (F): 50N/500n/5 micro / 50 micro 100 micro / Highest accuracy 5% + 10 0.01 NF, Built-in Battery: R6P (double-A form) x2, Fuse: 0.5/250 V IR300A 6.3 x 30 mm dia., Safety Standards: IEC61010-1 CAT.[III]600V Max, Duty Ratio: 20% To 80 % Highest accuracy :0.5%+5, Diode Test: Open voltage about 1.5V , Electrical Connection Range (buzzer) (ohm): 10 to 80 open voltage: About 0.4V, Direct Current (A): m/400 40 m's Highest accuracy :2.8%+5 0.01 MA, Alternating Current (A): m/400 40 m's Highest accuracy :2.8%+5 0.01 MA, Sample Rate: Part number: about 2 / s, Frequency Characteristics: 40 - 400Hz, Character Height (mm): 17.5, Display: Numerical section: 4000, DC Voltage (V): 400 m/4/40/400/600 Highest accuracy :0.7%+3 Decomposition of function :0.1mV Input resistance: 10 M-100 M o...
Category Measurements Supplies > Electrical Measuring Instruments > Tester (Multimeter) > Digital Tester
Led Light Magnifier
MonotaRO
22.43 SGD
ADD TO CART
Caution: AAA battery not included, AAA battery not included, AAA battery not included, AAA battery not included, Material (lens): Glasses (optical lens), Batteries: AAA x 3 pieces (sold separately), Magnification: 10, Lens Diameter (phi mm): 30, Weight (g): 43, Dimension (mm): 106x39x26, Specification: With LED light, Accessories: W/pouch
Category Measurements Supplies > Optical Measurement > Loupe > Loupe with light
Pocket Microscope
CONTEC
3.67(3)
21.16 SGD
ADD TO CART
Purpose: It is an excellent magnifier useful for applications such as observation and examination., It is an excellent magnifier useful for applications such as observation and examination., Material (lens): Acrylic resin, Lighting System: LED light, Lighting Time: About 4 hours, External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): The time of storage /32x22x84, Magnification: (Enlargement ratio) approximately 60 to 100, Power: Button cell SR41Wx3 piece (battery attachment for a test), Weight (g): About 25 (battery included), Material (Body): ABS resin, elastomer resin
Category Measurements Supplies > Optical Measurement > Other Microscope
Thickness Gauge
Otokomae MonotaRO
6.69 - 48.89 SGD
Leaf Width (mm): 12.7
Category Measurements Supplies > Reference Instrument and Gauge > Feeler Gauge > Sickness gauge (set)
Pressure Gauge, Ф60
TOKO (Toyo Keiki Kogyo)
4.50(2)
21.41 - 42.11 SGD
Dimensions c(mm): 13, Dimensions b (mm): 32, Dimensions e (mm): 16, Connection Thread: 1/4G(PF), Dimensions D (mm): 58, Outer Diameter (phi mm): 60, Dimensions A (mm): 63
Category Measurements Supplies > Industrial Measuring Instruments > Dynamometer, Load Cell, Torque, Pressure and Flowmeter > Pressure Gauge > Pressure Gauge

1 2 3 4 5 6 7 8 9 10 ...459 Next